ETC V1531C5

Back
Miniature Basic Switch
V
Reliable and Safe Basic Switch
Best seller series with switching currents of 10 to
21 A.
Applications include not only industrial equipment
but also commercial products (OEM).
Available in two types of cases:
thermoplastic resin and thermosetting resin.
RC SD+
716
Ordering Information
Consult OMRON for standard approvals of models.
Ordering Information
General-purpose
Thermoplastic Case
Actuator
Pin plunger
Contact
Co
ac
f
form
Terminals
e
as
(
t )
(see
note)
21 A
Without barrier
Right-hand barrier
Left-hand barrier
SPDT
C
V-21-1C6
V-21-1CR6
V-21-1CL6
SPST-NC
C
V-21-2C6
V-21-2CR6
V-21-2CL6
SPST-NO
C
V-21-3C6
V-21-3CR6
V-21-3CL6
Short hinge lever
SPDT
C
V-211-1C6
---
---
Hinge lever
SPDT
C
V-212-1C6
---
---
Long hinge lever
SPDT
C
V-213-1C6
---
---
Simulated hinge lever
SPDT
C
V-214-1C6
---
---
Short hinge roller lever
SPDT
C
V-215-1C6
---
---
Hinge roller lever
SPDT
C
V-216-1C6
---
---
Note:
C:
Quick-connect terminal (#250)
59
V
V
Actuator
Pin plunger
Co ac
Contact
f
form
SPDT
SPST-NC
SPST-NO
Short
S
o hinge
ge lever
e e
Hinge
ge lever
e e
Long hinge lever
Simulated hinge
g lever
Short hinge
g roller lever
Hinge roller lever
Note:
60
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
A: Solder/quick-connect terminal (#187)
C2: Quick-connect terminal (#187)
C: Quick-connect terminal (#250)
Terminals
e
as
((see note)
t )
16 A
Without barrier
Right-hand barrier
Left-hand barrier
A
V-16-1A5
V-16-1AR5
V-16-1AL5
C2
V-16-1C25
V-16-1C2R5
V-16-1C2L5
C
V-16-1C5
---
---
A
V-16-2A5
V-16-2AR5
V-16-2AL5
C2
V-16-2C25
V-16-2C2R5
V-16-2C2L5
C
V-16-2C5
---
---
A
V-16-3A5
V-16-3AR5
V-16-3AL5
C2
V-16-3C25
V-16-3C2R5
V-16-3C2L5
C
V-16-3C5
---
---
A
V-161-1A5
---
---
C2
V-161-1C25
---
---
C
V-161-1C5
---
---
A
V-162-1A5
---
---
C2
V-162-1C25
---
---
C
V-162-1C5
---
---
A
V-163-1A5
---
---
C2
V-163-1C25
---
---
C
V-163-1C5
---
---
A
V-164-1A5
---
---
C2
V-164-1C25
---
---
C
V-164-1C5
---
---
A
V-165-1A5
---
---
C2
V-165-1C25
---
---
C
V-165-1C5
---
---
A
V-166-1A5
---
---
C2
V-166-1C25
---
---
C
V-166-1C5
---
---
V
V
Actuator
Pin plunger
Short
S
o hinge
ge lever
e e
Hinge
ge lever
e e
Long hinge lever
Simulated hinge
g lever
Short hinge
g roller lever
Hinge
ge roller
o e lever
e e
Note:
Contact form
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
Terminals (see note)
11 A
A
V-11-1A4
C2
V-11-1C24
C
V-11-1C4
A
V-111-1A4
C2
V-111-1C24
C
V-111-1C4
A
V-112-1A4
C2
V-112-1C24
C
V-112-1C4
A
V-113-1A4
C2
V-113-1C24
C
V-113-1C4
A
V-114-1A4
C2
V-114-1C24
C
V-114-1C4
A
V-115-1A4
C2
V-115-1C24
C
V-115-1C4
A
V-116-1A4
C2
V-116-1C24
C
V-116-1C4
A: Solder/quick-connect terminal (#187)
C2: Quick-connect terminal (#187)
C: Quick-connect terminal (#250)
61
V
V
