SUPERBRIGHT LED LAMP VAOL-10GSBY4 Feature § § § Package Dimension Low Power Consumption High Intensity I.C. compatible Applications § § § § Commercial Outdoor Sign Board Front Panel Indicator Dot-Matrix Module LED Bulb Description § § § These High Intensity LEDs are Based on InGaN/(ITO)Sapphire Materia Technology Emitted color:Blue Water Transparent Lens ＊Tolerance：± 0.01 0.25 Unit：± inch mm Absolute Maximum Ratings at Ta＝25℃ Symbol Parameter Max. Unit 100 mW PD Power Dissipation VR Reverse Voltage 5 V IAF Average Forward Current 25 mA IPF Peak Forward Current（Duty＝0.1，1kHz） 85 mA ― Derating Linear Form 25℃ 0.4 mA∕℃ Topr Operating Temperature Range –40 to ＋ 80 ℃ Tstg Storage Temperature Range –40 to ＋ 100 ℃ Lead Soldering Temperature [1.6mm（0.063inch）From Body] 260℃ For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta＝25℃ Symbol Parameter VF Forward Voltage IR Reverse Current △θ IV λp Half Intensity Angle Luminous Intensity Peak Wavelength Test Condition IF＝ 20 mA Min. Typ. Max. Unit 3.5 4.0 V 100 μA VR＝ 5 V IF＝ 20 mA 30 Deg. IF＝ 20 mA 7000 mcd. IF＝ 20 mA 470 nm Electrical Characteristics at Ta＝25℃ Symbol Iv VF λD Parameter Luminous Intensity Forward Voltage Dominant Wavelength Condition IF＝20mA IF＝20mA IF＝20mA Unit mcd V nm Grade Range Grade Range Grade Range BIN 21 4900~6900 P1 3.0~3.2 B6 465~470 BIN 22 6900~9700 P2 3.2~3.4 B7 470~475 P3 3.4~3.6 P4 3.6~3.8 P5 3.8~4.0 Binning Intensity: Tolerance of minimum and maximum = ± 15% Vf: Tolerance of minimum and maximum = ± 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. 2. Specific binning requirements –please contact our home office Radiation Diagram IF=20 mA 50% Power Angle Angle =30∘ BLUE Typical Electro-optical Characteristic Curves (25°C Free Air Temperature Unless Otherwise Specified)