IS/ISO 9002 Lic# QSC/L- 000019.2 Continental Device India Limited An IS/ISO 9002 and IECQ Certified Manufacturer NPN SILICON PLANAR EPITAXIAL TRANSISTORS BC167A, BC167B BC168A, BC168B, BC168C BC169B, BC169C TO-92 Plastic Package AF Pre and Driver Stages as well as for Universal Application. ABSOLUTE MAXIMUM RATINGS(Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL VCEO Collector -Emitter Voltage VCES Collector -Emitter Voltage BC167 45 BC168 20 BC169 20 UNITS V 50 30 30 V VEBO 6.0 5 5 V Collector Current Continuous IC 100 100 50 mA Collector Peak Current ICM 200 200 IB 50 50 Emitter -Base Voltage Base Current Power Dissipation @ Ta=25ºC Ptot Storage Junction Tstg Junction Temperature THERMAL RESISTANCE Junction to Ambient BC167 BC168, 169 5 mA 300 mW -55 to +150 ºC Tj 150 ºC Rth(j-a) 420 K/W ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION MIN BVCEO IC=2mA,IB=0 45 Collector -Emitter Voltage BC167 BC168, 169 20 Emitter-Base Voltage mA BVEBO IE=1µA, IC=0 TYP MAX UNITS V V 6 5 V V Collector-Cut off Current ICES VCE=50V,VBE=0 15 nA 15 nA BC167 VCE=30V,VBE=0 Ta =125ºC VCE=50V,VBE=0 4 µA BC168, 169 VCE=30V,VBE=0 4 µA BC167 BC168, 169 Continental Device India Limited Data Sheet Page 1 of 5 NPN SILICON PLANAR EPITAXIAL TRANSISTORS BC167A, BC167B BC168A, BC168B, BC168C BC169B, BC169C TO-92 Plastic Package ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION MIN DC Current Gain A B C hFE IC=0.01mA,VCE=5V IC=2mA,VCE=5V A B C MAX UNITS 90 150 270 120 180 380 IC=100mA,VCE=5V BC167A, 168A BC167B, 168B BC168C TYP 220 460 800 120 200 400 Collector Emitter Saturation Voltage VCE(Sat)* VCE(Sat)* IC=10mA,IB=0.5mA IC=100mA,IB=5mA** 0.2 0.6 V V Base Emitter Saturation Voltage VBE(Sat) * VBE(Sat) * IC=10mA,IB=0.5mA IC=100mA,IB=5mA** 0.83 1.05 V V VBE(On) IC=2mA,VCE=5V IC=0.1mA,VCE=5V IC=100mA,VCE=5V** 0.7 V V V MAX UNITS Base Emitter On Voltage DESCRIPTION DYNAMIC CHARACTERISTICS Transistors Frequency SYMBOL TEST CONDITION fT Collector Capacitance Ccbo Emitter Capaitance Cebo Continental Device India Limited IC=0.5mA, VCE=3V f=100MHz IC=10mA, VCE=5V f=100MHz VCB=10V, IE=0 f=1MHz VEB =0.5V, f =1MHz Data Sheet 0.55 0.55 0.83 MIN TYP 85 MHz 150 MHz 4.5 8.0 pF pF Page 2 of 5 NPN SILICON PLANAR EPITAXIAL TRANSISTORS BC167A, BC167B BC168A, BC168B, BC168C BC169B, BC169C TO-92 Plastic Package DESCRIPTION SYMBOL TEST CONDITION MIN TYP MAX UNITS 4.0 dB DYNAMIC CHARACTERISTICS Noise Figure Small Signall Current Gain BC169 A NF BC167, 168 BC169 NF A B C h11e A B C h12e A B C A B C h21e Small Signall Current Gain IC=0.2mA, VCE=5V Rg=2W, f=30HZ to 15kHz IC=0.2mA, VCE=5V Rg=2W, f=1kHZ , f=200Hz IC=2mA, VCE=5V, f=1kHz 10 4 1.6 3.2 6.0 4.5 8.5 16 10-4 1.5 2.0 3.0 125 240 450 h22e dB dB kW kW kW 260 500 900 30 60 110 µ MHO µ MHO µ MHO ** Measuring Values not for BC169 * The transistor is overdriven to such an extent that the static forward current transfer ratio has decreased to hFE =20 Continental Device India Limited Data Sheet Page 3 of 5 BC167A, BC167B BC168A, BC168B, BC168C BC169B, BC169C TO-92 Plastic Package TO-92 Plastic Package B Ammo Pack Style Uncontrolled MECHANICAL DATA h P T h (p) A1 LABEL H1 Carrier Strip FLAT SIDE 183 mm A A W2 H0 L Wo W1 W t1 F1 t 1 F2 F 4 mm2 Do P2 Po K 2 3 D A A DIM C 3 2 1 H F F ITEM 3 2 1 SEC AA G PIN CONFIGURATION 1. BASE 2. COLLECTOR 3. EMITTER 331m m Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions in mm unless specified otherwise D E Beyond 'L' Solderability Ensured D FEE Adhesive Tape on Top Side L Dimension With 'L' TO-92 Transistors on Tape and Ammo Pack A B C D E F G H K L MIN. MAX. 4.32 5.33 4.45 5.20 3.18 4.19 0.41 0.55 0.35 0.50 5 DEG 1.14 1.40 1.14 1.53 12.70 — 1.982 2.082 All diminsions in mm. SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH A1 A T P Po FEED HOLE CENTRE TO COMPONENT CENTRE P2 DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION F h W Wo W1 HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, W2 Ho H1 L Do t F2 CLINCH HEIGHT PULL - OUT FORCE H2 (P) SPECIFICATION REMARKS MIN. NOM. MAX. TOL . 4.8 4.0 5.2 4.8 4.2 3.9 12.7 ±1 12.7 ±0.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH 6.35 ±0.4 TO BE MEASURED AT BOTTOM OF CLINCH +0.6 5.08 -0.2 1 0 AT TOP OF BODY 18 ±0.5 6 ±0.2 9 +0.7 -0.5 0.5 ±0.2 16 ±0.5 23.25 11.0 4 ±0.2 1.2 t1 0.3 - 0.6 2.54 +0.4 -0.1 3 6N NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES. Packing Detail PACKAGE TO-92 Bulk TO-92 T&A STANDARD PACK Details Net Weight/Qty 1K/polybag 200 gm/1K pcs 2K/ammo box 645 gm/2K pcs Continental Device India Limited INNER CARTON BOX Size Qty 3" x 7.5" x 7.5" 5K 12.5" x 8" x 1.8" 2K Data Sheet OUTER CARTON BOX Size Qty Gr Wt 17" x 15" x 13.5" 80K 23 kgs 17" x 15" x 13.5" 32K 12.5 kgs Page 4 of 5 Notes BC167A, BC167B BC168A, BC168B, BC168C BC169B, BC169C TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 e-mail [email protected] www.cdil.com Continental Device India Limited Data Sheet Page 5 of 5