DSCC DWG #8508901YA DSCC DWG #8508902YA FLH0101AK/883 FLH0101K/883 FLH0101AK/883 FLH0101K/883 5 Amp Linear Wide Band Power Operational Amplifier In A Hermetic 8-Lead TO-3 Package Product Data Sheet 5 AMP LINEAR WIDE BAND POWER OPERATIONAL AMPLIFIER IN A HERMETIC 8-LEAD TO-3 PACKAGE PIN CONNECTION Top View 2 3 DESCRIPTION: 1 4 5 Film Microelectronics has developed this Power Operational Amplifier for use in servo amplifiers, power supplies and actuators. Small size and high reliability make these devices suitable for use in industrial, aerospace, and military applications. FEATURES: • 5 A Peak Output Current • 10V/µs Slew Rate • Very Fast Settling Time - 2µs to 0.01% • Low Input Offset Voltage • Ultra Low Crossover Distortion • Thermally Efficient TO-3 Package • Available as DSCC SMD 8508901/02YA • Additional Screening Available 6 7 8 Pin Connection Pin 1: Pin 2: Pin 3: Pin 4: Pin 5: Pin 6: Pin 7: Pin 8: Case: ISC+ V+ Feedback N/C -Input +Input VISCOutput W TJ Operating Junction Temperature TSTG Storage Temperature Lead Temperature (10 sec) -55 to +150 -65 to +150 300 °C °C °C TO AN M RECOMMENDED OPERATING CONDITIONS Parameter TA Ambient Operating Temperature Range Range -55 to +125 M OXIDE US LLIU BeOE FRE UCT 62 (derate linearly @ 2°C/W to 0 @ 150°C) ROD Units V V V A °C/W ED Rating ±22 ±20, but < ±VS ±40, but < ±VS 5 2 SP Parameter VS Supply Voltage VCM Input Voltage Range VIN Differential Input Voltage IO(PK) Peak Output Current (50 ms pulse) θJC Thermal Resistance Junction To Case PD Power Dissipation NO BE RY ABSOLUTE MAXIMUM RATINGS @ TC = 25°C, unless otherwise stated U FA C T U R E T H I Units °C e-mail: [email protected] Website: www.filmmicroelectronics.com 0700 Film Microelectronics Incorporated • 530 Turnpike Street, North Andover, MA 01845 • Tel: 978.975.3385 • Fax: 978.975.3506 DSCC DWG #8508901YA DSCC DWG #8508902YA FLH0101AK/883 FLH0101K/883 FLH0101AK/883 FLH0101K/883 5 Amp Linear Wide Band Power Operational Amplifier In A Hermetic 8-Lead TO-3 Package Product Data Sheet = 25°C, unless otherwise stated CMRR Common Mode Rejection Ratio PSRR Power Supply Rejection Ratio IS SR GBW Supply Current Slew Rate (Device Type FLH0101AK) Gain-Product Bandwidth (Device Type FLH0101AK) Min. 50 ±11.7 ±11 85 85 80 80 7.5 4 Max. 3 7 10 15 300 300 1000 1000 75 75 250 250 - Units mV mV pA nA pA nA pA nA pA nA V/mV V dB dB 35 - Test Conditions TA = +25°C TA = -55°C to +125°C TA = +25°C TA = -55°C to +125°C TA = +25°C TA = -55°C to +125°C TA = +25°C TA = -55°C to +125°C TA = +25°C TA = -55°C to +125°C TA = +25°C TA = -55°C to +125°C VO = ±10V, RL = 10Ω RSC = 0Ω, AV = 1, RL = 100Ω RSC = 0Ω, AV = 1, RL = 10Ω VIN = ±10V ±5V ≤ VS ≤ ±15V +5V ≤ VS(+) ≤ +15V, VS (-) = -15V -5V ≥ VS(-) ≥ -15V, VS(+) = +15V mA V/µs RL = 10Ω, AV = 1 MHz RL = ∞, AV = 1 NO B ER .176" Radius .166" 80° 1.020" 0.980" AN M .599" .589" TO .505" Pin .495" Circle 1.549" 1.509" .925" DIA .900" .775" .760" DIA 40° 1.197" 1.177" .280" .220" FREE U FA CTURE TH IS .395" .345" 40° .159" DIA .153" BeO ED IUM OXIDE US YLL MECHANICAL OUTLINE ODUCT Parameter Input Offset Voltage VIO (Device Type FLH0101AK) VIO Input Offset Voltage (Device Type FLH0101K) IIB Input Bias Current (Device Type FLH0101AK) IIB Input Bias Current (Device Type FLH0101K) IIO Input Offset Current (Device Type FLH0101AK) IIO Input Offset Current (Device Type FLH0101K) AVOL Large Signal Voltage Gain VO Output Voltage Swing PR Electrical Characteristics @ TA .105" .085" .044" DIA TYP .036" 8 LEADS Film Microelectronics Incorporated • 530 Turnpike Street, North Andover, MA 01845 • Tel: 978.975.3385 • Fax: 978.975.3506