Translucent Polycarbonate (1591 Series) Molded in Flame Retardant Polycarbonate KEY FEATURES • Electronic instrument enclosures, designed for mounting printed circuit boards. • Ideally suited for modern styling or where internal components need to be visible. • Molded in flame retardant translucent polycarbonate (material carries a UL flammability rating of 94V-0). • Integral card guides accept 1.5 mm (0.062”) P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54 • Molded from translucent, ice blue or infrared translucent red polycarbonate. Visit our web site for color & detail photos of each part. • Lid is secured with M3 x 10 mm Philips machine screws, threaded into tapped integral brass bushings. ACCESSORIES 6 © P.C. Board Card Adaptors Allows horizontal mounting of P.C. board(s). See “Accessories Section” for full details! 1591Z6 - Package of 6 1591Z50 - Package of 50 1591Z100 - Package of 100 Flange Kits Mount to either the rear (using glue) or can be attached to the lid using existing lid screws and holes. See “Accessories Section” for full details! Replacement Screws Machine screws, nickel plated, M3 - 0.5 x 10mm 1591MS100 - Package of 100 Belt or Pocket Clip Molded from tough nylon, includes 2 nylon screws and mounting template. 1599CLIP - Black 1599CLIPGY - Grey Hammond Manufacturing Co. Ltd. 394 Edinburgh Rd. North Guelph, Ontario N1H 1E5 CANADA Phone: 519-822-2960 Fax: 519-822-0715 ww w.h am mo ndm fg.c om Hammond Manufacturing Co. Inc. 256 Sonwil Dr. Cheektowaga, NY 14225 USA Phone: 716-651-0086 Fax: 716-651-0726 Translucent Polycarbonate (1591 Series) Lid (Inside & Edge View) Par t Number I ce Blue I R Red 1591ATBU 1591ATRD 1591BTBU 1591BTRD 1591CTBU 1591CTRD 1591DTBU 1591DTRD 1591ETBU 1591ETRD Units inch mm inch mm inch mm inch mm inch mm Top View P. C. Card Clearance Dimensions A B 3.9 100 4.4 112 4.7 120 5.9 150 7.5 191 2.0 50 2.4 62 2.6 65 3.2 80 4.3 110 C (No Lid) 0.8 21 1.1 27 1.4 36 1.8 46 2.2 57 F G J K 3.4 86 3.9 98 4.2 106 5.4 136 6.9 176 1.4 36 1.9 48 2.0 51 2.6 66 3.8 96 1.1 29 1.6 41 1.7 44 2.3 59 3.5 89 3.1 79 3.5 91 3.9 99 5.0 129 6.6 170 NOTES: - Assembled height = dimension “C” + 0.16” (4.0 mm) - Average wall thickness: 0.06” (1.5 mm) Same high quality construction as our ABS plastic series (brass inserts & machine screws) for repetitive assembly & disassembly... © Hammond Manufacturing Co. Ltd. 394 Edinburgh Rd. North Guelph, Ontario N1H 1E5 CANADA Phone: 519-822-2960 Fax: 519-822-0715 ww w.h am mo ndm fg.c om Hammond Manufacturing Co. Inc. 256 Sonwil Dr. Cheektowaga, NY 14225 USA Phone: 716-651-0086 Fax: 716-651-0726 7