Thermosetting Case
Actuator
Pin plunger
Contact
Co
ac
f
form
SPDT
SPST-NC
SPST-NO
Short
S
o hinge
ge lever
e e
Hinge
ge lever
e e
SPDT
Long hinge lever
Simulated hinge
g lever
Short hinge
g roller lever
Hinge roller lever
Note:
62
A:
C2:
C:
B:
E:
SPDT
SPDT
SPDT
SPDT
SPDT
Solder/quick-connect terminal (#187)
Quick-connect terminal (#187)
Quick-connect terminal (#250)
Screw terminal
Solder terminal
Terminals
e
as
(
t )
(see
note)
15 A
10 A
OF: 200 gf
OF: 100 gf
A
V-15-1A5
V-10-1A5
V-10-1A4
C2
V-15-1C25
V-10-1C25
V-10-1C24
C
V-15-1C5
---
---
B
V-15-1B5
V-10-1B5
V-10-1B4
E
V-15-1E5
V-10-1E5
V-10-1E4
A
V-15-2A5
V-10-2A5
V-10-2A4
C2
V-15-2C25
V-10-2C25
V-10-2C24
C
V-15-2C5
---
---
A
V-15-3A5
V-10-3A5
V-10-3A4
C2
V-15-3C25
V-10-3C25
V-10-3C24
C
V-15-3C5
---
---
A
V-151-1A5
V-101-1A5
V-101-1A4
C2
V-151-1C25
V-101-1C25
V-101-1C24
B
V-151-1B5
V-101-1B5
V-101-1B4
E
V-151-1E5
V-101-1E5
V-101-1E4
A
V-152-1A5
V-102-1A5
V-102-1A4
C2
V-152-1C25
V-102-1C25
V-102-1C24
B
V-152-1B5
V-102-1B5
V-102-1B4
E
V-152-1E5
V-102-1E5
V-102-1E4
A
V-153-1A5
V-103-1A5
V-103-1A4
C2
V-153-1C25
V-103-1C25
V-103-1C24
B
V-153-1B5
V-103-1B5
V-103-1B4
E
V-153-1E5
V-103-1E5
V-103-1E4
A
V-154-1A5
V-104-1A5
V-104-1A4
C2
V-154-1C25
V-104-1C25
V-104-1C24
B
V-154-1B5
V-104-1B5
V-104-1B4
E
V-154-1E5
V-104-1E5
V-104-1E4
A
V-155-1A5
V-105-1A5
V-105-1A4
C2
V-155-1C25
V-105-1C25
V-105-1C24
B
V-155-1B5
V-105-1B5
V-105-1B4
E
V-155-1E5
V-105-1E5
V-105-1E4
A
V-156-1A5
V-106-1A5
V-106-1A4
C2
V-156-1C25
V-106-1C25
V-106-1C24
B
V-156-1B5
V-106-1B5
V-106-1B4
E
V-156-1E5
V-106-1E5
V-106-1E4
V
V
Heat Resistant Models
Actuator
15 A
10 A
Pin plunger
V-15-1A5-T
V-10-1A4-T
Short hinge lever
V-151-1A5-T
V-101-1A4-T
Hinge lever
V-152-1A5-T
V-102-1A4-T
Long hinge lever
V-153-1A5-T
V-103-1A4-T
Simulated hinge lever
V-154-1A5-T
V-104-1A4-T
Short hinge roller lever
V-155-1A5-T
V-105-1A4-T
Hinge roller lever
V-156-1A5-T
V-106-1A4-T
Note:
Terminals: solder and quick-connect (#187)
Barrier (V-21 and V-16 Series Only)
Right-hand Barrier
Left-hand Barrier
Model Number Legend
V-jjj-jjjj-j
1
2
3
4
5
6
7
8
1.
Ratings
21: 21 A
16: 16 A
15: 15 A
11: 11 A
10: 10 A
5.
Terminals
A: Solder/quick-connect terminal (#187)
C2: Quick-connect terminal (#187)
C: Quick-connect terminal (#250)
B: Screw terminal
E: Solder terminal
2.
Contact Gap
None: 1 mm (F gap)
G:
0.5 mm (G gap)
6.
Barrier (Models with Thermoplastic Case Only)
3.
4.
Actuator
None: Pin plunger
1:
Short hinge lever
2:
Hinge lever
3:
Long hinge lever
4:
Simulated hinge lever
5:
Short hinge roller lever
6:
Hinge roller lever
25:
Stainless short hinge roller lever
26:
Stainless hinge roller lever
Contact Form
1: SPDT
2: SPST-NC
3: SPST-NO
R
Right-hand barrier
L
Left-hand barrier
None
Without barrier
7.
