Cascadable Thin Film Amplifier, 28 dB Gain 5 - 1000 MHz AM-/AMC-182 V2.00 Features ● ● TO-8-1 High Gain — 28.5 dB Typical Low Noise — 2.7 dB Typical DC IN 0.150 TYP (3.8) RF OUT Guaranteed Specifications* GND 0.220 MIN (5.6) RF IN 0.300 TYP (7.8) 0.018 ± 0.005 DIA (0.46 ±0.13) 4 PINS 0.220 MAX (5.6) 0.450 (11.4) 0.50 DIA (12.7 ±0.5) Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.) : 0.10 OUNCES 2.8 GRAMS C-32 Operating Characteristics MIL-STD-883 screening available. * All specifications apply when operated at +15 VDC, with 50 ohm source and load impedance. This product contains elements protected by U.S. Patent Number 3,891,934. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 0.8W. Must be provided in use. Ordering Information Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.) : 1.62 OUNCES 46 GRAMS Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 AM-/AMC-182 Cascadable Thin Film Amplifier V2.00 Typical Performance GAIN GAIN (dB) 30 -55°C 29 +25°C 28 5 10 +85°C 20 100 200 500 700 950 10001050 VSWR VSWR 2.2 1.8 OUTPUT 1.4 1.0 INPUT 5 10 20 100 200 500 700 950 10001050 INTERCEPT (dBm) NOISE FIGURE (dB) NOISE FIGURE 3.5 +85°C 3.0 +25°C 2.5 2.0 5 10 20 100 200 500 700 950 10001050 INTERMODULATION INTERCEPT 40 f1 - f2 2nd ORDER f1 + f2 30 20 10 3rd ORDER 5 10 20 100 200 500 700 950 10001050 OUTPUT POWER (dBm) 1 dB COMPRESSION 12 11 10 9 5 10 20 100 200 500 700 950 10001050 FREQUENCY MHz Specifications Subject to Change Without Notice. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020