Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 744761087C LF Keramik-SMD-Induktivität WE-KI Ceramic-SMD-Inductor WE-KI DATUM / DATE : 2006-10-16 A Mechanische Abmessungen / dimensions: B Größe / size 0603C A B C D F H I J C F A 1,65 ± 0,2 1,15 ± 0,2 0,9 ± 0,2 0,5 ref. 0,30 ± 0,1 0,762 0,625 0,65 mm mm mm mm mm mm mm mm D B Elektrische Eigenschaften / electrical properties: Eigenschaften / properties Induktivität / inductance Güte Q / Q factor DC-Widerstand / DC-resistance Nennstrom / rated current Eigenres.-Frequenz / self-res.-frequency Testbedingungen / test conditions C Lötpad / soldering spec.: Wert / value Einheit / unit tol. nH ±5% 250 MHz L 8,7 250 MHz Q 28 min. RDC 0,10 max. IDC 700 mA max. SRF 4600 MHz min. T = 15 K D Prüfgeräte / test equipment: H I J I E Testbedingungen / test conditions: Agilent 4287A + HP 16193A für/for L und/and Q Luftfeuchtigkeit / humidity: 60 70% HP 4338B für/for RDC Umgebungstemperatur / temperature: 25°C HP 4285A + 42841A + 42842C + 42851-6110 für/for IDC ENA 5071B für/for SRF F Werkstoffe & Zulassungen / material & approvals: G Eigenschaften / general specifications: Basismaterial / base material: Keramik/ ceramic Umgebungstemperatur / ambient temperature: -40°C ~ + 110°C Kontaktmaterial / contact plating: Mo/Mn + Ni + Au Betriebstemperatur / operating temperature: -40°C ~ +125°C Lagerbedingungen / storage conditions: -10°C ~ + 40°C 30 ~ 70% RH Freigabe erteilt / general release: .................................................................................. Datum / date .............................................................. Geprüft / checked Kunde / customer .................................................................................. Unterschrift / signature Würth Elektronik Skle ........................................................................ Kontrolliert / approved Name Version 1 06-11-27 Änderung / modification Datum / date This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 1 VON 1