Visual Products ITM-C-DSA (PAL) ITM-C-26 A (NTSC) Color Camera Module with Microphone General Description This is a family of products based on the most advance CMOS mixed signal technology. It integrates image array, signal processing, timing and control circuitry, all on a single chip. It is ideal for applications requiring a small footprint, low power and low cost. Features Small size............................. 29 x 29 mm Wide operation voltage......... 8 – 15V Lens ..................................... f6.0mm F1.6 IR filter ................................. Built in Low power consumption ...... <200mW Direct connect to standard video monitor On-chip auto exposure control Gamma correction................ 0.45/1.0 Auto gain control .................. 18dB White balance ...................... automatic Black level calibration .......... automatic Built in microphone High sensitivity microphone circuit Application Example Video conferencing · Video Phone · Video email PC multimedia · Security and Surveillance System · Toys Specification Product Imager Scanning Shutter Video Output Picture Element Effect. image area Resolution S/N Ratio Min. Illumination Audio Output Min Audio Input Operation Voltage Connectors Lens ITM-C-DSA (PAL) ITM-C-26A (NTSC) CMOS imager sensor CMOS imager sensor 2:1 Interlace 2:1 Interlace 1/60 to 1/15,000 sec 1/60 to 1/15,000 sec Compos. video (75Ω) Compos. video (75Ω) 628 x 582 pixel 510 x 492 pixel 5.78 x 4.19mm 4.69 x 3.54mm 340 TV Lines 340 TV Lines >42dB (AGC on ) >42dB (AGC on ) 3Lux at f1.2 (3000K) 3Lux at f1.2 (3000K) 1V p-p 1V p-p 10mV 10mV 8 – 15 VDC 8 – 15 VDC PWR, Video, GND PWR, Video, GND f6.0mm F1.6, FOV 51° x 43° Layout and Dimensions [in mm] Pin Description CVO GND AUD PWR Composite video output, can be directly connected to TV/monitor Common ground for power and video Audio output, connect to speaker or TV audio in DC Power supply 8V to 15V CVO GND AUD PWR 11