05458 1.5KE SERIES Only One Name Means ProTek’Tion™ 1500 WATT TVS COMPONENT DESCRIPTION The 1.5KE Series, are discrete 15,00 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 1.5KE series is available in voltages ranging from 6.8V to 600V and is compatible with IEC 61000-4-5 (Surge) requirements. AXIAL LEAD PACKAGE FEATURES APPLICATIONS • UL File Recognition #E208219 • Compatible with IEC 61000-4-5 (Surge) • 1,500 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bidirectional Configurations • Low Leakeage • Excellent Clamping Capability • Glass Passivated Chip • Very Fast Response Time • Easy Mounting to Printed Circuit Board • Available in Multiple Voltages Ranging From 6.8V to 600V • RoHS Complaint (Exemption #7) • DC & AC Applications • Remote Transmission Lines • Industrial Wiring MECHANICAL CHARACTERISTICS • Molded Case • Approximate Weight: 0.84 grams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 05458.R2 12/14 Page 1 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature TA -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Power (tp =10/1000µs) - See Figure 1 and Note 2 PPP 1,500 Watts Power Dissipation on Infinite Heatsink at TL = 75°C PD 6.5 Watts Peak Forward Surge Current, 8.3ms single half sinewave - Unidirectional Only (Note 2) IFSM 200 Amps Maximum Instantaneous Forward Voltage at 100A - Unidirectional Only (Note 3) VF 3.5/5.0 V NOTE 1. Non-repetitive current pulse per Figure 2 and derated above TA = 25°C per Figure 2. 2. Measured on 8.3ms single half sinewave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 3. VF < 3.5V for devices of VBR <200V and VF <5.0V for devices of VBR > 201V. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) REVERSE STAND-OFF VOLTAGE BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA VRWM VOLTS MIN MAX @ IT mA 1.5KE6.8 5.5 6.12 7.48 10 10.8 139.0 1000 1.5KE6.8A 5.8 6.46 7.14 10 10.5 143.0 1000 1.5KE7.5 6.1 6.75 8.25 10 11.7 128.0 500 1.5KE7.5A 6.4 7.13 7.88 10 11.3 133.0 500 1.5KE8.2 6.6 7.38 9.02 10 12.5 120.0 200 1.5KE8.2A 7.0 7.79 8.61 10 12.1 124.0 200 1.5KE9.1 7.4 8.19 10.01 1 13.8 109.0 50 1.5KE9.1A 7.8 8.65 9.56 1 13.4 112.0 50 1.5KE10 8.1 9.00 11.00 1 15.0 100.0 10 1.5KE10A 8.6 9.50 10.50 1 14.5 103.0 10 1.5KE11 8.9 9.90 12.10 1 16.2 92.6 5 1.5KE11A 9.4 10.45 11.55 1 15.6 96.2 5 1.5KE12 9.7 10.80 13.20 1 17.3 86.7 5 1.5KE12A 10.2 11.40 12.60 1 16.7 89.8 5 1.5KE13 10.5 11.70 14.30 1 19.0 79.0 1 1.5KE13A 11.1 12.35 13.65 1 18.2 82.4 1 1.5KE15 12.1 13.50 16.50 1 22.0 68.2 1 1.5KE15A 12.8 14.25 15.75 1 21.2 70.8 1 1.5KE16 12.9 14.40 17.60 1 23.5 63.8 1 1.5KE16A 13.6 15.20 16.80 1 22.5 66.7 1 1.5KE18 14.5 16.20 19.80 1 26.5 56.6 1 1.5KE18A 15.3 17.10 18.90 1 25.2 59.5 1 05458.R2 12/14 Page 2 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) REVERSE STAND-OFF VOLTAGE BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS VRWM VOLTS MIN MAX @ IT mA MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA 1.5KE20 16.2 18.00 22.00 1 29.1 51.6 1 1.5KE20A 17.1 19.00 21.00 1 27.7 54.2 1 1.5KE22 17.8 19.80 24.20 1 31.9 47.0 1 1.5KE22A 18.8 