Relays New Series GD 6A, 230/240VAC, 300VDC SINGLE THROW FOUR POLE Series GD Force guided relay rated for 6A, 230/240 Vac, 300 Vdc Available in 4 pole configuration. Polarized DC Drive. See Table 1 for part numbers. ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS Parameter Min Typ Max Units Operate Time (See Note 1) 17 msec Release Time (See Note 1) 7 msec Switching Frequency 5 Hz Shock (11 msec, See Note 3) 10 g Vibration (10-200 Hz, See Note 3) 5 g Electrical Life 105 Cycles Mechanical Life 107 Cycles Ambient Temperature -25 80 o C • Force Guided Contacts per EN50205: Consists of at least one NO and one NC contact mechanically linked. This allows the contact‘s behavior to be predetermined and the user the ability to monitor the contact.The mechanism provides true status. • Dielectric designed for 3-phase systems. • Contacts are physically linked making it impossible for a NO and NC to be closed simultaneously. • Internal creepage distances and clearances are designed for Overvoltage Category III and Degree of Pollution 2 per IEC 60664. CONTACT SPECIFICATIONS Maximum Load Current 1 Contacts 6 A 2 Contacts 4.2 A 3 Contacts 3.5 A Maximum Switching Voltage 230/240 Vac 300 Maximum Load Capacity (Resistive) FEATURES: • Wide range of Contact configurations and Coil Voltages. APPROVALS: CUL: Approved TÜV / VDE: Pending Vdc 1500/30 VA/W ACCESSORIES:Contact Factory Maximum Switching Capacity (Inductive) Contact Resistance (See Note 2) AC15-230/240V DC13-24V 4 Arms 2 Adc 100 mOhm Dielectric Test Voltage (O=III, P=2) Coil to Contact 2500 Vac Contact to Contact 2000 Vac © 2000 TELEDYNE RELAYS Current regulator unit DIL housing Current regulator unit SO.8 housing Removing tool Socket with soldering pins for PCB mounting Socket for conventional mounting. 800-284-7007 • www.teledynerelays.com GD 1 Series GD Outline Dimensions VIEW FROM TERMINALS (mm) (mm) (mm) 4 POLE PACKAGE 3NO/1NC 2NO/2NC Characteristics Table Part No. Contacts GD31-1002 GD31-1003 GD31-1009 GD31-1010 GD22-1016 GD22-1017 GD22-1019 GD22-1023 GD22-1024 GD31-1050 GD22-1051 GD31-1130 GD31-1133 GD31-1140 3NO/1NC 3NO/1NC 3NO/1NC 3NO/1NC 2NO/2NC 2NO/2NC 2NO/2NC 2NO/2NC 2NO/2NC 3NO/1NC 2NO/2NC 3NO/1NC 3NO/1NC 3NO/1NC Contact Material (/Gold Plating) AgNi/0.2 AgNi/0.2 AgNi/2.0 AgNi/2.0 AgNi/0.2 AgNi/0.2 AgNi/0.2 AgNi/2.0 AgNi/2.0 AgNi/0.2 AgNi/0.2 AgNi/2.0 AgNi/0.2 AgNi/2.0 Coil Resistance (Ohm)±12% 255 1,020 255 1,020 255 1,020 3,910 255 1,020 820 820 820 1,020 1,020 Coil Voltage (Nominal @ 25°C) 12 24 12 24 12 24 48 12 24 22 22 22 24 24 TABLE 1 Notes: 1) Timing varies with coils voltage. 2) For new contacts only. 3) Contacts will not chatter in excess of 1ms. GD 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2000 TELEDYNE RELAYS