5 x 20mm Glass Tube Type 5MF / 5MFP Fast Blow Fuse Series 5MFD0903 Catalog Number Electrical Characteristics Testing current (UL/CSA STD. 248-14) Blow Time Ampere Rating Typical Volt-drop Melting I2T Melting I2T Cold @100% In < 10 mSec @10 In Resistance (ohm) (Volt) max. (A2 Sec) (A2 Sec) Maximum Power Dissipation (W) 5MF (P) 80 80mA 10.2 3.05 0.0004 0.0004 0.32 5MF (P) 100 100mA 7.2 2.65 0.0009 0.0008 0.35 5MF (P) 125 125mA 6.8 3.64 0.0017 0.0015 0.60 5MF (P) 200 200mA 3.4 2.76 0.007 0.006 0.72 Minimum Maximum 5MF (P) 250 250mA 2.4 2.40 0.014 0.013 0.79 100% 4 Hrs. N/A 5MF (P) 300 300mA 1.7 2.09 0.028 0.027 0.84 135% N/A 1 Hr 5MF (P) 500 500mA 0.84 1.58 0.116 0.113 1.04 200% N/A 5 Sec 5MF (P) 700 700mA 0.18 0.22 0.390 0.370 0.20 1A 0.12 0.20 0.88 0.85 0.26 5MF (P) 1.25 1.25A 0.09 0.19 1.50 1.48 0.31 5MF (P) 1.5 1.5A 0.07 0.18 2.58 2.58 0.36 Vßpc Approvals Safety Agency Approvals V Listed File No. E20624 ß Certified File No. LR39772 pFJEilTe1N03o7. -J3E1T010033-71-03013003-1001, Type Amp range / volt @ I.R. ability 5MF / 5MFP 80mA. - 3A / 250V AC@ 200A 5MF (P) 2 2A 0.05 0.17 4.4 4.5 0.44 2.5A 0.04 0.16 7.6 7.8 0.52 3A 0.03 0.15 13 14 0.59 3.5A 0.026 0.14 17 18 0.66 5MF (P) 4 4A 0.022 0.14 22 24 0.73 5MF (P) 5 5A 0.017 0.13 38 41 0.86 5MF (P) 6 6A 0.013 0.12 66 72 0.98 5MF (P) 7 7A 0.011 0.12 86 95 1.10 5MF (P) 8 8A 0.010 0.12 113 126 1.22 5MF (P) 2.5 5MF (P) 3 80mA - 8A / 125V AC@ 10,000A 5MF / 5MFP 1A. - 5A / 125V AC@ 500A 5MF >5A. - 15A / 125V AC@ 300A File No. JET1037-31003-1002 5MF (P) 1 Operating Temperature -55ºC to +125ºC 5MF (P) 3.5 Consult manufacturer for other ratings Physical Specification Marking On fuse: “bel”, “5MF”, “Current Rating”, “Votage Rating", and “Appropriate Safety Logos” On label: Above info plus “c” and interrupting rating Voltage on fuse: 250V for 80mA to 3A; 125V for rating above 3A Packaging 1. In bulk: 5MF - 1,000 pcs per box; 5MFP - 500 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 63.5mm inside Tape Spacing Mechanical Dimensions 5MF 5MFP 1.5" ± 0.08" (38.1 ± 2mm) 0.787" ± 0.02" (20 ± 0.5mm) 0.20" ± 0.004" (5.1 ± 0.1mm) 0.827" ± 0.02" (21.0 ± 0.5mm) 0.217" ± 0.004" (5.5 ± 0.1mm) SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice Materials Glass body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.032”, 5A and less Diameter 0.040", 6A and above ORDERING INFORMATION SEE PAGES 67 & 68 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: www.belfuse.com 49 5 x 20mm Glass Tube Type 5MF / 5MFP Fast Blow Fuse Series 5MFC0801 - 80mA - 100mA - 125mA - 200mA - 250mA - 300mA - 500mA - 700mA - 1A - 1.25A - 1.5A - 2A - 2.5A - 3A - 3.5A - 4A - 5A - 6A - 7A - 8A 5MF / 5MFP - TIME CURRENT CHARACTERISTIC CURVE 10000 TIME IN SECONDS 1000 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 50