Specifications for Surface Mount Type PD-Preamp Module with Multi Mode Fiber 622Mbps OD8226P Receipt Issued: Mar. / 12 / 01 Drawing Number:JOG-00827 1st edition OD8226P Page 1 to 3 1/3 OD8226P PD-Preamp Module 1.DESCRIPTION The surface mount type PD-Preamp module is a 1.3µm, InGaAs PIN photo diode coupled to a multi mode fiber with a pigtail. It is designed for STM4/OC12. 2.ABSOLUTE MAXIMUM RATINGS (Ta=25 Deg.C, unless otherwise specified) Ratings Unit Parameter Supply Voltage Optical Input Power Operating Temperature(Ta) Storage Temperature Lead Soldering Temperature (10s) 5.5 4 -40 to 85 -40 to 85 260 V dBm Deg.C Deg.C Deg.C 3.SPECIFICATION Parameter Supply Voltage Supply Current Bandwidth Responsivity Sensitivity Low Frequency Cutoff Optical Return Loss (Ta=25 Deg.C, Wavelength=1310nm) Conditions Min Typ Max Unit 3.0 3.3 3.6 V 12 25 35 mA f3dB 590 MHz Differential ,measured 3.7 6.8 kV/W with –22dBm signal BER<10-10(Note1) -33.2 dBm f3dB 150 KHz -27 dB Note1:Data rate:622Mbps;data sequence:PRBS 223-1 2/3 4.OUTLINE DRAWING (unit : mm) No. 1 2 3 4 5 6 7 8 Function Vcc GND GND OUTN(-) OUTP(+) NC NC GND 5.CONNECTOR AND FIBER SPECIFICATIONS Connector SC-PC Fiber 50µm Multi Mode Fiber Diameter : 0.9mm Color : Blue Bending Radius : 20mm(min) Heat-resistant Length : 1000mm 3/3