WILLAS 1.5KE91A

WILLAS
TVS
1.5KE
SERIES
GPP TRANSIENT VOLTAGE SUPPRESSOR
REVERSE VOLTAGE 6.8 to 600 Volts
Pb Free Product
PEAK PULSE POWER 1500 WATTS
FEATURES
1.5KE
* Glass passivated chip
* 1500 W peak pulse power capability
with a 10/1000 μ s waveform, repetitive
rate (duty cycle):0.01 %
BI-POLAR
* Low leakage
* Uni and Bidirectional unit
* Excellent clamping capability
* Very fast response time
* RoHS product for packing code suffix "G"
Halogen free product for packing code suffix "H"
UNI-POLAR
.042 (1.10)
DIA.
.037 (0.90)
1.0 (25.4)
MIN.
.210 (5.3)
.190 (4.8)
Case: Molded plastic, 1.5KE
Epoxy: UL 94V-O rate flame retardant
.210 (5.3)
.190 (4.8)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
Lead:MIL-STD-202E method 208C guaranteed
.042 (1.10)
DIA.
.037 (0.90)
.375 (9.5)
.335 (8.5)
.375 (9.5)
.335 (8.5)
MECHANICAL DATA
1.0 (25.4)
MIN.
Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
Parameter
Peak power dissipation with a 10/1000μs waveform
SYMBOL
PPP
Minimum 1500
Watts
Peak pulse current wih a 10/1000μs waveform
Power dissipation on infinite heatsink at TL = 75 °C
I PP
See Next Table
Amps.
PD
6.5
Watts
Peak forward surge current, 8.3 ms single half sinewave unidirectional only(1)
I FSM
200
Amps.
Maximum instantaneous forward voltage at 25 A for
unidirectional only (2)
VF
3.5/5.0
Volts
TJ , TSTG
–55 to +150
Operating junction and storage temperature range
VALUE
UNIT
℃
Note:
(1) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
(2) VF= 3.5V on 1.5KE6.8A thru 1.5KE200A devices and VF= 5.0V on 1.5KE220A thru 1.5KE600A devices.
2011-05
WILLAS ELECTRONIC CORP.
DIA.
WILLAS
TVS
1.5KE
SERIES
GPP TRANSIENT VOLTAGE SUPPRESSOR
REVERSE VOLTAGE 6.8 to 600 Volts
Pb Free Product
PEAK PULSE POWER 1500 WATTS
AMBIENAVERAGE FORWARD CURRENT, (A)
100
0
75
200
100
25
100
175
0
Peak Forward Surge Current, (A)
Peak Pulse Derating in % of Peak Power or
Current, %
RATING AND CHARACTERISTIC CURVES
50
25
160
25
50
75
100
125
150
175
200
100
30
80
40
0
200
1
Ambient Temperature ,Ta (℃)
10
Number of Cycles at 60 Hz
Fig. 1 - Pulse Derating Curve
100
Fig. 2 - Maximum Non-Repetitive
Surge Current
100
8.0
6.5
0.1
30
70
6.5
10000
0.45
175
0
7.0
6.0
Peak Power (kW)
0
Steady State Power Dissipation, (W)
TJ = TJ max.
8.3 ms Single Half Sine-Wave
120
0
0
1
5.0
4.0
3.0
10
1
2.0
1.0
0.1
0.0
0
25
50
75
100 125 150
Lead Temperature , TL (℃)
175
0.1
200
Fig. 3 - Steady State Power Derating Curve
Peak Pulse Current , (% )
Tr=10μs
100
50
0
0.2
0.5
1
1.5
2
3
4
Peak
0
Value ,
100
76
50
33
23
13
td 10
1
10
100
Pulse Width, td
1000
10000
FIG.4 - Peak Pulse Power Rating Curve
TJ = 25 °C
Pulse Width (td) is defined as
the point where the peak
current decays to 50 % of IPPM
Half Value = Ipp
2
10/1000 μsec. Waveform
as defined by R.E.A.
0
0
1
2
Time , (ms)
3
4
Fig. 5 - Pulse Waveform
2011-05
WILLAS ELECTRONIC CORP.
