PRELIMINARY DATA SHEET LASER DIODE NX8560LJ-CC EA MODULATOR INTEGRATED 1 550 nm MQW-DFB LASER DIODE MODULE FOR 10 Gb/s APPLICATIONS DESCRIPTION The NX8560LJ-CC is an Electro-Absorption (EA) modulator integrated, 1 550 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode. It is capable of transmitting up to 40 km (dispersion: 800 ps/nm) for 10 Gb/s applications by using standard fiber. FEATURES • Integrated electroabsorption modulator • Up to 40 km transmission 10 Gb/s (dispersion: 800 ps/nm) • Low modulation voltage • 7-pin butterfly package with GPOTM connector • Available for DWDM wavelengths based on ITU-T recommendations • Butterfly package with SC-UPC connector PACKAGE DIMENSIONS (UNIT: mm, unless otherwise specified ±0.2 mm) 15.24 5.4 4 – φ2.67 6.0 1 2.54 LD MOD PIN CONNECTIONS 26.04±0.13 Pin No. Optical Fiber (SMF) with SC Connector Length : 1 225 MIN. 0.75 Thermistor 5.08 20.83±0.13 8.0 ±0.2 #1 12.7±0.15 0.9 7 TOP VIEW #7 – + Cooler PD 21.4±0.6 4.55 8.89±0.13 1.25 10 MIN. 2.54 30.0 1 2 3 4 5 6 7 Function Thermistor Thermistor LD DC Bias PD Anode PD Cathode Cooler Anode Cooler Cathode The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PL10110EJ01V0DS (1st edition) (Previous No. P14748EJ4V0DS00) Date Published April 2002 CP(K) Printed in Japan The mark • shows major revised points. NEC Corporation 2000 NEC Compound Semiconductor Devices 2002 NX8560LJ-CC OPTICAL FIBER CHARACTERISTICS Parameter Specification Unit Mode Field Diameter 9.3±0.5 µm Cladding Diameter 125±1 µm Tight Buffer Diameter 900±100 µm Cut-off Wavelength < 1 270 nm Attenuation 1 525 to 1 575 nm < 0.3 dB/km Minimum Fiber Bending Radius 30 mm 1 225 MIN. mm Fiber Length Flammability UL1581 VW-1 SC-UPC Connector Fiber Length: 1 225 mm MIN. 2 Preliminary Data Sheet PL10110EJ01V0DS 8.99±0.5 mm 35±2 mm NX8560LJ-CC ORDERING INFORMATION: Wavelength is a certain point between 1 530 nm and 1 563 nm @ TLD = Tset (SC-UPC Connector) Part Number NX8560LJ-CC Available Connector With SC-UPC Connector ORDERING INFORMATION: Wavelength on ITU-T grid @ TLD = Tset *1 Part Number ITU-T Wavelength Frequency With SC-UPC Connector (nm) (THz) NX8560LJ303-CC 1530.33 195.90 NX8560LJ311-CC 1531.11 195.80 NX8560LJ318-CC 1531.89 195.70 NX8560LJ326-CC 1532.68 195.60 NX8560LJ334-CC 1533.46 195.50 NX8560LJ342-CC 1534.25 195.40 NX8560LJ350-CC 1535.03 195.30 NX8560LJ358-CC 1535.82 195.20 NX8560LJ366-CC 1536.60 195.10 NX8560LJ373-CC 1537.39 195.00 NX8560LJ381-CC 1538.18 194.90 NX8560LJ389-CC 1538.97 194.80 NX8560LJ397-CC 1539.76 194.70 NX8560LJ405-CC 1540.55 194.60 NX8560LJ413-CC 1541.35 194.50 NX8560LJ421-CC 1542.14 194.40 NX8560LJ429-CC 1542.93 194.30 NX8560LJ437-CC 1543.73 194.20 NX8560LJ445-CC 1544.52 194.10 NX8560LJ453-CC 1545.32 194.00 NX8560LJ461-CC 1546.11 193.90 NX8560LJ469-CC 1546.91 193.80 NX8560LJ477-CC 1547.71 193.70 NX8560LJ485-CC 1548.51 193.60 NX8560LJ493-CC 1549.31 193.50 NX8560LJ501-CC 1550.11 193.40 NX8560LJ509-CC 1550.91 193.30 NX8560LJ517-CC 1551.72 193.20 NX8560LJ525-CC 1552.52 193.10 *1 The value which omitted and computed the 3rd place below the decimal point Preliminary Data Sheet PL10110EJ01V0DS 3 NX8560LJ-CC *1 Part Number ITU-T Wavelength Frequency With SC-UPC Connector (nm) (THz) NX8560LJ533-CC 1553.32 193.00 NX8560LJ541-CC 1554.13 192.90 NX8560LJ549-CC 1554.94 192.80 NX8560LJ557-CC 1555.74 192.70 NX8560LJ565-CC 1556.55 192.60 NX8560LJ573-CC 1557.36 192.50 NX8560LJ581-CC 1558.17 192.40 NX8560LJ589-CC 1558.98 192.30 NX8560LJ597-CC 1559.79 192.20 NX8560LJ606-CC 1560.60 192.10 NX8560LJ614-CC 1561.41 192.00 NX8560LJ622-CC 1562.23 191.90 NX8560LJ630-CC 1563.04 191.80 *1 The value which omitted and computed the 3rd place below