PLASTIC ENCLOSURES 9C-R1 www.hammondmfg.com Contents Instrument ABS Plastic Enclosures (RM Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Project Enclosures (RL Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hand-Held ABS Plastic (RL Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ABS Plastic - Hand-Held (RH Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Watertight ABS Plastic (RP Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Sealed - ABS Plastic (RS Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Watertight Polycarbonate (RP Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Watertight - Deep Lid (RP Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Additional Hammond Literature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Factory Modified Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Hammond on the Web. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Hammond Manufacturing and RITEC Enclosures are pleased to announce a global cooperation for the manufacturing and sales of their wide range of diecast, plastic, and metal enclosures. With inventory in America, Europe, and Asia, the RITEC range of quality products is available with high service levels. For full technical and distribution information, please see www.hammondmfg.com under the “More Enclosures” section. RITEC information is available as well at www.ritec.com.tw. Printed in Canada. 2 www.hammondmfg.com Instrument ABS Plastic Enclosures (RM Series) Key Features: • Designed to house P.C. boards - for instrument use. • Molded in light grey - general purpose ABS plastic with a light texture (front & rear panels are smooth). Material carries a UL flammability rating of UL94 HB. • Two part - clam shell construction. Bottom half includes molded in standoffs for easy P.C. board installation. Larger enclosures also include P.C. board standoffs on the top half. Four short M3 screws included • Front & rear panels are interchangeable and easily removable for modifications. • Tongue and groove construction provides protection against dust & water. Designed to meet IP43. • Includes two (or four) - assembly screws (depending on size). • All units except the RM2015S and RM2055S are secured with M3 Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. The RM2015S and RM2055S use self tapping Philips screws. • Options include replacement IR translucent or aluminum panels. Part Number Color RM2015S Grey RM2015M Grey RM2015L Grey RM2055S Grey RM2055M Grey RM2055L Grey RM2095S Grey RM2095M Grey RM2095L Grey Units inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm Length 5.12 130 5.12 130 5.12 130 7.48 190 7.48 190 7.48 190 9.84 250 9.84 250 9.84 250 Width 3.94 100 3.94 100 3.94 100 5.51 140 5.51 140 5.51 140 7.09 180 7.09 180 7.09 180 Enclosure Depth (Assembled) 1.18 30 1.97 50 2.76 70 1.18 30 1.97 50 2.76 70 1.97 50 2.95 75 3.94 100 Technical references and CAD downloads available at www.hammondmfg.com 3 www.hammondmfg.com Project Enclosures (RL Series) Key Features: • Designed to house P.C. boards - for hand-held use or wall mount. • Molded in light grey - general purpose ABS plastic with a light texture. • Two part construction. Both halves include smooth recessed area for membrane, label or silkscreen (see chart below for recess size). • P.C. board standoffs are molded into both halves of the enclosure. • Designed to meet IP54. • All sizes also available in a flanged lid version. • Includes four - M3 assembly screws. Part Number (With Flanged Part Number Lid) RL6105 RL6105-F RL6115 RL6115-F RL6215 RL6215-F RL6225 RL6225-F RL6335 RL6335-F RL6365 RL6365-F RL6435 RL6435-F RL6465 RL6465-F RL6555 RL6555-F RL6585 RL6585-F RL6655 RL6655-F RL6685 RL6685-F Units inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm Length 3.15 80 3.15 80 4.92 125 4.92 125 4.92 125 4.92 125 5.91 150 5.91 150 6.89 175 6.89 175 7.87 200 7.87 200 Width 2.36 60 2.36 60 3.15 80 3.15 80 3.94 100 3.94 100 3.94 100 3.94 100 4.92 125 4.92 125 5.91 150 5.91 150 Enclosure Depth Lid (With Lid) Recess Size 1.18 2.13 x 2.05 30 54 x 52 1.57 2.13 x 2.05 40 54 x 52 1.38 3.78 x 2.76 35 96 x 70 1.97 3.78 x 2.76 50 96 x 