ETC FM117AHVH/883

DSCC SMD #7703407XA
FM117AHVH/883
FM117AHVH/883
0.5 Amp,
Adjustable, Positive High Voltage
Regulator In A Hermetic TO-39 Package
Product Data Sheet
0.5 AMP, ADJUSTABLE, POSITIVE HIGH
VOLTAGE REGULATOR IN A HERMETIC
TO-39 PACKAGE
Mechanical Outline
Bottom View
DESCRIPTION:
1
2
Film Microelectronics has developed these three terminal adjustable regulators
for use in any application where hermeticity, thermal efficiency and small size
are important. All devices have the following features.
3
Pin Connections
Pin 1: Input
Pin 2: Adjustment
Pin 3: Output (case)
FEATURES:
• Overcurrent Protection - Standard
• Safe Operating Area Protection - Standard
• Short Circuit Current Limiting - Standard
• Thermal Shutdown - Standard
• Additional Screening Available
• Surface Mount or Through-Hole Lead Forming Available
• Tinned Leads Available
ABSOLUTE MAXIMUM RATINGS @ TC = 25°C, unless otherwise stated
Parameter
PD
Power Dissipation
VDIFF
Input-Output Voltage Differential
θJC
Thermal Resistance Junction to Case
IMAX
Output Current
TJ
Operating Junction Temperature
TSTG
Storage Temperature
Lead Temperature (10 sec)
Rating
2
60
15
0.5
-55 to +150
-65 to +150
300
Units
W
Vdc
°C/ W
A
°C
°C
°C
RECOMMENDED OPERATING CONDITIONS
Parameter
VOUT Output Voltage Range
VIN
Input Voltage Range
TA
Ambient Operating Temperature Range
Range
1.2 to 57
4.25 to 61.25
-55 to +125
Units
Vdc
Vdc
°C
e-mail: [email protected]
Website: www.filmmicroelectronics.com
0800A
Film Microelectronics Incorporated • 530 Turnpike Street, North Andover, MA 01845 • Tel: 978.975.3385 • Fax: 978.975.3506
DSCC SMD #7703407XA
FM117AHVH/883
FM117AHVH/883
0.5 Amp,
Adjustable, Positive High Voltage
Regulator In A Hermetic TO39 Package
Product Data Sheet
ELECTRICAL CHARACTERISTICS @ TA
Parameter
VREF
Reference Voltage
RLINE
Min.
1.238
1.225
1.225
1.225
-
Line Regulation
RLOAD
Load Regulation
-
VRTH
RN
Thermal Regulation
Ripple Rejection
IADJ
Adjustment Pin Current
∆IADJ
ILMIN
ICL
66
-
Adjustment Pin Current
Change
-
Minimum Load Current
Current Limit
0.50
0.15
0.02
= 25°C, IL = 8mA, unless otherwise stated
Max.
1.262
1.270
1.270
1.270
±4.5
±9.0
±2.5
±4.0
±15
±15
±15
±15
±15
±2.0
-
Units
V
mV
mV
mV
dB
100
100
100
100
±5
±5
±5
±5
±5
±5
±5
5
5
5
7
1.65
0.65
0.28
µA
µA
mA
A
Test Conditions
VDIFF = 3.0V
VDIFF = 3.3V, TA = -55°C to +125°C
VDIFF = 40V, TA = -55°C to +125°C
VDIFF = 60V, TA = -55°C to +125°C
3.0V ≤ VDIFF ≤ 40V, VOUT = VREF
3.3V ≤ VDIFF ≤ 40V, TA = -55°C to +125°C
40V ≤ VDIFF ≤ 60V, VOUT = VREF
40V ≤ VDIFF ≤ 60V, TA = -55°C to +125°C
VDIFF = 3.0V, 10mA ≤ IL ≤ 0.5A
VDIFF = 3.3V, 10mA ≤ IL ≤ 0.5A, TA = -55°C to +125°C
VDIFF = 40V, 10mA ≤ IL ≤ 150mA
VDIFF = 40V, 10mA ≤ IL ≤ 100mA, TA = -55°C to +125°C
VDIFF = 60V, 10mA ≤ IL ≤ 20mA, TA = -55°C to +125°C
VIN = +14.6V, IL =0.5A, PD = 20W, t = 20mS
f = 120Hz, VOUT = VREF, CADJ = 10µF, IO = 100mA,
TA = -55°C to +125°C
VDIFF = 3.0V
VDIFF = 3.3V, TA = -55°C to +125°C
VDIFF = 40V, TA = -55°C to +125°C
VDIFF = 60V, TA = -55°C to +125°C
VDIFF = 3.0V, 10mA ≤ IL ≤ 0.5A
VDIFF = 3.3V, 10mA ≤ IL ≤ 0.5A, TA = -55°C to +125°C
VDIFF = 40V, 10mA ≤ IL ≤ 150mA
VDIFF = 40V, 10mA ≤ IL ≤ 100mA, TA = -55°C to +125°C
3.0V ≤ VDIFF ≤ 40V, VOUT = VREF
3.3V ≤ VDIFF ≤ 40V, TA = -55°C to +125°C
3.3V ≤ VDIFF ≤ 60V, TA = -55°C to +125°C
VDIFF = 3V, VOUT = -1.4V (forced)
VDIFF = 3.3V, VOUT = -1.4V (forced), TA = -55°C to +125°C
VDIFF = 40V, VOUT = -1.4V (forced), TA = -55°C to +125°C
VDIFF = 60V, VOUT = -1.4V (forced), TA = -55°C to +125°C
VDIFF = 15V, TA = -55°C to +125°C
VDIFF = 40V
VDIFF = 60V
Mechanical Outline
.370"
.335"
.335"
.305"
.040"
Reference
Plane
Base and
Seating Plane
.045"
.010"
Gauge
Plane
.185"
.165"
.034"
.027"
45°
.750"
.500"
.045"
.027"
.200"
.019"
.016"
Film Microelectronics Incorporated • 530 Turnpike Street, North Andover, MA 01845 • Tel: 978.975.3385 • Fax: 978.975.3506