UV LED LAMP VAOL-5EUV0T4 Feature Package Dimension Low Power Consumption I.C. compatible Applications Disinfection and Sterilization Adhesive Curing Leak Detection Authentication Description These LEDs are Based on InGaN Material Technology Emitted color: Purple (UV) Water Transparent Lens ＊Tolerance：± 0.01 0.25 Unit：± inch mm CAUTION : EMITS ULTRAVIOLET RADIATION!!! • This UV (ultraviolet) LED during operation radiates intense UV light. • Do Not look directly into the UV light during operation of device. This can be harmful to the human body especially to the eyes and skin, even for brief period due to the intense UV light. • If viewing the UV light is necessary, please use UV filtered glasses to avoid damage by the UV light. UV • If the UV LED in your product might be viewed directly, please affix a caution label to your product to that effect. • Avoid direct eye and skin exposure to the UV light. • Keep reach out of children. Absolute Maximum Ratings at Ta=25°C Symbol Parameter Max. Unit 120 mW PD Power Dissipation VR Reverse Voltage 5 V IAF Average Forward Current 30 mA IPF Peak Forward Current（Duty＝0.1，1kHz） 100 mA Derating Linear Form 25°C 0.4 mA/°C Topr Operating Temperature Range –20 to ＋ 80 °C Tstg Storage Temperature Range –20 to ＋ 100 °C Lead Soldering Temperature [1.6mm（0.063inch）From Body] 260°C For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta=25°C Symbol Parameter Test Condition Min. Typ. 2.8 3.0 VF Forward Voltage IF＝ 20 mA IR Reverse Current VR＝ 5 V Half Intensity Angle IF＝ 20 mA 10 IV Luminous Intensity IF＝ 20 mA λp Peak Wavelength IF＝ 20 mA ∆ Max. Unit 3.6 V 50 µA 15 20 Deg. -- 200 -- mcd. 400 405 -- nm Electrical Characteristics at Ta＝25℃ Symbol Iv VF λp Parameter Luminous Intensity Forward Voltage Peak Wavelength Condition IF＝20mA IF＝20mA IF＝20mA Unit mcd V nm Grade Range Grade Range Grade Range BIN10 125~175 P0 2.8~3.0 U6 400~405 BIN11 175~245 P1 3.0~3.2 U7 405~410 P2 3.2~3.4 P3 3.4~3.6 Binning Intensity: Tolerance of minimum and maximum = ± 15% Vf: Tolerance of minimum and maximum = ± 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. Radiation Diagram IF=20 mA 50% Power Angle Angle =15∘ UV