the decimal point ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit Pf 10 mW Forward Current of LD IFLD 150 mA Reverse Voltage of LD VRLD 2.0 V Forward Voltage of Modulator VFEA 1 V Reverse Voltage of Modulator VREA 4 V Forward Current of PD IFPD 1 mA Reverse Voltage of PD VRPD 10 V Cooler Current IC 1.5 A Cooler Voltage VC 2.5 V Operating Case Temperature TC −20 to +70 °C Storage Temperature Tstg −40 to +85 °C Lead Soldering Temperature Tsld 260 (10 sec.) °C Optical Output Power from Fiber 4 Preliminary Data Sheet PL10110EJ01V0DS NX8560LJ-CC ELECTRO-OPTICAL CHARACTERISTICS (TLD = 25°°C, TC = 25°°C, BOL, unless otherwise specified) Parameter Symbol Conditions MIN. Laser Set Temperature Tset *1 20 Operating Current Iop TLD = Tset 50 TYP. 60 MAX. Unit 35 °C 80 mA Modulation Center Voltage Vcenter −2.0 −0.5 V Modulation Voltage Vmod 2.0 3.0 V Forward Voltage of LD VFLD IFLD = Iop 2.0 V Ith TLD = Tset 20 mA Threshold Current Optical Output Power from Fiber Pf Peak Emission Wavelength λp Side Mode Suppression Ratio Extinction Ratio Rise Time tr Fall Time tf Dispersion Penalty Optical Isolation Input Return Loss *1 NX8560LJ-CC DP −1.0 Under modulation IFLD = Iop, VEA = 0 V, TLD = Tset SMSR ER 6 *2 1 530 IFLD = Iop, VEA = 0 V ITU-T 1 563 30 *2 Under modulation 10 nm dB 11 *2 20-80%, Under modulation *2 80-20%, Under modulation *2, 4 40 km SMF under modulation Is S11 dBm *3 dB 40 ps 40 ps 2.0 dB 23 dB IFLD = Iop, VEA = −1 V, f = 130 MHz to 5 GHz −10 −8 IFLD = Iop, VEA = −1 V, f = 5 GHz to 10 GHz −8 −5 dB : Tset is a certain point between 20°C and 35°C NX8566LJ×××-CC : Tset is set at a certain point between 20°C and 35°C for ITU-T grid wavelength 23 *2 40 km SMF under modulation, 9.95328 Gb/s, PRBS 2 −1, VEA = Vcenter ± 1/2Vmod, IFLD = Iop, TLD = Tset, NEC Test System Vcenter : a certain point between −0.5 V and −1.5 V Vmod : a certain point between 2 V and 3 V Iop : a certain point between 50 mA and 80 mA *3 Available for DWDM wavelengths based on ITU-T recommendations (100 GHz grid). Please refer to ORDERING INFORMATION. 10 *4 BER = 10− Preliminary Data Sheet PL10110EJ01V0DS 5 NX8560LJ-CC ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = 25°°C, TC = −20 to +70°°C) Parameter Symbol Conditions MIN. TYP. Unit 1 100 µA Monitor Current Im VRPD = 5 V, IFLD = Iop, VEA = 0 V Dark Current ID VRPD = 5 V, VEA = 0 V 10 nA Terminal Capacitance Ct VRPD = 5 V, f = 1 MHz 15 pF Tracking Error γ Im = const. 0.5 dB *1 30 MAX. *1 Tracking Error: γ Pf (mW) TLD = TC = 25˚C Pop TLD = 25˚C, TC = –20 to +70˚C Pf γ = 10 log 0 Im Pf Pop [dB] Im ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = 25°°C, TC = −20 to +70°°C) Parameter Symbol Conditions TYP. MAX. Unit 9.5 10.0 10.5 kΩ 3 350 3 450 3 550 K Thermistor Resistance R B Constant B Cooler Current IC ∆T = 50°C 1.2 A Cooler Voltage VC ∆T = 50°C 2.4 V 6 TLD = 25°C MIN. Preliminary Data Sheet PL10110EJ01V0DS NX8560LJ-CC TYPICAL CHARACTERISTICS (TLD = 25°°C, unless otherwise specified) EXTINCTION RATIO vs. MODULATOR VOLTAGE 0 4 VREA = 0 V Extinction Ratio ER (dB) Optical Output Power from Fiber Pf (mW) OPTICAL OUTPUT POWER FROM FIBER (CW) vs. FORWARD CURRENT 3 0.5 V 2 1 0 1V 2V 3V 50 100 150 200 5 10 15 20 25 0 1 2 3 Revers Voltage of Modulator VREA (V) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. Preliminary Data Sheet PL10110EJ01V0DS 7 NX8560LJ-CC DFB-LD FAMILY Absolute Maximum Ratings Part Number TC (°C) Electro-Optical Characteristics (TC = 25°C) Tstg (°C) Ith (mA) Pf (mW) λp (nm) TYP. MIN. TYP. NX8300BE-CC NX8300CE-CC 0 to +75 −40 to +85 15 2 NX8303BG-CC NX8303CG-CC −10 to +85 −40 to +85 15 2 NX8503BG-CC NX8503CG-CC −10 to +85 −40 to +85 15 2 Application