MILITARY DATA SHEET Original Creation Date: 07/07/95 Last Update Date: 07/07/95 Last Major Revision Date: 07/07/95 MNLM133-X REV 0AL 3-AMP ADJUSTABLE NEGATIVE REGULATOR Industry Part Number NS Part Numbers LM133 LM133K/883 Prime Die LM133 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLM133-X REV 0AL Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Il = .8mA, Vout = Vref SYMBOL Vref PARAMETER Reference Voltage CONDITIONS NOTES MAX 1.238 1.262 V 1 1.225 1.275 V 2, 3 1.238 1.262 V 1 1.225 1.275 V 2, 3 Vout = -1.7V, Vin = -4.25V .27 2.5 mA 1, 2, 3 Vin = -4.25V to -11.75V, Vout = -1.7V .27 2.5 mA 1, 2, 3 Max |Vin -Vout| = 35V, Vout = 1.7V .27 2.5 mA 1 1.3 5 mA 2, 3 3V < |Vin -Vout| < 35V -8 8 mV 1 3V < |Vin -Vout| < 35V -10 +10 mV 2, 3 Vin = -6.25V, 8mA < IL < 3A -6.2 6.2 mV 1 Vin = -6.25V, 8mA < IL < 3A -12.5 12.5 mV 2, 3 Vin = -12.2V, 8mA < Il < 3A -6.2 6.2 mV 1 Vin = -12.2V, 8mA < Il < 3A -12.5 12.5 mV 2, 3 Max |Vin -Vout| = 35V, 8mA < Il < .15A -6.2 6.2 mV 1 Max |Vin -Vout| = 35V, 8mA < Il < .15A -12.5 12.5 mV 2, 3 Max |Vin -Vout| = 35V 50 90 uA 1 50 100 uA 2, 3 50 90 uA 1 50 100 uA 2, 3 Vin = -4.25V Rline Rload Iadj Minimum Load Current Line Regulation Load Regulation Adjust Pin Current Vin = -4.25V UNIT SUBGROUPS MIN Max |Vin -Vout| = 35V Iq PINNAME Delta Iadj Adjust Pin Current Change: Change vs Line Voltage 3V < |Vin -Vout| < 35V -5 5 uA 1 Delta Iadj Adjust Pin Current Change: Change vs Load Current Vin = -6.5V, 8mA < Il < 3A -5 5 uA 1 Theta R Thermal Regulation Vin = -12.2V, Il = 3A, t = 10mS -4.1 4.1 mV 1 Vin = -12.2V, Il = 8mA, t= 10mS -4.1 4.1 mV 1 2 MILITARY DATA SHEET MNLM133-X REV 0AL Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Il = .8mA, Vout = Vref SYMBOL PARAMETER Isc Short Circuit Current CONDITIONS NOTES PINNAME Max |Vin -Vout| = 35V Vout Output Voltage Rr Ripple Rejection Note 1: Note 2: UNIT SUBGROUPS 1.7 A 1 .15 1.5 A 2, 3 .3 2.2 A 1 .3 2.5 A 2, 3 1.25 4.5 A 1 1.25 5 A 2, 3 Vin = -12.25V 2.8 6 A 1, 2, 3 12.25V < |Vin -Vout| < 35V .15 5.85 A 1, 2, 3 Vin = -5V 3 6 A 1, 2, 3 1.23 1.27 V 1 dB 1 Vin = -21.2V Short Circuit Current MAX .15 Vin = -31.2V Delta Isc Isc MIN Cadj = 10uF, Vout = 10V, f = 120Hz 1, 2 Bench test, use 70256667. Ripple Rejection testing required 100% at 25C, Group A at 25C. 3 66