MICROCIRCUIT DATA SHEET Original Creation Date: 09/18/95 Last Update Date: 09/19/95 Last Major Revision Date: 09/18/95 MDDH0008H REV 0AL ELEMENTAL DH0008H RELAY DRIVER Industry Part Number NS Part Numbers DH0008 DH0008H/883 Prime Die DH0008 Controlling Document DESC Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MDDH0008H REV 0AL Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = 45V SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS Vohh Logical "1" Output Voltage Iout = 1.6A 43 V 1 Vohl Logical "1" Output Voltage Vcc = 10V, Iout = 800mA 8.5 V 1, 2, 3 Iil Logical "0" Input Current Vin = .4V -1 -.1 mA 1, 2, 3 Iihl Logical "1" Input Current Vin = 2.4V -5 5 uA 1, 2, 3 Iihh Logical "1" Input Current Vin = 5.5V -100 100 uA 1 -25 25 uA 2, 3 Vol Logical "0" Output Voltage Vin = .8V, Rl = 1K Ohm 100 mV 1, 2, 3 Icch On Power Supply Current Vin = 2V 8 mA 1, 2, 3 Iccl Off Power Supply Current Vin = .8V 2 mA 1, 2, 3 VNand Nand Output Leakage (Pin 1 to 8) Vin = 0V 40 mV 1, 2, 3 I 5-6-7 Isolation Leakage (Pins 5, 6, 7) 100 uA 1 2