OF Max. (Pin Plunger)
6: 400 gf
5: 200 gf
4: 100 gf
8.
Special Purpose
T: Heat-resistive Model
M: Model with 2.9-inch mounting hole
63
V
V
Combination
General-purpose
Classification
Model
Ratings
Terminal
OF max. (pin plunger)
Shape (see note)
A
Thermolastic
plastic
case
Standard
model
Note:
C
B
E
200 gf
(1 96 N)
(1.96
V-21
21 A,
250 V
V-16
16 A,
250 V
Yes
Yes
Yes
Only
upon
request
Yes
V-11
11 A.
250 V
Yes
Yes
Yes
Yes
Only
upon
request
V-15
15 A,
250 V
Yes
Yes
Yes
Yes
Yes
Only
upon
request
Yes
V-10
10 A,
250 V
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Heat resistive
V-j-T
10 and
15 A,
250 V
Yes
Yes
Inch
screwmount
V-j-K
10 to
21 A,
250 V
Only upon
request
Only
upon
request
Thermosetting
case
Special
model
C2
100 gf
(0 98 N)
(0.98
A:
C2:
C:
B:
E:
Yes
Only upon
request
Only upon
request
With
b i
barrier
Approved
t d d
standards
Yes
Yes
Only
upon
request
Yes
UL, CSA,
VDE,
SEMKO
SEMKO,
DEMKO,
SETI,
KEMA,
NEMKO,
SEV
400 gf
(3 92 N)
(3.92
Only
upon
request
UL, CSA
Yes
Only
upon
request
UL, CSA
Only
upon
request
Only
upon
request
Solder/quick-connect terminal (#187)
Quick-connect terminal (#187)
Quick-connect terminal (#250)
Screw terminal
Solder terminal
Remarks
V-series Switch Selection Guide According to Rated Current and OF
Rated
a ed
currentt
0.1 A,
1A
5A
OF max. (pin plunger)
10 gf
D2MV-01,
D2MV-1
25 gf
50 gf
VX-01, D2MV-01,
D2MV-1
VX-01, D2MV-01,
D2MV-1
VX-5, K
VX-5
100 gf
200 gf
10 A,
11 A
V-10 (see note 1)
V-11
V-10 (see note 1)
V-11 (see note 2)
15 A,
16 A
V-15 (see note 1 and 2)
V-16 (see note 2)
V-15 (see note 1)
V-16
1. Heat resistive versions of asterisk marked models are available, which resist temperatures up to 150°C.
2. These models can be modified.
Features
D2MV: Switching ultra-minute loads
VX:
Highly reliable switching of minute loads
K:
Switching minute loads
V:
Switching high currents
64
V-15 (see note 1 and 2)
V-16 (see note 2)
V-21
21 A
Note:
400 gf
V
V
Specifications
Ratings
Ratings
Rated voltage
Non-inductive load
Resistive load
NC
21 A
16 A
15 A
11 A
10 A
Note:
Inductive laod
Lamp load
NO
NC
Inductive load
NO
NC
Motor load
NO
NC
250 VAC
21 A
3A
12 A
4A
8 VDC
21 A
5A
12 A
7A
30 VDC
14 A
5A
12 A
5A
125 VDC
0.6 A
0.1 A
0.6 A
0.1 A
250 VDC
0.3 A
0.05 A
0.3 A
0.05 A
250 VAC
16 A
2A
10 A
3A
8 VDC
16 A
4A
10 A
6A
30 VDC
10 A
4A
10 A
4A
125 VDC
0.6 A
0.1 A
0.6 A
0.1 A
250 VDC
0.3 A
0.05 A
0.3 A
0.05 A
250 VAC
15 A
2A
10 A
3A
8 VDC
15 A
4A
10 A
6A
30 VDC
10 A
4A
10 A
4A
125 VDC
0.6 A
0.1 A
0.6 A
0.1 A
250 VDC
0.3 A
0.05 A
0.3 A
0.05 A
250 VAC
11 A
1.5 A
6A
2A
8 VDC
11 A
3A
6A
3A
30 VDC
6A
3A
6A
3A
125 VDC
0.6 A
0.1 A
0.6 A
0.1 A
250 VDC
0.3 A
0.05 A
0.3 A
0.05 A
250 VAC
10 A
1.5 A
6A
2A
8 VDC
10 A
3A
6A
3A
30 VDC
6A
3A
6A
3A
125 VDC
0.6 A
0.1 A
0.6 A
0.1 A
250 VDC
0.3 A
0.05 A
0.3 A
0.05 A
NO
1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal
current values of models with a contact gap of 0.5 mm (gap G).
