Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 7448261418 STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMB DATUM / DATE : 2008-08-12 A Mechanische Abmessungen / dimensions: XXL A B C D E F G mm mm mm mm mm mm mm 43 max. 23,5 max. 10,5 ± 0,5 18,5 ± 0,5 43,0 max. 3,0 ± 0,5 1,5 typ. B Elektrische Eigenschaften / electrical properties: Eigenschaften / properties Leerlauf-Induktivität / inductance DC-Widerstand / DC-resistance Nennstrom / nominal current Nennspannung / nominal voltage Testbedingungen / test conditions Wert / value Einheit / unit tol. 10 kHz / 50µA LO 1,8 mH ±30% 1 @ 25°C RDC 7,9 mΩ ±10% N1 IDC 14,0 A max. UN 250 VAC typ. D Prüfgeräte / test equipment: 6 N2 12 7 E Testbedingungen / test conditions: WAYNE KERR WK3260B/WK3265 für/for L0/LN und/and RDC Luftfeuchtigkeit / humidity: 33% HP 34401 A für/for IN Umgebungstemperatur / temperature: +25°C Prüfspannung / testing voltage N1/N2 1500 V,50 Hz 5 mA / 2 sec. F Werkstoffe & Zulassungen / material & approvals G Eigenschaften / general specifications: Sockel / base: UL94V-0 Klimabeständigkeit/ climatic class: Draht / wire: Class F Betriebstemp. / operating temperature: Kleber / glue: UL94V-2 Übertemperatur / temperature rise: 40/125/21 -40°C - + 125°C < 55 K It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. Freigabe erteilt / general release: .................................................................................. Datum / date .................................................................................. Geprüft / checked Kunde / customer .................................................................................. Unterschrift / signature Würth Elektronik .................................................................................. Kontrolliert / approved MST Version 2 MST Version 1 Name Änderung / modification 08-08-12 07-11-29 Datum / date This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. D-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 1 VON 1