MICROCIRCUIT DATA SHEET Original Creation Date: 08/05/98 Last Update Date: 02/24/99 Last Major Revision Date: 11/12/98 MNCLC409A-X REV 0A0 VERY WIDEBAND, LOW DISTORTION MONOLITHIC OP AMP General Description The CLC409 is a very wideband, DC coupled monolithic operational amplifier designed specifically for wide dynamic range systems requiring exceptional signal fidelity. Benefiting from Comlinear's current feedback architecture, the CLC409 offers a gain range of +1 to +10 while providing stable, oscillation free operation without external compensation, even at unity gain. With its 350MHz small signal bandwidth (Vout = 2Vpp), 10-bit distortion levels through 20MHz (Rl = 100Ohms), 8-bit distortion levels through 60Mhz, 2.2nV/SqRtHz input referred noise and 13.5mA supply current, the CLC409 is the ideal driver or buffer for high speed flash A/D and D/A converters. Wide dynamic range systems such as radar and communication receivers requiring a wideband amplifier offering exceptional signal purity will find the CLC409's low input referred noise and low harmonic and intermodulation distortion make it an attractive high speed solution. Industry Part Number NS Part Numbers CLC409A CLC409AE-QML** CLC409AJ-QML* Prime Die UB1927B Controlling Document 5962-9203401MPA*, M2A** Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Features - 350MHz small signal bandwidth -65/-72dBc 2nd/3rd harmonics (20MHz) Low Noise 8ns settling to 0.1% 1200V/us slew rate 13.5mA supply current (+5V) 70mA output current Applications - Flash A/D driver D/A transimpedance buffer Wide dynamic range IF amp Radar/communication receivers DDS post-amps Wideband inverting summer Line driver 2 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) +7V dc Common Mode Input Voltage (Vcm) +Vcc Differential Input Voltage +10V dc Output Current (Io) +70mA Power Dissipation (Pd) (Note 2) 1.2W Junction Temperature (Tj) +175 C Lead Temperature (soldering, 10 seconds) +300 C Storage Temperature Range -65 C to +125 C Thermal Resistance ThetaJA (Junction to Ambient) CERAMIC DIP (Still Air) (500 LFPM) LCC (Still Air) (500 LFPM) ThetaJC (Junction to Case) CERAMIC DIP LCC Package Weight (Typical) CERAMIC DIP LCC ESD Tolerance (Note 3) ESD Rating Note 1: Note 2: Note 3: 132 77 97 67 C/W C/W C/W C/W 26 C/W 27 C/W 1070 mg 465 mg 500 V Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance, and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. Human body model, 1.5K Ohms in series with 100pF. 3 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Recommended Operating Conditions Supply Voltage (Vcc) +5V dc Gain Range +1 to +10 Ambient Operating Temperature Range (Ta) -55 C to +125 C 4 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Electrical Characteristics AC/DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL Ibn DIbn Ibi DIbi Vio DVio PARAMETER Input Bias Current, Average Temperature Coefficient, Noninverting Input Bias Current, Average Temperature Coefficient, Inverting PSRR Power Supply Rejection Ratio +Io Output Current -Vo Output Voltage Range Output Voltage Range 5 MAX UNIT SUBGROUPS uA 1, 2 -44 +44 uA 3 1 -125 +125 nA/C 2 1 -275 +275 nA/C 3 -20 +20 uA 1 -30 +30 uA 2 -36 +36 uA 3 1 -100 +100 nA/C 2 1 -200 +200 nA/C 3 -4.5 +4.5 mV 1 -9.5 +9.5 mV 2 -8.5 +8.5 mV 3 1 -50 +50 uV/C 2 1 -50 +50 uV/C 3 14.2 mA 1, 2, 3 45 dB 1, 2, 3 1 +50 mA 1, 2 1 +36 mA 3 -Vcc = -4.5V to -5.0V, +Vcc = +4.5V to +5.0V Output Current MIN +22 Input Offset Voltage Input Offset Voltage, Average Temperature Coefficient PINNAME -22 Input Bias Current, Inverting Supply Current, no load +Vo NOTES Input Bias Current, Noninverting Icc -Io CONDITIONS 1 -50 mA 1, 2 1 -36 mA 3 1 +3.2 V 1, 2 1 +3.0 V 3 1 -3.2 V 1, 2 1 -3.0 V 3 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Electrical Characteristics AC/DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL Rin PARAMETER CONDITIONS NOTES Noninverting Input Resistance