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
Contact Form
SPDT
SPST-NC
SPST-NO
NC
NC
NO
NO
COM
COM
COM
65
V
V
Characteristics
Operating speed
0.1 mm to 1 m/s (at pin plunger)
Operating frequency
Mechanical: 600 operations/min
Electrical: 60 operations/min
Insulation resistance
100 MΩ min. (at 500 VDC)
Contact resistance
15 mΩ max. (initial value)
Inrush current (NC/NO)
V-21: 50 A max., V-16: 40 A max., V-15: 36 A max., V-11: 24 V max., V-10: 24 A max.
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between non-continuous terminals
2,000 VAC (1,500 VAC for V-15 and V-10), 50/60 Hz for 1 min between each terminal and ground
Vibration resistance
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
Mechanical: 1,000 m/s2 min. (approx. 100G min.)
Malfunction: V-21/V-16/V-15: 300 m/s2 (approx. 30G min.)
V-11/V-10:
200 m/s2 (approx. 20G min.)
Life expectancy
Mechanical: 50,000,000 operations min.
Electrical: V-21/V-16/V-15: 100,000 operations min.
V-11/V-10:
300,000 operations min.
Ambient temperature
Operating: –25°C to 80°C (with no icing)
–25°C to 150°C for heat-resistive model
Ambient humidity
Operating: 85% max.
Contact
Specifications: Rivet
Materials:
V-21/V-16/V-15: Silver alloy
V-11/V-10:
Silver
Weight
Approx. 6.2 g
Note:
The operating speed value shown is for pin plunger models. For hinge lever models, this speed is for the plunger parts.
Approved Standards
UL (File No. E32667)/CSA (File No. LR21642)/
VDE (File No. 716)/SEMKO (File No. 9114062)
Operating Characteristics
Thermoplastic Case
Model
Pin plunger
V-21-1j6
Short hinge lever
V-16-1j5
V-161-1j5
V-111-1j4
OF max.
3.92 N (400 gf)
1.96 N (200 gf)
0.98 N (100 gf)
3.92 N (400 gf)
1.96 N (200 gf)
0.98 N (100 gf)
RF min.
0.78 N (80 gf)
0.49 N (50 gf)
0.20 N (20 gf)
0.49 N (50 gf)
0.49 N (50 gf)
0.15 N (15 gf)
PT max.
1.2 mm
1.6 mm
OT min.
1.0 mm
0.8 mm
MD max.
0.4 (0.3) mm (see note)
0.6 (0.5) mm (see note)
OP
14.7±0.4 mm
15.2±0.5 mm
Model
V-11-1j4
V-211-1j6
Hinge lever
Long hinge lever
V-212-1j6
V-162-1j5
OF max.
2.45 N (250 gf)
1.23 N (125 gf)
0.59 N (60 gf)
1.27 N (130 gf)
0.69 N (70 gf)
0.34 N (35 gf)
RF min.
0.25 N (25 gf)
0.14 N (14 gf)
0.06 N (6 gf)
0.12 N (12 gf)
0.06 N (6 gf)
---
PT max.
4.0 mm
9.0 mm
OT min.
1.6 mm
2.0 mm
MD max.
1.5 (0.8) mm (see note)
2.8 (2.0) mm (see note)
OP
15.2±1.2 mm
15.2+2.6/–3.2 mm
Model
V-112-1j4
V-213-1j6
Simulated hinge lever
V-163-1j5
15.2±2.6 mm
Short hinge roller lever
V-214-1j6
V-164-1j5
OF max.
2.45 N (250 gf)
1.23 N (125 gf)
RF min.
0.25 N (25 gf)
0.14 N (14 gf)
PT max.
4.0 mm
1.6 mm
OT min.
1.6 mm
0.8 mm
MD max.