70 2.36 3.78 x 3.46 60 96 x 88 3.54 3.78 x 3.46 90 96 x 88 2.36 4.72 x 3.54 60 120 x 90 3.54 4.72 x 3.54 90 120 x 90 2.76 5.59 x 4.53 70 142 x 115 3.94 5.59 x 4.53 100 142 x 115 2.76 6.50 x 5.31 70 165 x 135 3.94 6.50 x 5.31 100 165 x 135 P.C.B. Wall Mount Bottom Mounting Dimensions Recess Size Dimensions (Flanged Lid) 2.13 x 2.05 2.52 x 1.18 3.62 54 x 52 64 x 30 92 2.13 x 2.05 2.52 x 1.18 3.62 54 x 52 64 x 30 92 3.78 x 2.76 4.21 x 1.57 5.39 96 x 70 107 x 40 137 3.78 x 2.76 4.21 x 1.57 5.39 96 x 70 107 x 40 137 3.78 x 3.46 4.17 x 2.56 5.39 96 x 88 106 x 65 137 3.78 x 3.46 4.17 x 2.56 5.39 96 x 88 106 x 65 137 4.72 x 3.54 5.20 x 2.36 6.38 120 x 90 132 x 60 162 4.72 x 3.54 5.20 x 2.36 6.38 120 x 90 132 x 60 162 5.59 x 4.53 6.06 x 2.76 7.36 140 x 112 154 x 70 187 5.59 x 4.41 6.06 x 2.76 7.36 140 x 112 154 x 70 187 6.50 x 5.31 7.01 x 3.94 6.5 165 x 135 178 x 100 216 6.50 x 5.31 7.01 x 3.94 6.5 165 x 135 178 x 100 216 Technical references and CAD downloads available at www.hammondmfg.com 4 www.hammondmfg.com Hand-Held ABS Plastic (RL Series) Key Features: • Designed to house P.C. boards - for hand-held use. • Molded in light grey - general purpose ABS plastic with a light texture (material carries a UL flammability rating of UL94 HB). • Two part - snap action - clam shell construction. Both halves include smooth recessed area for membrane, label or silkscreen. • P.C. board standoffs are molded into both halves of the enclosure. Four short M3 screws included. • P.C. board guides molded into top half. • Designed to meet IP54. • Includes four - M3 assembly screws. Part Number Color RL6015 Grey RL6035 Grey RL6055 Grey RL6065 Grey Units inch mm inch mm inch mm inch mm Length 4.09 104 5.67 144 7.01 178 8.07 205 Width 2.56 65 2.56 65 4.13 105 4.13 105 Enclosure Depth (With Lid) 1.57 40 1.57 40 1.57 40 1.57 40 Technical references and CAD downloads available at www.hammondmfg.com 5 www.hammondmfg.com ABS Plastic - Hand-Held (RH Series) Key Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user’s hand. • Lap joint construction provides protection against dust accumulation and splashing water. • Removeable front panel for easy modifications. • Molded in a light grey general purpose ABS plastic with a light texture (material carries a UL flammability rating of UL94 HB). • Assembled with M3 Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required (except for the two smallest sizes). The RH3115 and the RH3135 use self tapping M2.6 screws. • Both top and bottom halves contain P.C. board standoffs molded in. • The two largest sizes (RH3185 & RH3195) include four self adhesive rubber feet for desk top use. Standard Part Number RH3115 RH3135 RH3155 RH3165 RH3185 RH3195 Units inch mm inch mm inch mm inch mm inch mm inch mm Length 3.94 100 4.72 120 6.5 165 6.5 165 7.28 185 7.48 190 Width 2.36 60 2.76 70 3.15 80 3.94 100 5.31 135 3.94 100 Enclosure Depth (assembled) 0.98 25 0.98 25 1.26 32 1.26 32 1.57 40 1.57 40 With Battery Door Part Number Part Number with Gaskets Color RH3015 RH3005* Grey RH3055 RH3045* Grey Units inch mm inch mm Length 5.12 130 6.50 165 Width 2.68 68 3.35 85 Enclosure Depth (assembled) 0.98 25 1.18 30 * Designed to meet IP 65 Technical references and CAD downloads available at www.hammondmfg.com 6 www.hammondmfg.com Watertight ABS Plastic (RP Series) Key Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • Material - General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). • Color is a light gray with a light texture. Also available with a clear polycarbonate lid (see table below). • Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water. • Rubber gasket is included and must be field installed. • Lid includes smooth recessed area for membrane, label or silkscreen (see chart below for recess size). • Designed to meet IP 65. • Lid is secured with self captivating - M3.5 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly). All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). • Internal features are maximized for mounting options: ○ Internal DIN rail mounting tabs - molded in. ○ Options vary with size. Part No. Part No. ABS with Clear Lid RP1025 RP1025C