WILLAS
TVS
1.5KE
SERIES
GPP TRANSIENT VOLTAGE SUPPRESSOR
REVERSE VOLTAGE 6.8 to 600 Volts
1.5KE SERIES
Uni-polar
1.5KE6.8
1.5KE6.8A
1.5KE7.5
1.5KE7.5
1.5KE8.2
1.5KE8.2A
1.5KE9.1
1.5KE9.1A
1.5KE10
1.5KE10A
1.5KE11
1.5KE11A
1.5KE12
1.5KE12A
1.5KE13
1.5KE13A
1.5KE15
1.5KE15A
1.5KE16
1.5KE16A
1.5KE18
1.5KE18A
1.5KE20
1.5KE20A
1.5KE22
1.5KE22A
1.5KE24
1.5KE24A
1.5KE27
1.5KE27A
1.5KE30
1.5KE30A
1.5KE33
1.5KE33A
1.5KE36
1.5KE36A
1.5KE39
1.5KE39A
1.5KE43
1.5KE43A
1.5KE47
1.5KE47A
1.5KE51
1.5KE51A
1.5KE56
1.5KE56A
1.5KE62
1.5KE62A
1.5KE68
1.5KE68A
1.5KE75
1.5KE75A
1.5KE82
1.5KE82A
1.5KE91
1.5KE91A
1.5KE100
1.5KE100A
2011-05
Bi-polar
1.5KE6.8C
1.5KE6.8CA
1.5KE7.5C
1.5KE7.5CA
1.5KE8.2C
1.5KE8.2CA
1.5KE9.1C
1.5KE9.1CA
1.5KE10C
1.5KE10CA
1.5KE11C
1.5KE11CA
1.5KE12C
1.5KE12CA
1.5KE13C
1.5KE13CA
1.5KE15C
1.5KE15CA
1.5KE16C
1.5KE16CA
1.5KE18C
1.5KE18CA
1.5KE20C
1.5KE20CA
1.5KE22C
1.5KE22CA
1.5KE24C
1.5KE24CA
1.5KE27C
1.5KE27CA
1.5KE30C
1.5KE30CA
1.5KE33C
1.5KE33CA
1.5KE36C
1.5KE36CA
1.5KE39C
1.5KE39CA
1.5KE43C
1.5KE43CA
1.5KE47C
1.5KE47CA
1.5KE51C
1.5KE51CA
1.5KE56C
1.5KE56CA
1.5KE62C
1.5KE62CA
1.5KE62C
1.5KE62CA
1.5KE75C
1.5KE75CA
1.5KE82C
1.5KE82CA
1.5KE91C
1.5KE91CA
1.5KE100C
1.5KE100CA
PEAK PULSE POWER 1500 WATTS
Breakdown voltage VBR @ IT
Min (V)
6.12
6.46
6.75
7.13
7.38
7.79
8.19
8.65
9.00
9.50
9.90
10.45
10.80
11.40
11.70
12.35
13.50
14.25
14.40
15.20
16.20
17.10
18.00
19.00
19.80
20.90
21.60
22.80
24.30
25.65
27.00
28.50
29.70
31.35
32.40
34.20
35.10
37.05
38.70
40.85
42.30
44.65
45.90
48.45
50.40
53.20
55.80
58.90
61.20
64.60
67.50
71.25
73.80
77.90
81.90
86.45
90.00
95.00
Max (V)
7.48
7.14
8.25
7.88
9.02
8.61
10.01
9.56
11.00
10.50
12.10
11.55
13.20
12.60
14.30
13.65
16.50
15.75
17.60
16.80
19.80
18.90
22.00
21.00
24.20
23.10
26.40
25.20
29.70
28.35
33.00
31.50
36.30
34.65
39.60
37.80
42.90
40.95
47.30
45.15
51.70
49.35
56.10
53.55
61.60
58.80
68.20
65.10
74.80
71.40
82.50
78.75
90.20
86.10
100.10
95.55
110.00
105.0
IT (mA)
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Reverse
Leakage
IR(uA)
@VRWM
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Pb Free Product
Maximum
Working
Reverse
PeakRevers
Surge
e Voltage
Current
VRWM
Ipp(A)
@10x1000us
(Volts)
sinewave
5.5
139
5.8
143
6.1
128
6.4
133
6.6
120
7.0
124
7.4
109
7.8
112
8.1
100
8.6
103
8.9
92.6
9.4
96.2
9.7
86.7
10.2
89.8
10.5
78.9
11.1
82.4
12.1
68.2
12.8
70.8
12.9
63.8
13.6
66.7
14.5
56.6
15.3
59.5
16.2
51.5
17.1
54.2
17.8
47.0
18.8
49.0
19.4
43.2
20.5
45.2
21.8
38.4
23.1
40.0
24.3
34.5
25.6
36.2
26.8
31.4
28.2
32.8
29.1
28.8
30.8
30.1
31.6
26.6
33.3
27.8
34.8
24.2
36.8
25.3
38.1
22.1
40.2
23.1
41.3
20.4
43.6
21.4
45.4
18.6
47.8
19.5
50.2
16.9
53.0
17.6
55.1
15.3
58.1
16.3
60.7
13.9
64.1
14.6
66.4
12.7
70.1
13.3
73.7
11.5
77.8
12.0
81.0
10.4
85.5
10.9
Maximum
Clamping
Voltage
Vc (Volts)
@Ipp
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52.0
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77.0
89.0
85.0
98.0
92.0
108
103
118
113
131
125
144
137
WILLAS ELECTRONIC CORP.