1.5 (0.8) mm (see note)
0.6 (0.5) mm (see note)
OP
18.7±1.2 mm
20.7±0.6 mm
Note:
66
V-113-1j4
V-114-1j4
V-215-1j6
V-165-1j5
V-115-1j4
0.59 N (60 gf)
4.71 N (480 gf)
2.35 N (240 gf)
1.18 N (120 gf)
0.06 N (6 gf)
0.49 N (50 gf)
0.49 N (50 gf)
0.15 N (15 gf)
The value in the parentheses indicates the G gap.
V
V
Model
Hinge roller lever
V-216-1j6
V-166-1j5
OF max.
2.45 N (250 gf)
1.23 N (125 gf)
0.59 N (60 gf)
RF min.
0.25 N (25 gf)
0.14 N (14 gf)
0.06 N (6 gf)
PT max.
4.0 mm
OT min.
1.6 mm
MD max.
1.5 (0.8) mm (see note)
OP
20.7±1.2 mm
Note:
V-116-1j4
The value in the parentheses indicates the G gap.
Thermoplastic Case (V-15/-10 Models)
Model
Pin plunger
V-15-1j5
V-10-1j5
Short hinge lever
V-10-1j4
Hinge lever
V-151-1j5
V-101-1j5
V-101-1j4
V-152-1j5
V-102-1j5
V-102-1j4
OF max.
1.96 N (200 gf)
0.98 N (100 gf)
1.96 N (200 gf)
0.98 N (100 gf)
1.23 N (125 gf)
0.59 N (60 gf)
RF min.
0.49 N (50 gf)
0.20 N (20 gf)
0.49 N (50 gf)
0.15 N (15 gf)
0.14 N (14 gf)
0.06 N (6 gf)
PT max.
1.2 mm
1.6 mm
4 mm
OT min.
1.0 mm
0.8 mm
1.6 mm
MD max.
0.4 (0.3) mm (see note)
0.6 (0.5) mm (see note)
1.5 (0.8) mm (see note)
OP
14.7±0.4 mm
15.2±0.5 mm
15.2±1.2 mm
Model
Long hinge lever
V-153-1j5
V-103-1j5
Simulated hinge lever
V-103-1j4
V-154-1j5
V-104-1j5
V-104-1j4
Short hinge roller lever
V-155-1j5
V-105-1j5
V-105-1j4
OF max.
0.69 N (70 gf)
0.34 N (35 gf)
1.23 N (125 gf)
0.59 N (60 gf)
2.35 N (240 gf)
1.18 N (120 gf)
RF min.
0.06 N (6 gf)
---
0.14 N (14 gf)
0.06 N (6 gf)
0.49 N (50 gf)
0.15 N (15 gf)
PT max.
9.0 mm
4.0 mm
1.6 mm
OT min.
2.0 mm
1.6 mm
0.8 mm
MD max.
2.8 (2.0) mm (see note)
1.5 (0.8) mm (see note)
0.6 (0.5) mm (see note)
OP
15.2+2.6/–3.2 mm
18.7±1.2 mm
20.7±0.6 mm
Model
15.2±2.6 mm
Hinge roller lever
V-156-1j5
V-106-1j5
V-106-1j4
OF max.
1.23 N (125 gf)
0.59 N (60 gf)
RF min.
0.14 N (14 gf)
0.06 N (6 gf)
PT max.
4.0 mm
OT min.
1.6 mm
MD max.
1.5 (0.8) mm (see note)
OP
20.7±1.2 mm
Note:
The value in the parentheses indicates the G gap.
67
V
V
Engineering Data
V-21/-16/-15
200
V10 (100 g) V11
100
50
V-10 (200 g)
V-15
V-16
V-21
10
0.01
0
0.2 0.4
Full stroke
OT rated value
5
V-11/-10
3
Number of operations (x10
)
Without load
Operating frequency: 600 operations/min
3
Number of operations (x10
)
Electrical Life Expectancy
V-21/-16/-15/-11/-10
6
Number of operations (x10
)
Mechanical Life Expectancy
Operating frequency: 60 operations/min
cosφ = 1 250 VAC
2
1
0.5
V-21
0.3
V-15
V-16
0.1
0
0.6 0.8 1.0 1.2 1.4 (1.6) 1.8
4
8
OT (mm)
12
16
20
24
5
Operating frequency: 60 operations/min
cosφ = 1 250 VAC
2
1
0.5
0.3
V-10
V-11
0.1
0
28
Switching current (A)
0.5 1 2 3 4 5 6 7 8 9 10 11 12
Switching current (A)
Dimensions
Note:
1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
3. The following illustrations and drawings are for #250-series models with tab terminals (terminals C). V models with a switching
current of 16 A or 11 A incorporates terminals A and C2. These models are different from #250-series models in terminal size only.