RP1065 RP1065C RP1085 RP1085C RP1095 RP1095C RP1135 RP1135C RP1205 RP1205C Units inch mm inch mm inch mm inch mm inch mm inch mm Length 2.56 65 3.35 85 4.13 105 4.13 105 4.92 125 5.71 145 Height (Includes Width Lid) 2.36 1.57 60 40 3.15 2.17 80 55 2.95 1.57 75 40 2.95 2.17 75 55 3.35 2.17 85 55 4.13 1.77 105 45 Lid Recess Size 1.54 x 2.05 39 x 52 2.32 x 2.83 59 x 72 2.56 x 3.07 65 x 78 2.56 x 3.07 65 x 78 3.03 x 3.90 77 x 99 4.57 x 3.78 116 x 96 Part No. Part No. ABS with Clear Lid RP1215 RP1215C RP1175 RP1175C RP1245 RP1245C RP1285 RP1285C RP1455 RP1455C RP1465 RP1465C Units inch mm inch mm inch mm inch mm inch mm inch mm Length 5.71 145 6.5 165 6.5 165 7.32 186 8.66 220 8.66 220 Height (Includes Width Lid) 4.13 2.56 105 65 3.35 2.17 85 55 4.92 2.95 125 75 5.75 2.95 146 75 6.5 2.36 165 60 6.5 3.35 165 85 Lid Recess Size 4.57 x 3.78 116 x 96 2.76 x 5.47 70 x 139 5.43 x 4.57 138 x 116 5.08 x 5.91 129 x 150 7.28 x 5.91 185 x 150 7.28 x 5.91 185 x 150 Technical references and CAD downloads available at www.hammondmfg.com 7 www.hammondmfg.com Sealed - ABS Plastic (RS Series) Key Features: • Designed to house P.C. boards - sealed from dust and water (not for outdoor use). • Molded in light grey - general purpose ABS plastic with a light texture (material carries a UL flammability rating of UL94 HB). • Two part - styled lid construction. Top half includes smooth recessed area for membrane, label or silkscreen. • P.C. board standoffs are molded into the bottom (two smallest sizes) and molded into both halves of the enclosure (two largest sizes). Four short M3 self tapping screws included. • Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water. • Designed to meet IP65. • Includes four - M4 assembly screws (see table below for type). • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). Part Number Color RS5105S Grey RS5305S Grey RS5705 Grey RS5805 Grey Assembly Method Four - Self Tapping Stainless Steel Screws Four - Self Tapping Stainless Steel Screws Four - Stainless Steel Machine Screws (into Stainless Steel Inserts) Four - Stainless Steel Machine Screws (into Stainless Steel Inserts) Lid Gasket Installed Installed Kit (Included) Kit (Included) Units inch mm inch mm inch mm inch mm Technical references and CAD downloads available at www.hammondmfg.com 8 Length 4.13 105 6.5 165 9.84 250 9.84 250 Width 4.13 105 4.13 105 7.87 200 7.87 200 Enclosure Depth (With Lid) 2.17 55 3.07 78 3.54 90 5.12 130 www.hammondmfg.com Watertight Polycarbonate (RP Series) Key Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • Material - Polycarbonate (material carries a UL flammability rating of UL94 HB). • Color is an off white with a light texture. • Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water. • Rubber gasket is included and must be field installed. • Lid includes smooth recessed area for membrane, label or silkscreen (see chart below for recess size). • Designed to meet IP 65. • Lid is secured with self captivating - M3.5 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly). All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). • Internal features are maximized for mounting options: ○ Internal DIN rail mounting tabs - molded in. ○ Options vary with size. Part No. RP1020 RP1060 RP1080 RP1090 RP1130 RP1200 RP1210 RP1170 RP1240 RP1280 RP1450 RP1460 Units inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm Length 2.56 65 3.35 85 4.13 105 4.13 105 4.92 125 5.71 145 5.71 145 6.5 165 6.5 165 7.32 186 8.66 220 8.66 220 Width 2.36 60 3.15 80 2.95 75 2.95 75 3.35 85 4.13 105 4.13 105 3.35 85 4.92 125 5.75 146 6.5 165 6.5 165 Height (Includes Lid) 1.57 40 2.17 55 1.57 40 2.17 55 2.17 55 1.77 45 2.56 65 2.17 55 2.95 75 2.95 75 2.36 60 3.35 85 Lid Recess Size 1.54 x 2.05 39 x 52 2.32 x 2.83 59 x 72 2.56 x 3.07 65 x 78 2.56 x 3.07 65 x 78 3.03 x 3.90 77 x 99 4.57 x 3.78 116 x 96 4.57 x 3.78 116 x 96 2.76 x 5.47 70 x 139 5.43 x 4.57 138 x 116 5.08 x 5.91 129 x 150 7.28 x 5.91 185 x 150 7.28 x 5.91 185 x 150 Technical references and CAD downloads available at www.hammondmfg.com 9 www.hammondmfg.com Watertight - Deep Lid (RP Series) Key Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components