Cascadable Thin Film Amplifier, 10 dB Gain 10 -2000 MHz AM-/AMC-180 V2.00 Features ● ● ● T0-8-1 +14 dBm Typical 1 dB Compression 5 dB Typical Noise Figure 1.4:1 Typical VSWR 0.150 TYP (3.8) DC IN RF OUT GND 0.220 MIN (5.6) RF IN Guaranteed Specifications* 0.300 TYP (7.8) 0.018 ± 0.005 DIA (0.46 ±0.13) 4 PINS 0.220 MAX (5.6) 0.450 (11.4) 0.50 DIA (12.7 ±0.5) Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.10 OUNCES 2.8 GRAMS C-32 Operating Characteristics MIL-STD-883 screening available. *All specifications apply when operated at +15 VDC. with 50 ohm source and load impedance. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 0.75 W must be provided in use. Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.) : 1.76 OUNCES 50 GRAMS Ordering Information Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 AM-/AMC-180 Cascadable Thin Film Amplifier V2.00 Typical Performance Typical S-Parameter Data VSWR GAIN (dB) AM-180 FREQUENCY 10.0 20.0 40.0 100.0 200.0 500.0 1000.0 1500.0 2000.0 S11 MAG ANG 0.20 -156.1 0.21 -169.7 0.22 -174.2 0.23 174.3 0.18 170.9 0.13 149.3 0.07 -140.6 0.18 -133.3 0.24 -168.2 S21 MAG ANG 2.97 -173.1 2.98 -177.4 3.01 179.0 3.02 171.6 3.01 162.0 3.05 134.3 3.12 86.4 3.05 32.4 3.01 -23.7 S12 MAG ANG 0.17 8.6 0.17 4.4 0.18 1.7 0.18 -1.4 0.18 -4.5 0.19 -14.1 0.20 -35.9 0.18 -59.6 0.17 -76.2 S22 MAG ANG 0.24 166.9 0.23 170.3 0.22 171.1 0.21 166.1 0.20 154.5 0.18 113.3 0.17 5.5 0.20 -93.3 0.26 -147.3 OUTPUT POWER (dBm) INTERCEPT(dBm) NOISE FIGURE (dB) Frequency in MHz FREQUENCY MHz Specifications Subject to Change Without Notice. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020