T1/E1/J1 SMD Line Interface Hybrid for Intel Octal LIU APC82246s FEATURES • Suitable for all T1/E1/J1 applications • Compatible with Intel LXT 3108 Octal LIU chip • Minimum board space requirements • Designed for multiple interface line cards • Surface mount footprint • In order to maintain the overvoltage/overcurrent capability of the module, the recommendations for the tracking between the Line and the Tip and Ring port of the module are as follows: Trace width = 0.025in 1oz Copper Trace separation between Tip and Ring 0.025 in minimum to the line part of the module • Longitudinal protection circuit designed to meet FCC part 68, Telcordia GR1089 for 1st level and 2nd level lighting and 1st level power line cross events and EMC EN300 386-2 (European Standard) • Approved to UL 60950 and IEC 60950 safety standards for supplementary insulation SCHEMATIC LINE SIDE IC SIDE INCLUDES: ISOLATION TRANSFORMERS, COMMON MODE CHOKE, PROTECTION COMPONENTS (LINE AND CHIP SIDE) MECHANICAL Side View Front View Bottom View 42.5 Max 8.5 Max 1 0.10 MAX 6 7 8 10.0 ± 0.4 2.2 2.54PITCH IN7PLACES 13.0 MAX SEATED HEIGHT 2 3.0 ± 0.2 0.5 3 4 5 Recommended PCB Layout 9 10 5.0IN2 PLACES 12.7 11.0 1 7.62 1.0 NOTE: ALL DIMENSIONS IN MM ©2003 Bel Fuse Inc. Specifications subject to change without notice. 07.14.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 1 T1/E1/J1 SMD Line Interface Hybrid for Intel Octal LIU APC82246s PACKAGING Tape Format Tape Section Number of Cavities Cavity Status Cover Tape Status Leader 0.3M 15 pcs Empty Sealed Carrier 3.4M 170 pcs T� AP� E�FORMA� T� 0.3M 15 pcs Filled Sealed Empty Sealed Trailer T� AP� E�SE� CT� ION� No� .�CA� VITIES� CA� VITY�ST� AT �U� S�COV� ER�T� AP� E�ST� AT �U� S� LE� AD� ER� 0.3� M�15� pc� s� EMP� TY� SE� AL� ED� CA� RR� IER� 3.4� M�17� 0�pc� s� FILL� ED� AL� ED� SE� TR� AILE� R� 0.3� M�15� pc� s� TY� EMP� AL� ED� SE� DIRE� CT� ION� OF�FE� ED� T� AP� E�DIMENS� IO� NS� USER�DIREC� TI� ON�OF�FEED� COV� ER�T� AP� E� 65�WIDE� Ø1� .50� 20� .00� 2.0� 0� +/-�0.15� 4.0� 0� X� 14� .00�MAX� 1.7� 5� 34� .20� +/-�0.2� 0� 72� .00� 68� .40� SE� CT� ION�X-X� X� Pin�1�of�de� vic� e�to� face�this�side�of�t� ap� e� RE� EL�DIMENS� IO� NS� 20� .20� 33� 0� 15� 0.00� 13� .00� 72� .40� ©2003 Bel Fuse Inc. Specifications subject to change without notice. 07.14.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 2 T1/E1/J1 SMD Line Interface Hybrid for Intel Octal LIU APC82246s MAGNETICS Common Mode Choke Measurement Value Tolerance Test Parameters Inductance (Tip) 37.8uH +/- 30% 10Khz 0.1V Inductance (Ring) 37.8uH +/- 30% “ DCR (Tip) 0.05R Max DCR (Ring) 0.05R Max ISDN Line Transformer Rx Measurement Value Tolerance Test Parameters Inductance (Line) 1.2mH Min 10Khz 0.1V Inductance (Chip) 1.2mH Min “ DCR (Line) 0.5R Max DCR (Chip) 0.5R Max I(leakage) 600uH Max 100Khz 0.1V Turns Ratio 1:1 +/- 2% 100Khz 4.0V pk Hi – Pot 1.5KV 1Sec ISDN Line Transformer Tx Measurement Value Tolerance Test Parameters Inductance (Line) 1.2mH Min 10Khz 0.1V Inductance (Chip) 1.2mH Min “ DCR (Line) 0.5R Max DCR (Chip) 0.5R Max I(leakage) 600uH Max 100Khz 0.1V Turns Ratio 1:1 CT +/- 2% 100Khz 4.0V pk Hi – Pot 1.5KV 1Sec ©2003 Bel Fuse Inc. Specifications subject to change without notice. 07.14.03 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Stewart Connector 45/46 Riverside Medway City Estate Rochester, Kent ME2 4DP U.K. Tel 44-1634-722890 Fax 44-1634-716677 www.belfuse.com Page 3