WILLAS
TVS
1.5KE
SERIES
GPP TRANSIENT VOLTAGE SUPPRESSOR
REVERSE VOLTAGE 6.8 to 600 Volts
1.5KE SERIES
Uni-polar
1.5KE110
1.5KE110A
1.5KE120
1.5KE120A
1.5KE130
1.5KE130A
1.5KE150
1.5KE150A
1.5KE160
1.5KE160A
1.5KE170
1.5KE170A
1.5KE180
1.5KE180A
1.5KE200
1.5KE200A
1.5KE220
1.5KE220A
1.5KE250
1.5KE250A
1.5KE300
1.5KE300A
1.5KE350
1.5KE350A
1.5KE380
1.5KE380A
1.5KE400
1.5KE400A
1.5KE440
1.5KE440A
1.5KE500
1.5KE500A
1.5KE520
1.5KE520A
1.5KE550
1.5KE550A
1.5KE600
1.5KE600A
Note:
Bi-polar
1.5KE110C
1.5KE110CA
1.5KE120C
1.5KE120CA
1.5KE130C
1.5KE130CA
1.5KE150C
1.5KE150CA
1.5KE160C
1.5KE160CA
1.5KE170C
1.5KE170CA
1.5KE180C
1.5KE180CA
1.5KE200C
1.5KE200CA
1.5KE220C
1.5KE220CA
1.5KE250C
1.5KE250CA
1.5KE300C
1.5KE300CA
1.5KE350C
1.5KE350CA
1.5KE380C
1.5KE380CA
1.5KE400C
1.5KE400CA
1.5KE440C
1.5KE440CA
1.5KE500C
1.5KE500CA
1.5KE520C
1.5KE520CA
1.5KE550C
1.5KE550CA
1.5KE600C
1.5KE600CA
PEAK PULSE POWER 1500 WATTS
Breakdown voltage VBR @ IT
Min (V)
99.00
104.5
108.0
114.0
117.0
123.5
135.0
142.5
144.0
152.0
153.0
161.5
162.0
171.0
180.0
190.0
198.0
209.0
225.0
237.5
270.0
285.0
315.0
332.5
342.0
361.0
360.0
380.0
396.0
418.0
450.0
475.0
468.0
494.0
495.0
522.5
540.0
570.0
Max (V)
121.0
115.5
132.0
126.0
143.0
136.5
165.0
157.5
176.0
168.0
187.0
178.5
198.0
189.0
220.0
210.0
242.0
231.0
275.0
262.5
330.0
315.0
385.0
367.5
418.0
399.0
440.0
420.0
484.0
462.0
550.0
525.0
572.0
546.0
605.0
577.5
660.0
630.0
IT (mA)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Reverse
Leakage
IR(uA)
@VRWM
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Pb Free Product
Maximum
Working
Maximum
Reverse
PeakRevers
Clamping
Surge
e Voltage
Voltage
Current
VRWM
Vc (Volts)
Ipp(A)
@Ipp
@10x1000us
(Volts)
sinewave
89.2
9.49
158
94.0
9.87
152
97.2
8.67
173
102
9.09
165
105
8.02
187
111
8.38
179
121
6.98
215
128
7.25
207
130
6.52
230
136
6.85
219
138
6.15
244
145
6.41
234
146
5.81
258
154
6.10
246
162
5.23
287
171
5.47
274
175
4.36
344
185
4.57
328
202
4.17
360
214
4.36
344
243
3.49
430
256
3.62
414
284
2.98
504
299
3.11
482
309
2.74
547
325
2.86
524
325
2.60
576
342
2.72
552
357
2.37
634
376
2.47
607
406
2.08
720
428
2.17
690
422
2.00
749
445
2.09
718
447
1.89
792
470
1.98
759
487
1.74
864
513
1.81
828
1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device.
2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices.
3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double .
4. For Uni-directional devices VF max=3.5v at IF=25 A 300us square wave pulse.
2011-05
WILLAS ELECTRONIC CORP.