FERRITE CERAMICS DATA SHEET RM12/I RM cores and accessories Product specification Supersedes data of November 1997 File under Ferrite Ceramics, MA01 1999 Dec 23 Philips Components Product specification RM cores and accessories RM12/I CORE SETS Effective core parameters SYMBOL PARAMETER handbook, halfpage VALUE 0 29.8 1.1 UNIT Σ(I/A) core factor (C1) 0.388 mm−1 Ve effective volume 8340 mm3 Ie effective length 56.6 mm Ae effective area 146 mm2 Amin minimum area 125 mm2 m mass of set ≈45 g 16.1 0 5 0.5 12.9 0 37.4 1.3 ,,,, ,,,, ,,,, ,,,, 0 O 12.8 0.4 21.6 0.25 0.6 24.5 16.8 0 0.1 1 O 25 0 MGC103 Dimensions in mm. Fig.1 RM12/I core set. Core sets for general purpose transformers and power applications Clamping force for AL measurements, 70 ±20 N. GRADE 3C90 µe 160 ±3% ≈49 ≈1400 RM12/I-3C90-A160 250 ±3% ≈77 ≈800 RM12/I-3C90-A250 315 ±5% ≈97 ≈550 RM12/I-3C90-A315 400 ±5% ≈123 ≈450 RM12/I-3C90-A400 RM12/I-3C90-A630 630 ±5% ≈196 ≈300 ≈0 160 ±3% ≈49 ≈1400 RM12/I-3C94-A160 250 ±3% ≈77 ≈800 RM12/I-3C94-A250 315 ±5% ≈97 ≈550 RM12/I-3C94-A315 400 ±5% ≈123 ≈450 RM12/I-3C94-A400 RM12/I-3C94-A630 630 ±5% 3C96 1999 Dec 23 TYPE NUMBER ≈1910 6200 ±25% 3C94 AIR GAP (µm) AL (nH) RM12/I-3C90 ≈196 ≈300 6200 ±25% ≈1910 ≈0 RM12/I-3C94 5500 ±25% ≈1510 ≈0 RM12/I-3C96 2 Philips Components Product specification RM cores and accessories GRADE 3F3 RM12/I AL (nH) µe 160 ±3% ≈49 AIR GAP (µm) TYPE NUMBER ≈1400 RM12/I-3F3-A160 250 ±3% ≈77 ≈800 RM12/I-3F3-A250 315 ±5% ≈97 ≈550 RM12/I-3F3-A315 400 ±5% ≈123 ≈450 RM12/I-3F3-A400 ≈196 ≈300 RM12/I-3F3-A630 ≈1560 ≈0 630 ±5% 5050 ±25% RM12/I-3F3 Properties of core sets under power conditions B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T = 100 °C f = 25 kHz; ˆ = 200 mT; B T = 100 °C f = 100 kHz; ˆ = 100 mT; B T = 100 °C f = 100 kHz; ˆ = 200 mT; B T = 100 °C f = 400 kHz; ˆ = 50 mT; B T = 100 °C 3C90 ≥315 ≤1.00 ≤1.06 − − 3C94 ≥315 − ≤0.8 ≈3.5 ≈1.8 3C96 ≥320 − ≈0.55 ≈2.5 ≈1.3 3F3 ≥315 − ≤0.92 − ≤1.60 GRADE 1999 Dec 23 3 Philips Components Product specification RM cores and accessories RM12/I COIL FORMER General data PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass-reinforced, flame retardant in accordance with UL 94V-0; UL file number E45329(R) Pin material copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated Maximum operating temperature 155 °C, IEC 60085 class F Resistance to soldering heat “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 16.5 0 −0.2 5.08 5.08 5.08 5.08 3.7 0 −0.1 (14.3 min.) 1.2 0.7 5.08 3.2 2.54 0.3 0.05 handbook, full pagewidth 1.3 +0.15 0 33.0216.5 13 +0.2 0 26 38.4 ∅24.7 0 ∅14.5 0 −0.2 −0.2 ∅1 3.4 3 4.8 1.6 +0.15 0 CBW533 28.4 Dimensions in mm. Fig.2 RM12/I coil former (DIL). Winding data for RM12/I coil former (DIL) NUMBER OF SECTIONS AVERAGE LENGTH OF TURN (mm) WINDING AREA (mm2) WINDING WIDTH (mm) 1 61 75.0 14.3 1999 Dec 23 4 TYPE NUMBER CPV-RM12/I-1S-12PD Philips Components Product specification RM cores and accessories RM12/I MOUNTING PARTS General data ITEM Clamping force ≈35 N Clip material stainless steel Clip plating tin-lead alloy (SnPb) Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 Type number 4.5 SPECIFICATION olumns 23.7 R 55 20.4 CLI/P-RM12/I 5.3 CBW532 0.9 Dimensions in mm. Fig.3 Mounting clip for RM12/I. 1999 Dec 23 5