requiring a deep enclosure. • Choice of two materials - General purpose ABS plastic or Polycarbonate (both materials carry a UL flammability rating of UL94 HB). • ABS Plastic color is a light gray with a light texture. Also available with a clear polycarbonate lid (see table below). • Polycarbonate version is available in an off white with a light texture. • Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water. • Rubber gasket is included and must be field installed. • Lid includes smooth recessed area for membrane, label or silkscreen (see chart below for recess size). • Designed to meet IP 65. • Lid is secured with self captivating - M3.5 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly). All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). • Internal features are maximized for mounting options: ○ Internal DIN rail mounting tabs - molded in. ○ Options vary with size. Part No. ABS Part No. Polycarb Part No. ABS with Clear Lid RP1155 RP1150 RP1155C RP1185 RP1180 RP1185C RP1385 RP1380 RP1385C Units inch mm inch mm inch mm Length 4.92 125 6.5 165 7.32 186 Width 3.35 85 3.35 85 5.75 146 Height (Includes Lid) 3.35 85 3.35 85 4.33 110 Technical references and CAD downloads available at www.hammondmfg.com 10 Lid Recess Size 2.76 x 3.66 70 x 93 2.76 x 5.28 70 x 134 4.92 x 5.79 125 x 147 www.hammondmfg.com Hammond on the Web For detailed drawings, CAD files and color photos visit Hammond’s website at: www.hammondmfg.com 2 1 Top View of Assembly 69.68 [2.743] (Center Inlay Width) A SECTION A-A (Side View Inside Assembly) (P.C. Board) Detail View of PCB Boss (Located on Top and Bottom Cover) 4.50 [.177] n6.00 [.236] (Top and Bottom Assem Bossn) 130.68 [5.145] (Inlay Length) 147.24 [5.797] B B n5.00 [.197] Bottom Cover A 19.50 [.768] (Inner Box Height) 58.89 [2.319] (End Inlay Width) 89.00 [3.504] SECTION B-B (Inside of Bottom Cover) End View of Assembly B Bottom Cover 80.98 [3.188] (Inner Box Width at Center) Front Panel .50 [.020] (Inlay Depth) 3.66 [.144] (PCB dist from inner wall) 68.93 [2.714] 59.95 (Inner Box Width at End) [2.360] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] .46 [.018] (Pcb dist from inner wall) B 25.00 [.984] P.C Board Aligned on PCB Bosses 140.24 [5.521] (Inner Box Length) Maximum P.C. Board Size ( Not to scale ) Front/Rear Panel (Dashed Line Indicates Viewing Area) A 5.46 [.215] 41.63 [1.639] 65.55 [2.581] (Viewing Area) 17.80 [.701] 14.57 [.573] (Viewing Area) 77.83 [3.064] 10.28 [.405] 3.20 [ .126] X 8 22.03 [.867] 73.67 [2.900] 69.01 [2.717] 67.32 [2.650] 46.04 [1.812] 8.36 [.329] R3.42 [R.135] 139.11 [5.477] A 67.83 62.75 [2.670] [2.470] P.C. Board (Not Supplied) 2.50 [.098] 30.14 [1.187] 45.89 [1.807] 40.00 [1.575] 2 1553D R4.33 [R.170] 1 Additional Hammond Literature Catalog 9C-05 Catalog 9C-05SUP Brochure RM-1457 Electronic Enclosures Electronic Enclosures Supplement RM Series 1457 Series Contact one of our offices on the back to order one today! Factory Modified Enclosures • • • • • Machining Silk Screening Hot Stamping Special Colors Custom Materials Easy to quote and order • Mark up our PDF drawings downloadable from our website • Modify our AutoCad files downloadable from our website • Email us at [email protected] Technical references and CAD downloads available at www.hammondmfg.com 11 CANADA Hammond Mfg. Co. Ltd. 394 Edinburgh Road North Guelph, Ontario N1H 1E5 Tel: (519) 822-2960 or (905) 456-3770 Fax: (519) 822-0715 USA Hammond Mfg. Co. Inc. 475 Cayuga Road Cheektowaga, NY 14225 Tel: (716) 630-7030 Fax: (716) 630-7042 Les Fabrications Hammond (Quebec) Inc. 4240 Seré Street St. Laurent, Quebec H4T 1A6 Tel: (514) 343-9010 Fax: (514) 343-9941 Asia RITEC Enclosures Inc. 10F., No. 81, Sec. 1, Kuang Fu Road San Chung City, Taipei 241 Taiwan Tel: +886 - 2 - 2999 8918 Fax: +886 - 2 - 2999 8955 Europe Hammond Electronics Limited 1 Onslow Close Kingsland Business Part Basingstoke, Hampshire RG24 8QL United Kingdom Tel: 01256 812812 Fax: 01256 332249 Australia Hammond Electronics Pty. Ltd. ABN 13 099 121 981 11-13 Port Road Queenstown, SA 5014 Australia Tel: 61-8-8240-2244 Fax: 61-8-8240-2255 www.hammondmfg.com