Visual Products ITM-US5181 USB Camera Module General Description The ITM-US5181 is an USB Camera module of SVGA resolution. It utilizes an advanced CMOS imager sensor as well as a sophisticate USB controller chip to provide excellent picture quality. It designs for maximum throughput of video image data enables host systems to acquire larger amounts of video information in a more real-time manner. An on-chip proprietary high-performance compression engine capable of a 8:1 compression ratio ensures fast image transfers from the image sensor to the PC. It supports 8 isochronous interface alternates of up to 7.5 Mbps USB transfer rate. A plug and play software driver is provider for Windows 98/Me application. Specification Module Lens Focus Board size Connector Power Requirement Power Consumption f 6.0 mm, F 1.6 manual adjust 63 × 43 mm USB cable DC 5V via USB cable 0.6 W Imager Array Elements Pixel Size Image Area Min illumination S/N Ratio 800 × 600 6.2 × 6.2 µm 4.96 × 3.72 mm < 5 lux @ f 1.2 (3000 K) > 48 dB Mechanical Dimension in mm Features Still picture of 800 × 600 pixel uncompressed Video of VGA resolution (640 × 480), 10–15 fps 30 FPS at CIF format USB full speed signaling bit rate USB compliance current consumption No external power supply Single board solution Auto gain, white balance control Powerful compression software Lens f = 6 mm Twain interface Hardware snap shot Other Module in this Series Model ITM-US5172 ITM-US5162 ITM-US5163 Sensor VGA (640 × 480) CIF (352 × 288) CIF (352 × 288) System requirements for PC OS........................................ CPU ...................................... Memory................................ Interface............................... Windows 98/Me Pentium 166 or higher with mmx min 16 MB RAM USB connector Application Example Video Conference Video Email PC Multimedia Lens f 6.0/F 1.6 f 4.3/F 3.5 f 4.3/F 3.5