Type 3AG / 3AP Fast Blow Fuse Series 3AGD0199 Electrical Characteristics Testing current (UL/CSA STD. 248-14) Blow Time Minimum Maximum 100% 4 Hrs. N/A 135% N/A 1 Hr 200% N/A 5 sec Safety Agency Approvals Type Amp range / Volt @ I.R. ability V Listed File no. E20624 ß Certified File no. LR39772 3AG / 3AP t Anop.pr3o2v-a1l7F6il6e no. 32-1764 / 3AG / 3AP 1A. - 5A / 125V AC@ 500A 3AG >5A. - 15A / 125V AC@ 300A 100mA. - 10A / 250V AC@ 200A 100mA. - 15A / 125V AC@ 10,000A Operating Temperature -55ºC to +125ºC Physical Specification Materials Glass body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.032", 7A and less Diameter 0.040", 8A and above Ampere Rating 3AG (3AP) 100 100mA 12.5 4.5 0.002 0.002 0.59 3AG (3AP) 125 125mA 12.0 4.5 0.004 0.003 0.80 3AG (3AP) 160 160mA 8.3 4.2 0.008 0.006 0.94 3AG (3AP) 200 200mA 5.7 3.9 0.014 0.010 1.10 3AG (3AP) 250 250mA 3.9 3.6 0.025 0.019 1.29 3AG (3AP) 300 300mA 2.7 3.4 0.044 0.034 1.51 3AG (3AP) 375 375mA 2.0 3.2 0.07 0.06 1.64 3AG (3AP) 500 500mA 1.28 2.9 0.14 0.11 0.25 3AG (3AP) 750 750mA 0.24 0.2 0.75 0.74 0.30 1A 0.16 0.23 1.43 1.44 0.37 3AG (3AP) 1.25 1.25 A 0.114 0.21 2.45 2.51 0.44 3AG (3AP) 1.6 1.6 A 0.084 0.20 4.2 4.4 0.51 7.6 0.59 3AG (3AP) 2 3AG (3AP) 2.5 3AG (3AP) 3 3AG (3AP) 3.5 2A 0.063 0.18 2.5 A 0.047 0.17 12 7.2 13 0.70 3A 0.035 0.162 21 23 0.83 3.5 A 0.030 0.157 28 31 0.91 3AG (3AP) 4 4A 0.026 0.154 36 40 1.0 3AG (3AP) 5 5A 0.020 0.146 63 70 1.2 3AG (3AP) 6 6A 0.015 0.139 107 123 1.4 3AG (3AP) 7 7A 0.013 0.135 141 162 1.6 3AG (3AP) 8 8A 0.012 0.132 184 214 1.7 3AG (3AP) 10 10 A 0.009 0.125 316 372 2.0 3AG (3AP) 12 12 A 0.007 0.120 501 597 2.4 3AG (3AP) 15 15 A 0.006 0.114 845 1023 2.8 Consult manufacturer for other ratings Mechanical Dimensions 3AG Marking On fuse: “bel”, “3AG”, “Current Rating”, “Voltage Rating”, and "Appropriate Safety Logos" On label: Above info plus “c” and interrupting rating Voltage on fuse: 250V for 100mA to 10A; 125V for 12A and above Packaging 1. In bulk: 3AG - 1,000 pcs per box; 3AP - 500 pcs per box 2. On Axial Tape & Reel: 1,000 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 73mm inside Tape Spacing Typical Volt-drop Melting I2T Melting I2T Maximum Cold @100% In < 10 mSec @10 In Power Resistance Dissipation 2 2 (Volt) max. (A Sec) (A Sec) (W) (ohm) Catalog Number 3AG (3AP) 1 Vßtc Approvals File no. 32-1765 1/4 x 1 1/4 inch Glass Tube 3AP 1.25" ± 0.03" 0.250" ± 0.004" (31.8 ± 0.8mm) (6.35 ± 0.1mm) 1.5" ± 0.08" 1.28" ± 0.03" 0.270" ± 0.004" (38.1 ± 2mm) (32.5 ± 0.8mm) (6.9 ± 0.1mm) SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Internet: http://www. belfuse.com Type 3AG / 3AP 1/4 x 1 1/4 inch Glass Tube Fast Blow Fuse Series 3AGC0600 - 100mA - 125mA - 160mA - 200mA - 250mA - 300mA - 375mA - 500mA - 750mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3A - 3.5A - 4A - 5A - 6A - 7A - 8A - 10A - 12A - 15A 3AG / 3AP - TIME CURRENT CHARACTERISTIC CURVE 10000 1000 TIME IN SECONDS 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 FaxFax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Te l : 8 5 2 - 2 3 2 8 - 5 5 1 5 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. P r e s t o n Te c h n o l o g y M a n a g e m e n t C e n t r e Marsh Lane, Preston PR1 8U Lancashire, U.K Te l : 4 4 - 1 7 7 2 - 5 5 6 6 0 1 Fax: 44-1772-888366