20.90 23.10 1 30.6 49.0 1 1.5KE24 19.4 21.60 26.40 1 34.7 43.2 1 1.5KE24A 20.5 22.80 25.20 1 33.2 45.2 1 1.5KE27 21.8 24.30 29.70 1 39.1 38.4 1 1.5KE27A 23.1 25.65 28.35 1 37.5 40.0 1 1.5KE30 24.3 27.00 33.00 1 43.5 34.5 1 1.5KE30A 25.6 28.50 31.50 1 41.4 36.2 1 1.5KE33 26.8 29.70 36.30 1 47.7 31.5 1 1.5KE33A 28.2 31.35 34.65 1 45.7 32.8 1 1.5KE36 29.1 32.40 39.60 1 52.0 28.9 1 1.5KE36A 30.8 34.20 37.80 1 49.9 30.1 1 1.5KE39 31.6 35.10 42.90 1 56.4 26.6 1 1.5KE39A 33.3 37.05 40.95 1 53.9 27.8 1 1.5KE43 34.8 38.70 47.30 1 61.9 24.2 1 1.5KE43A 36.8 40.85 45.15 1 59.3 25.3 1 1.5KE47 38.1 42.30 51.70 1 67.8 22.1 1 1.5KE47A 40.2 44.65 49.35 1 64.8 23.2 1 1.5KE51 41.3 45.90 56.10 1 73.5 20.4 1 1.5KE51A 43.6 48.45 53.55 1 70.1 21.4 1 1.5KE56 45.4 50.40 61.60 1 80.5 18.6 1 1.5KE56A 47.8 53.20 58.80 1 77.0 19.5 1 1.5KE62 50.2 55.80 68.20 1 89.0 16.9 1 1.5KE62A 53.0 58.90 65.10 1 85.0 17.7 1 1.5KE68 55.1 61.20 74.80 1 98.0 15.3 1 1.5KE68A 58.1 64.60 71.40 1 92.0 16.3 1 1.5KE75 60.7 67.50 82.50 1 108.0 13.9 1 1.5KE75A 64.1 71.25 78.75 1 103.0 14.6 1 1.5KE82 66.4 73.80 90.20 1 118.0 12.7 1 1.5KE82A 70.1 77.90 86.10 1 113.0 13.3 1 1.5KE91 73.7 81.90 100.10 1 131.0 11.5 1 1.5KE91A 77.8 86.45 95.55 1 125.0 12.0 1 05458.R2 12/14 Page 3 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) REVERSE STAND-OFF VOLTAGE VRWM VOLTS BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS MIN @ IT mA MAX MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA 1.5KE100 81.0 90.00 110.00 1 144.0 10.4 1 1.5KE100A 85.5 95.00 105.00 1 137.0 11.0 1 1.5KE110 89.2 99.00 121.00 1 158.0 9.5 1 1.5KE110A 94.0 104.50 115.50 1 152.0 9.9 1 1.5KE120 97.2 108.00 132.00 1 173.0 8.7 1 1.5KE120A 102.0 114.00 126.00 1 165.0 9.1 1 1.5KE130 105.0 117.00 143.00 1 187.0 8.0 1 1.5KE130A 111.0 123.50 136.50 1 179.0 8.4 1 1.5KE150 121.0 135.00 165.00 1 215.0 7.0 1 1.5KE150A 128.0 142.50 157.50 1 207.0 7.3 1 1.5KE160 130.0 144.00 176.00 1 230.0 6.5 1 1.5KE160A 136.0 152.00 168.00 1 219.0 6.9 1 1.5KE170 138.0 153.00 187.00 1 244.0 6.2 1 1.5KE170A 145.0 161.50 178.50 1 234.0 6.4 1 1.5KE180 146.0 162.00 198.00 1 258.0 5.8 1 1.5KE180A 154.0 171.00 189.00 1 246.0 6.1 1 1.5KE200 162.0 180.00 220.00 1 287.0 5.2 1 1.5KE200A 171.0 190.00 210.00 1 274.0 5.5 1 1.5KE220 175.0 198.00 242.00 1 344.0 4.4 1 1.5KE220A 185.0 209.00 231.00 1 328.0 4.6 1 1.5KE250 202.0 225.00 275.00 1 360.0 4.2 1 1.5KE250A 214.0 237.50 262.50 1 344.0 4.4 1 1.5KE300 243.0 270.00 330.00 1 430.0 3.5 1 1.5KE300A 256.0 285.00 315.00 1 414.0 3.6 1 1.5KE350 284.2 315.00 385.00 1 504.0 3.0 1 1.5KE350A 299.3 332.50 367.50 1 482.0 3.1 1 1.5KE380 308.6 342.00 418.00 1 547.2 2.7 1 1.5KE380A 324.9 361.00 399.00 1 524.4 2.9 1 1.5KE400 324.8 360.00 440.00 1 574.0 2.6 1 1.5KE400A 342.0 380.00 420.00 1 548.0 2.7 1 1.5KE440 357.3 396.00 484.00 1 631.0 2.4 1 1.5KE440A 376.2 418.00 462.00 1 602.0 2.5 1 1.5KE500 406.0 450.00 550.00 1 720.0 2.1 1 1.5KE500A 427.5 475.00 525.00 1 690.0 2.2 1 05458.R2 12/14 Page 4 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) REVERSE STAND-OFF VOLTAGE BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS VRWM VOLTS MIN MAX @ IT mA MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA 1.5KE520 422.2 468.00 572.00 1 748.8 2.0 1 1.5KE520A 444.6 494.00 546.00 1 717.6 2.1 1 1.5KE550 446.6 495.00 605.00 1 792.0 1.9 1 1.5KE550A 470.3 522.50 577.50 1 759.0 2.0 1 1.5KE600 487.2 540.00 660.00 1 864.0 1.7 1 1.5KE600A 513.0 570.00 630.00 1 828.0 1.8 1 NOTE 1. Suffix ‘A’ denotes 5% tolerance, without ‘A’ denotes 10% tolerance. 