Terminals A, C2, and side terminals are omitted from the following drawings. Refer to Kinds of “Terminals” on page 72 for these
terminals.
Pin Plunger
(Without Barrier)
V-21-1j6
V-16-1j5
V-11-1j4
20.2±0.25
1.6
PT
+0.13
3.1 –0.03 dia. holes
4.2
0.6
2.8
2.8
2.8
2.8
OP
8.4
10.3±0.1
15.9 19.1
+0.13
3.1 –0.03
3.4±0.15 dia.
22.2±0.1 2.8 (12.0)
27.8
Three, #250 (t0.8)
quick connect terminal
10.3
39.8±0.8
(With Right-hand Barrier)
V-21-1jR6
V-16-1jR5
20.2±0.25
+0.13
3.1 –0.03 dia. holes
PT
2.8
4.2
1.6
0.6
2.8
2.8
2.8
OP
8.4
10.3±0.1
15.9
19.1
21.9
3.1 +0.13
–0.03
0.6
3.4±0.15 dia.
22.2±0.1 2.8
27.8
39.8±0.8
40.2
68
(12.0)
Three, #250 (t0.8)
quick connect terminal
10.3
V
V
(With Left-hand Barrier)
+0.13
V-21-1jL6
V-16-1jL5
3.1 –0.03 dia. holes
1.6
4.2
2.8
20.2±0.25
2.8
2.8
0.6
PT
2.8
19.1
21.9
8.4
15.9
10.3±0.1
OP
3.1 +0.13
–0.03
3.4±0.15 dia.
0.6
Three, #250 (t0.8)
quick connect terminal
(12.0) 2.8 22.2±0.1
27.8
10.3
39.8±0.8
40.2
Short Hinge Lever
V-211-1j6
V-161-1j5
V-111-1j4
22.1
t = 0.5
(see
note)
PT
2.8
8.1
4.3
+0.13
1.6
3.1 –0.03 dia. holes
0.6
2.8
2.8
OP
10.3±0.1
8.4
15.9
19.1
+0.13
3.1 –0.03
3.4±0.15 dia.
Three, #250 (t0.8)
10.3
quick connect terminal
22.2±0.1 2.8 (12.0)
27.8
Note:
Stainless steel lever
39.8±0.8
Hinge Lever
V-212-1j6
V-162-1j5
V-112-1j4
35.6±0.8
8.1
t = 0.5
(see note)
PT
2.8
1.6
+0.13
3.1 –0.03 dia. holes
4.3
0.6
2.8
OP
8.4
10.3±0.1
15.9
2.8
19.1
+0.13
3.1 –0.03
3.4±0.15 dia.
22.2±0.1
(12..0)
2.8
27.8
Three, #250 (t0.8)
quick connect terminal
Note:
39.8±0.8
Long Hinge Lever
V-213-1j6
V-163-1j5
V-113-1j4
10.3
Stainless steel lever
59.4±0.8
PT
2.8
+0.13
3.1 –0.03 dia. holes
t = 0.5 (see note)
OP
8.4 15.9
10.3±0.1
4.3
0.6
2.8
2.8
19.1
3.1 +0.13
–0.03
Three, #250 (t0.8)
quick connect terminal
3.4±0.15 dia.
22.2±0.1 2.8
27.8
10.3
(12.0)
Note:
Stainless steel lever
39.8±0.8
Simulated Hinge Lever
V-214-1j6
V-164-1j5
V-114-1j4
32.6±0.8
PT
OP
3.5R
t = 0.5
(see note)
8.1
1.6
+0.13
3.1 –0.03 dia. holes
4.3
2.8
0.6
2.8
10.3±0.1
3.1 +0.13
–0.03
3.4±0.15 dia.