PINNAME MIN MAX UNIT SUBGROUPS 1 500 KOhms 1 1 1000 KOhms 2 1 250 KOhms 3 Cin Noninverting Input Capacitance 1 2 pF 4, 5, 6 Ro Output Impedance 1 0.2 Ohms 1, 2 1 0.3 Ohms 3 CMRR Common Mode Rejection Ratio Vcm = +1.0V 1 45 dB 4, 5, 6 SSBW Small Signal Bandwidth -3dB bandwidth, Vout < 2Vpp 1 250 MHz 4, 6 1 200 MHz 5 1 90 MHz 4, 6 1 80 MHz 5 0.4 dB 4 0.4 dB 5, 6 0.8 dB 4 0.8 dB 5, 6 1.0 dB 4 1.0 dB 5, 6 2.2 dB 4 2 3.0 dB 5 2 2.0 dB 6 1 0.8 Degre 4, 6 e 1 1.0 Degre 5 e 1 .06 % 4, 5 1 .07 % 6 1 .02 Degre 4, 5, e 6 -52 dBc 4 -52 dBc 5, 6 LSBW GFPL Large Signal Bandwidth Gain Flatness Peaking -3dB bandwidth, Vout < 5Vpp 0.1MHz to 75MHz, Vout < 0.5Vpp 2 GFPH Gain Flatness Peaking > 75MHz, Vout < 0.5Vpp 2 GFR1 Gain Flatness Rolloff 0.1MHz to 125MHz 2 GFR2 LPD DG Gain Flatness Rolloff Linear Phase Deviation Differential Gain At 200MHz .01MHz to 100MHz Rl = 150 Ohms, 3.58MHz, 4.43MHz DP Differential Phase Rl = 150 Ohms, 3.58MHz, 4.43MHz HD2 2nd Harmonic Distortion 2Vpp at 20MHz 2 6 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Electrical Characteristics AC/DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL HD2L HD2H HD3 PARAMETER 2nd Harmonic Distortion 2nd Harmonic Distortion 3rd Harmonic Distortion CONDITIONS NOTES 2Vpp at 5MHz 2Vpp at 60MHz PINNAME MIN MAX UNIT SUBGROUPS 1 -81 dBc 4, 5 1 -78 dBc 6 1 -44 dBc 4, 5 1 -41 dBc 6 -65 dBc 4 2 -65 dBc 5, 6 2Vpp at 20MHz HD3L 3rd Harmonic Distortion 2Vpp at 5MHz 1 -76 dBc 4, 5, 6 HD3H 3rd Harmonic Distortion 2Vpp at 60MHz 1 -52 dBc 4, 5, 6 Trs Rise and Fall Time 2V step, Cl < 10pF, measured between 10% and 90% points 1 1.6 ns 9, 10, 11 Trl Rise and Fall Time 5V step, Cl < 10pF, measured between 10% and 90% points 1 4.2 ns 9, 11 1 4.6 ns 10 Ts Settling Time Cl < 10pF, 2V step at 0.1% of the final value 1 12 ns 9, 10, 11 OS Overshoot 2V step, Cl < 10pF 1 18 % 9, 10 1 15 % 11 SR Slew Rate Vout = 4V step, Cl < 10pF, measured at +1V 1 VN Equivalent Input Noise, Noninverting Voltage > 1MHz 1 2.8 nV/Sq 4, 6 Rt 1 3.1 nV/Sq 5 Rt Equivalent Input Noise, Inverting Current > 1MHz 1 18 pA/Sq 4, 6 Rt 1 20 pA/Sq 5 Rt 1 4.0 pA/Sq 4, 6 Rt 1 4.5 pA/Sq 5 Rt 1 -155 dBm 1Hz 4, 6 1 -154 dBm 1Hz 5 ICN NCN SNF Equivalent Input Noise, Noninverting Current > 1MHz Equivalent Input Noise, Total Noise Floor > 1MHz 7 1000 V/us 4, 5, 6 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Electrical Characteristics AC/DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL INV PARAMETER Equivalent Input Noise, Total Integrated Noise Note 1: Note 2: Note 3: CONDITIONS NOTES 1MHz to 150MHz PINNAME MIN MAX UNIT 1 47 uV 4, 6 1 52 uV 5 Guaranteed, if not tested. This parameter is group A sample tested only and is excluded from final electrical testing, but is guaranteed to the limits specified. The algebraic convention, whereby the most negative value is a minimum and most positive is a maximum, is used in this table. Negative current shall be defined as convential current flow out of a device terminal. 8 SUBGROUPS MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Graphics and Diagrams GRAPHICS# DESCRIPTION 07077HRA2 CERDIP (J), 8 LEAD (B/I CKT) 07086HRA2 LCC (E), TYPE C, 20 TERMINAL (B/I CKT) E20ARE LCC (E), TYPE C, 20 TERMINAL(P/P DWG) J08ARL CERDIP (J), 8 LEAD (P/P DWG) P000406A CERDIP (J), 8 LEAD (PINOUT) P000446A LCC (E), TYPE C, 20 TERMINAL (PINOUT) See attached graphics following this page. 9 N/C 1 8 N/C VINV 2 7 +VCC 3 6 VOUT 4 5 N/C VNON-INV -VCC CLC409J 8 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000406A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 N/C VNON-INV N/C -VCC 4 N/C 3 2 1 VINV N/C 20 19 18 N/C 5 17 N/C N/C 6 16 N/C N/C 7 15 N/C N/C 8 14 VCC 9 10 11 12 13 N/C N/C N/C Vout N/C CLC409E 20 - LEAD LCC CONNECTION DIAGRAM TOP VIEW P000446A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0 Revision History Rev ECN # 0A0 M0003257 02/24/99 Rel Date Originator Changes Shaw Mead Initial MDS Release 10