2. Add suffix ‘C’ or ‘CA’ after part number to specify a bidrectional device. 3. For bidirectional devices having a VRWM of 10 Volts and under, the IR limit is double. 05458.R2 12/14 Page 5 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kilowatts 100 10 1.5kW, 10/1000µs Waveform 1 0.1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 FIGURE 3 POWER DERATING CURVE FIGURE 2 PULSE WAVEFORM 100 TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP tf 100,000 td = t/(IPP/2) 50 60 40 20 e 0 0 -t 1 2 0 3 05458.R2 12/14 0 25 50 75 100 125 150 TA - Ambient Temperature - °C t - Time - ms Page 6 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 4 TYPICAL JUNCTION CAPACITANCE 10,000 CJ - Junction Capacitance - pF Bidirectional V-0V Unidirectional V-0V 1,000 Unidirectional @ VR 100 TJ = 25°C f = 1MHz VSIA = 50mVp-p 10 1 Bidirectional @ VR 10 100 VBR - Reverse Breakdown Voltage - V FIGURE 6 STEADY STATE POWER DERATING CURVE FIGURE 5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.0 Steady State Power Dissipation - Watts IFSM - Peak Forward Surge Current - A 200 160 120 80 40 0 1,000 1 05458.R2 12/14 10 Number of Cycles at 60 Hz 100 Page 7 7.0 6.0 4.0 2.0 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 175 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ AXIAL LEAD PACKAGE INFORMATION OUTLINE DIMENSIONS DIM MILLIMETERS INCHES MIN MAX MIN MAX A 24.5 - 1.00 - B 7.24 9.53 0.285 0.375 C 24.5 - 1.00 - D 0.97 DIA. 1.07 DIA. 0.038 DIA. 0.042 DIA. E 4.79 5.30 0.189 0.209 A E NOTES 1. Dimensions are exclusive of mold flash and metal burrs. B C D 05458.R2 12/14 Page 8 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ TAPE AND REEL E Z A 90° ±5° L1 B L2 E T SPECIFICATIONS REEL DIA. A B E MAX L1 L2 T Z MAX 330mm (13”) 10.0 ± 0.5 52.0 ± 0.5 1.00 21.8 ± 0.5 21.8 ± 0.5 6.0 ± 0.4 1.20 NOTES 1. Dimensions are in millimeters. 2. Axial lead product is taped and reeled in accordance with RS-296-E. 3. Marking on Part - part number, logo and polarity band (Unidirectional Only). ORDERING INFORMATION BASE PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY 1.5KExxx N/A -T13 1,200 13” n/a 1.5KExxxA N/A -T13 1,200 13” n/a 1.5KExxxC N/A -T13 1,200 13” n/a 1.5KExxxCA N/A -T13 1,200 13” n/a 05458.R2 12/14 Page 9 www.protekdevices.com 05458 1.5KE SERIES Only One Name Means ProTek’Tion™ COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: [email protected] Europe Sales: [email protected] U.S. Sales: [email protected] Distributor Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2014 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05458.R2 12/14 Page 10 www.protekdevices.com