ETC NUP4101FCT1/D

NUP4101FCT1
Advance Information
5-Pin Lateral Bi-Directional
Zener Array
http://onsemi.com
Features
•
•
•
•
Small Footprint – 51 x 51 mil
Low Profile – < 0.6 mm
4 Bi–Directional Lateral Zener Array
ESD Protection per IEC1000–4–2, MIL STD 883c
4
1
5
3
2
Typical Applications
•
•
•
•
•
GSM Handsets and Accessories
Other Telephone Sets
Computers
Printers
Set Top Boxes
4
3
MAXIMUM RATINGS
Rating
5
Symbol
Value
Unit
IEC1000–4–2 Air Discharge
IEC1000–4–2 Contact Discharge
MIL STD 883c – Method 3015–6
ESD
±15 k
±8 k
±16 k
Volts
Maximum Junction Temperature
TJ(max)
150
°C
1
Characteristic
Min
Typ
Max
Unit
VZ
@ 1 mA
15
TBD
–
V
IR
@3V
–
–
TBD
A
@ 0 V Bias
–
TBD
25
pF
Capacitance
Figure 1. Schematic
ORDERING INFORMATION
ELECTRICAL CHARACTERISTICS
Symbol
2
There is no ordering information available at this time. This
data sheet is preliminary in nature.
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
 Semiconductor Components Industries, LLC, 2002
May, 2002 – Rev. 1
1
Publication Order Number:
NUP4101FCT1
NUP4101FCT1
PACKAGE DIMENSIONS
1.3 mm
0.3 mm Diameter
Solder Balls
A3
1.3 mm
A1
B3
C3
C1
0.5 mm
Bottom View
0.707 mm
0.66 mm
0.25 mm
0.30 mm
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: [email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
http://onsemi.com
2
NUP4101FCT1/D