Three, #250 (t0.8)
quick connect terminal
22.2±0.1 2.8
27.8
10.3
(12.0)
Note:
Stainless steel lever
39.8+0.8
69
V
V
Short Hinge Roller Lever
V-215-1j6
V-165-1j5
V-115-1j4
20.1
t = 0.5
(see 8.1
note 1)
PT
1.6
5.1
0.6
3.1 +0.13
–0.03 dia. holes
4.8 × 4.8 dia.
(see note 2)
2.8
2.8
OP
8.4 15.9
10.3±0.1
19.1
3.1 +0.13
–0.03
3.4±0.15 dia.
22.2±0.1
27.8
2.8
(12.0)
Three, #250 (t0.8)
quick connect terminal
10.3
Note:
1. Stainless steel lever
2. Polyacetar resin roller
39.8±0.8
Hinge Roller Lever
34.0±0.8
V-216-1j6
V-166-1j5
V-116-1j4
PT
t = 0.5
(see note 1)
8.1
1.6
5.1
3.1 +0.13
–0.03 dia. holes
0.6
4.8 × 4.8 dia.
(see note 2)
2.8
OP 2.8
10.3±0.1
8.4
15.9 19.1
3.1 +0.13
–0.03
3.4±0.15 dia.
22.2±0.1
2.8
27.8
10.3
Three, #250 (t0.8)
(12.0) quick connect terminal
Note:
1. Stainless steel lever
2. Polyacetar resin roller
39.8±0.8
Thermoplastic Case (V-15/-10 Models)
The following illustration and drawing are for #187-series models with solder and tab terminals (terminals A). V models with a switching current
of 15 A or 10 A incorporates terminals B, C2, and E. These models are different from #250-series models in terminal size only. Terminals B, C2,
E, and side terminals are omitted from the following drawing. Refer to page 72 for these terminals.
Pin Plunger
V-15-1j5
V-10-1j5
V-10-1j4
20.2±0.25
4.2
PT
2.8
2.8
3.1 +0.13
–0.03 dia. holes
2.8
OP
10.3±0.1
15.9 18.8
+0.13
3.1 –0.03
3.4±0.15 dia.
22.2±0.1
27.8
2.8
(10)
Three, #187 (t0.5)
solder/quick connect
terminal
10.3
37.8±0.8
Short Hinge Lever
V-151-1j5
V-101-1j5
V-101-1j4
t = 0.5 (see note)
22.1
PT
4.3 2.8
+0.13
3.1 –0.03 dia. holes
8.1
2.8
OP
10.3±0.1
15.9
18.8
+0.13
3.1 –0.03
3.4±0.15 dia.
22.2±0.1
27.8
37.8±0.8
70
2.8
(10)
10.3
Three, #187 (t0.5)
solder/quick connect
terminal
Note:
Stainless steel lever
V
V
Hinge Lever
V-152-1j5
V-102-1j5
V-102-1j4
t = 0.5 (see note)
35.6±0.8
+0.13
3.1 –0.03 dia. holes
PT
4.3
2.8
8.1
2.8
OP
10.3±0.1
15.9
18.8
+0.13
3.1 –0.03
3.4±0.15 dia.
22.2±0.1
2.8
27.8
10.3
Three, #187 (t0.5)
solder/quick connect
terminal
(10)
Note:
Stainless steel lever
Note:
Stainless steel lever
Note:
Stainless steel lever
37.8±0.8
Long Hinge Lever
V-153-1j5
V-103-1j5
V-103-1j4
t = 0.5 (see note)
59.4±0.8
8.1
PT
OP
2.8
+0.13
3.1 –0.03 dia. holes
4.3
2.8
10.3±0.1
15.9 18.8
+0.13
3.1 –0.03
2.8
3.4±0.15 dia.
22.2±0.1
27.8
(10)
10.3
Three, #187 (t0.5)
solder/quick connect
terminal
37.8±0.8
Simulated Hinge Lever
V-154-1j5
V-104-1j5
V-104-1j4
3.5R
t = 0.5 (see note)
4.3
+0.13
32.6±0.8
PT
3.1 –0.03 dia. holes
8.1
OP
2.8
2.8
10.3±0.1
15.9 18.8
+0.13
3.1 –0.03
2.8
10.3
3.4±0.15 dia.
