PI74LCX244 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Fast CMOS 3.3V 8-Bit Buffer/Line Driver Product Features Product Description • Functionally compatible with FCT3, LVT, and 74 series 244 families of products • Tri-State outputs • 5V Tolerant inputs and outputs • 2.0V-3.6V VCC supply operation • Balanced sink and source output drives (24 mA) • Low ground bounce outputs • Power Down High Impedance inputs and outputs • Supports live insertion • ESD Protection exceeds 2000V, Human Body Model 200V, Machine Model • Packages available: – 20-pin 209-mil wide plastic SSOP (H) – 20-pin 173-mil wide plastic TSSOP (L) – 20-pin 150-mil wide plastic QSOP (Q) – 20-pin 300-mil wide plastic SOIC (S) Pericom Semiconductor’s PI74LCX series of logic circuits are produced using the Company’s advanced 0.6 micron CMOS technology achieving high speed while maintaining low power operation. The PI74LCX244 is an 8-bit non-inverting buffer/line driver designed for driving high capacitive memory loads. With its balanced-drive characteristics, this high-speed, low power device provides lower ground bounce, transmission line matching of signals, fewer line reflections and lower EMI and RFI effects. This makes it ideal for driving on-board buses and transmission lines. Logic Block Diagram Product Pin Configuration The PI74LCX244 can be driven from either 3.3V or 5.0V devices allowing this device to be used as a translator in a mixed 3.3V/5.0V system. OEA DA0 OB0 DA1 OB1 DA2 OB2 DA3 OB3 GND OEA OEB DA0 OA0 OB0 DB0 DA1 OA1 OB1 DB1 DA2 OA2 OB2 DB2 DA3 OA3 OB3 DB3 Outputs OEA OEB DXX OXX L L L L L L H H H H X Z VCC OEB OA0 DB0 OA1 DB1 OA2 DB2 OA3 DB3 Product Pin Description Truth Table(1) Inputs 1 20 2 19 3 20-Pin 18 4 17 H20 L20 5 16 Q20 6 15 S20 7 14 8 13 9 12 10 11 Pin Name Description OEA, OEB 3-State Output Enable Inputs (Active LOW) DXX Inputs Note: 1. H = High Voltage Level, OXX X = Don’t Care, GND L = Low Voltage Level, VCC Z = High Impedance 1 Outputs Ground Power PS2098B 11/17/02 PI74LCX244 3.3V 8-Bit Buffer/Line Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Storage Temperature ............................................................. –65°C to +150°C Ambient Temperature with Power Applied ............................ –40°C to +85°C Supply Voltage to Ground Potential (Inputs & Vcc Only) ...... –0.5V to +7.0V Supply Voltage to Ground Potential (Outputs & D/O Only) .. –0.5V to +7.0V DC Input Voltage .................................................................... –0.5V to +7.0V DC Output Current .............................................................................. 120 mA Power Dissipation .................................................................................... 1.0W Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Recommended Operating Conditions Symbol VCC Parameter Supply Voltage VI Input Voltage VO Output Voltage IOH/IOL TA ∆t/∆V Output Current Min. Max. Operating 2.0 3.6 Data Retention 1.5 3.6 0 5.5 HIGH or LOW State 0 VCC TRI-State 0 5.5 VCC = 3.0V-3.6V ±24 VCC = 2.7V ±12 −40 +85 °C 0 10 ns/V Free-Air Operating Temperature Input Edge Rate V = 0.8V-2.0V, VCC = 3.0V 2 Units V mA PS2098B 11/17/02 PI74LCX244 3.3V 8-Bit Buffer/Line Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 DC Electrical Characteristics (Over the Operating Range, TA = −40°C to +85°C, VCC = 2.7V to 3.6V) Parameters Description Test Conditions(1) VIH Input HIGH Voltage VIL VOH VOL Min. Typ(2) Max. Guaranteed Logic HIGH Level 2.0 — — Input LOW Voltage Guaranteed Logic LOW Level — — 0.8 Output HIGH Voltage VCC = 2.7-3.6 IOH = –0.1 mA VCC-0.2 — — VCC = 2.7 IOH = –12 mA 2.2 — — VCC = 3.0 IOH = –18 mA 2.4 — — IOH = –24 mA 2.2 — — VCC = 2.7-3.6 IOL = 0.1 mA — — 0.2 VCC = 2.7 IOL = 12mA — — 0.4 VCC = 3.0 IOL = 16 mA — — 0.4 IOL = 24 mA — — 0.55 Output LOW Voltage VIK Clamp Diode Voltage VCC = Min., IIN = –18 mA — −0.7 −1.2 II Input Leakage Current 0 ≤ VI ≤ 5.5V Vcc = 2.7-3.6 — — ±5 IOZ Tri-State Output Leakage 0 ≤ VO ≤ 5.5V VI = VIH or VIL VCC = 2.7-3.6 — — ±5 IOFF Power Down Disable VCC = 0V, VIN or VOUT ≤ 5.5V — — 10 ICC Quiescent Power Supply Current VCC = Max. VIN = GND or VCC 0.1 10 ∆ICC Quiescent Power Supply Current TTL Inputs HIGH VCC = Max. VIN = VCC – 0.6V(3) 500 Units V µA Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V, +25°C ambient. 