Package *1 1 310 2.5 Gb/s: STM-16 (S-16.1, L-16.1) Coaxial *1 1 310 622 Mb/s: STM-4 (L-4.1) Coaxial *1 1 550 156 Mb/s: STM-1 (L-1.2, L-1.3) Coaxial 622 Mb/s: STM-4 (L-4.2, L-4.3) NX8504BE-CC NX8504CE-CC −10 to +85 −40 to +85 15 2 1 550 NX8560LJ-CC −20 to +70 −40 to +85 6 −1 dBm 1 550 *1 622 Mb/s: STM-4 (L-4.2, L-4.3) Coaxial ≤ 10 Gb/s: STM-64 BFY with GPO CW Light Source for external modulator BFY CW Light Source for external modulator BFY 2.5 Gb/s: STM-16, 360 km EA modulator integrated BFY 2.5 Gb/s: STM-16, 600 km EA modulator integrated BFY 2.5 Gb/s: STM-16, 240 km EA modulator integrated BFY *2 CW Light Source with λ monitoring PD BFY *2 CW Light Source with λ monitoring PD BFY *2 *2 NX8562LB −20 to +65 −40 to +85 20 20 1 550 NX8563LB −20 to +65 −40 to +85 20 10 1 550 NX8564LE-CC −20 to +70 −40 to +85 7 −2 dBm*1 1 550 NX8565LE-CC −20 to +70 −40 to +85 7 −2 dBm*1 1 550 NX8566LE-CC −20 to +70 −40 to +85 7 0 dBm 1 550 NX8570 Series −20 to +70 −40 to +85 20 20 1 550 NX8571 Series −20 to +70 −40 to +85 20 10 1 550 *2 *2 *2 *2 *1 TYP. *2 Available for DWDM Wavelengths based on ITU-T recommendations 8 Preliminary Data Sheet PL10110EJ01V0DS NX8560LJ-CC REFERENCE Document Name Document No. Optical semiconducrtor devices for fiberoptic communications Selection Guide P12480E Opto-Electronics Devices Pamphlet P13623E Opto-Electronics Devices (CD-ROM) P12944X NEC semiconductor device reliability/quality control system Quality grades on NEC semiconductor devices *1 C11159E *1 SEMICONDUCTOR SELECTION GUIDE −Products and Packages− C11531E *1 X13769E *1 Published by NEC Corporation Preliminary Data Sheet PL10110EJ01V0DS 9 NX8560LJ-CC • PATENT USP 4,826,295 CA 1,286,848 EP 143 000 • GPO is a trademark of Gilbert Engineering Co., Inc. • The information in this document is current as of April 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 10 Preliminary Data Sheet PL10110EJ01V0DS NX8560LJ-CC SAFETY INFORMATION ON THIS PRODUCT DANGER SEMICONDUCTOR LASER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM OUTPUT POWER mW MAX WAVELENGTH nm CLASS lllb LASER PRODUCT Warning Laser Beam AVOID EXPOSURE-Invisible Laser Radiation is emitted from this aperture A laser beam is emitted from this diode during operation. The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of eyesight. • Do not look directly into the laser beam. • Avoid exposure to the laser beam, any reflected or collimated beam. Caution GaAs Products The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled or ingested. • Do not destroy or burn the product. • Do not cut or cleave off any part of the product. • Do not crush or chemically dissolve the product. • Do not put the product in the mouth. Follow related laws and ordinances for disposal. The product should be excluded from general industrial waste or household garbage. Caution Optical Fiber A glass-fiber is attached on the product. Handle with care. • When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments. Business issue NEC Compound Semiconductor Devices, Ltd. 5th Sales Group, Sales Division TEL: +81-3-3798-6372 FAX: +81-3-3798-6783 E-mail: [email protected] NEC Compound Semiconductor Devices Hong Kong Limited Hong Kong Head Office FAX: +852-3107-7309 TEL: +852-3107-7303 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office FAX: +82-2-528-0302 TEL: +82-2-528-0301 NEC Electron Devices European Operations http://www.nec.de/ TEL: +49-211-6503-101 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Technical issue NEC Compound Semiconductor Devices, Ltd. http://www.csd-nec.com/ Sales Engineering Group, Sales Division E-mail: [email protected] FAX: +81-44-435-1918 0110