22.2±0.1
27.8
(10)
Three, #187 (t0.5)
solder/quick connect
terminal
37.8±0.8
Short Hinge Roller Lever
V-155-1j5
V-105-1j5
V-105-1j4
4.8 × 4.8 dia. (see note 2)
t = 0.5 (see note 1)
20.1
PT
8.1
OP
+0.13
3.1 –0.03
5.1
dia. holes
2.8
10.3±0.1
15.9 18.8
3.1 +0.13
–0.03
2.8
3.4±0.15 dia.
22.2±0.1
27.8
(10)
10.3
Three, #187 (t0.5)
solder/quick connect
terminal
Note:
Hinge Roller Lever
V-156-1j5
V-106-1j5
V-106-1j4
4.8 × 4.8 dia. (see note 2)
t = 0.5 (see note 1)
34.0±0.8
PT
+0.13
8.1
OP
1. Stainless steel lever
2. Polyacetar resin roller
37.8±0.8
5.1
3.1 –0.03 dia. holes
2.8
10.3±0.1
15.9 18.8
+0.13
3.1 –0.03
2.8
3.4±0.15 dia.
22.2±0.1
27.8
(10)
10.3
Three, #187 (t0.5)
solder/quick connect
terminal
Note:
1. Stainless steel lever
2. Polyacetar resin roller
37.8±0.8
71
V
V
Terminals
Solder/Quick-connect (#187)
Terminal (A)
Quick-connect (#187)
Terminal (C2)
Quick-connect (#250)
Terminal (C)
(5.5)
(5.5)
(4.9)
(6.5)
(6.5)
(7.7)
2.9
2.9
3.2
(10)
(10)
t = 0.5
Three, #187 quick
connect terminal
t = 0.5
Three, #187 solder or
quick connect terminal
(12.0)
t = 0.8
Three, #250 quick
connect terminal
8
6.35
3.2
6.35
3.2 (see note)
4.75±0.1
Note:
4.75±0.1
2.4 dia. 1.6 dia.
Indicates the length to the center of the
1.6 dia. holes
1.6 dia. terminal hole
3.95
6.35±0.1
1.65 dia. terminal hole
Bottom Terminal
Solder Terminal (E)
Screw Terminal (B)
Three, #M3 x 0.5 x 3.2
Phillips screw washer
Three, 2.35 dia. terminal holes
(5.5)
(6.5)
3.1
3.1
t = 0.8
(7)
t = 0.8
(7)
Precautions
Mounting
Separator
Use two M3 mounting screws with an appropriate screwdriver to
mount the switch. Tighten the screws to a torque of 4 to 6 kg S cm
(0.39 to 0.59 N S m).
When mounting a switch, check the insulation distance between the
switch and the mounting plate. If the distance is not enough, mount
the switch with an insulation guard or separator or use a switch that
incorporates an insulation guard. Especially, when mounting a
switch to a metal object, be sure to use an insulation guard or separator.
Mountintg Holes
Two, 3.1 dia. mounting holes or
M3 screw holes
10.3 ± 0.1
22.2 ± 0.1
When soldering a lead wire to a terminal of the V, use a soldering
iron with a maximum capacity of 60 W and do not take more than 5 s
to solder the lead wire, otherwise the characteristics of the V may be
altered.
Operation
Insatll the pin plunger switch so that the operating force is applied in
alignment with the stroke of the actuator. The switch should be set
so that is stroke is in the range of 60 to 90% of the rated OT (minimum value) when the switch has been operated.
72
V
V
Connector
If the user has difficulty using a conventional connector due to the
following reasons, use of AMP’s Positive Lock Connector or Nippon
Tanshi’s Firm Lock Connector are recommended.
•
•
•
Difficult to conduct work due to large insertion force.
Damage to the switch results due to large insertion force.
The connector is disconnected with ease when the wires are
pulled.
Nippon Tanshi’s Firm Lock Connector
Sensitive lever
Lock
Lock hole
Conductor
press-fit part
Sheath press-fit
part
Lock Mechanism (Nippon Tanshi’s Firm Lock Connector)
Insertion
Locked
The sensitive lever goes down
when the tab is inserted.
After the tab is inserted, the sensitive
lever returns to the previous position
and the tab is locked.
Tab
Lock
Extraction
Extraction Completed
Hold the housing and pull the tab so that
the tip of the sensitive lever touches the
slant wall and the tab is unlocked.
After the tab is extracted, the sensitive
lever returns to the normal position due
to the spring force of the sensitive lever.
Slope
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. B10-E1-8A
73