3. Per TTL driven input; all other inputs at Vcc or GND. Capacitance Parameters Description CIN Test Conditions Typ. Input Capacitance VCC = Open, VI = 0V or VCC 7 COUT Output Capacitance VCC = 3.3V, VI = 0V or VCC 8 CPD Power Dissipation Capacitance VCC = 3.3V, VI = 0V or VCC, F = 10 MHz 25 3 PS2098B Units pF 11/17/02 PI74LCX244 3.3V 8-Bit Buffer/Line Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Switching Characteristics over Operating Range VCC = 3.3V ± 0.3V Parameters VCC = 2.7V Description Conditions Min. Max. Min. Max. tPLH tPHL Propagation Delay DXX to OXX CL = 50 pF RL = 500Ω 1.5 6.5 1.5 7.5 tPZH tPZL Output Enable time 1.5 8.0 1.5 9.0 tPHZ tPLZ Output Disable Time 1.5 7.0 1.5 8.0 Output Skew(1) 1.0 tSK(O) Units ns Note: 1. Skew between any two outputs, of the same package, switching in the same direction. Dynamic Switching Characteristics (TA = +25°C) Parameters Description Test Conditions(1) VOLP Dynamic LOW Peak Voltage VCC = 3.3V, CL = 50 pF VIH = 3.3V, VIL = 0V VOLV Dynamic LOW Valley Voltage VCC = 3.3V, CL = 50 pF VIH = 3.3V, VIL = 0V Typ. Units 0.8 V Note: 1. Measured with n–1 outputs switching from High-to-Low or Low-to-High. The remaining output is measured in the LOW state. 4 PS2098B 11/17/02 PI74LCX244 3.3V 8-Bit Buffer/Line Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Packaging Mechanical: 20-pin SSOP (H-package) 20 .197 .220 5.00 5.60 1 .004 .009 .272 .295 6.90 7.50 0.55 .022 0.95 .037 .078 2.00 Max SEATING PLANE .291 .322 7.40 8.20 .002 Min 0.050 .0098 Max. 0.25 .0256 BSC 0.65 0.09 0.25 X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS Packaging Mechanical: 20-pin TSSOP (L-package) 20 .169 .177 4.3 4.5 1 .252 .260 6.4 6.6 .0256 BSC 0.65 .004 0.09 .008 0.20 .047 1.20 Max .007 .012 0.19 0.30 0.45 0.75 SEATING PLANE .018 .030 .238 .269 6.1 6.7 .002 0.05 .006 0.15 X.XX X.XX 5 DENOTES CONTROLLING DIMENSIONS IN MILLIMETERS PS2098B 11/17/02 PI74LCX244 3.3V 8-Bit Buffer/Line Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Packaging Mechanical: 20-pin QSOP (Q-package) 20 .008 0.20 MIN. .150 .157 .008 .013 0.20 0.33 3.81 3.99 Guage Plane .010 0.254 1 Detail A .337 8.56 .344 8.74 0˚-6˚ .016 .035 0.41 0.89 .041 1.04 REF .058 REF 1.47 .015 x 45˚ 0.38 .053 1.35 .069 1.75 Detail A .007 .010 SEATING PLANE .016 .050 .025 BSC 0.635 .004 0.101 .010 0.254 0.178 0.254 0.41 1.27 .228 .244 5.79 6.19 .008 0.203 .012 0.305 X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS Packaging Mechanical : 20-pin SOIC (S-package) 20 7.40 7.60 .2914 .2992 .010 .029 0.254 x 45˚ 0.737 1 .496 12.60 .511 12.99 .020 0.508 REF .030 0.762 .013 .020 0.33 0.51 0.23 0.32 0.41 .016 1.27 .050 .0926 .1043 2.35 2.65 SEATING PLANE .050 BSC 1.27 .0091 .0125 0-8˚ .0040 .0118 .394 .419 10.00 10.65 0.10 0.30 X.XX DENOTES CONTROLLING X.XX DIMENSIONS IN MILLIMETERS Ordering Information Orde ring Code De s cription PI74LCX244H 20- Pin 209- mil wide Plastic SSOP (H) PI74LCX244L 20- Pin 173- mil wide Plastic TSSOP (L) PI74LCX244Q 20- Pin 150- mil wide Plastic QSOP(Q) PI74LCX244S 20- Pin 300- mil wide Plastic SSOP(S) Pericom Semiconductor Corporation 2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax (408) 435-1100 • http://www.pericom.com 6 PS2098B 11/17/02