Electronic control gear QUICKTRONIC® PROFESSIONAL, two-lamp version QTP 2x36/230-240 Page 1 h h b l a b Reference : QTP 2x36/230-240 for lamp : 2x L 36 (L 38) Mains voltage [V] : 230/240 Permissible voltage fluctuations [V] : 198 - 264 Permissible battery voltage [V] : 154 - 276 Lamp start : Warm start within 2 s Mains frequency [Hz] : 0/50 - 60 Operating frequency [kHz] : 30 Mains current at 230 V/240 V/ A : 0,31 Power factor [c] : approx. 0,98 System wattage at 230 V/240 V [W] : 70 (70) Lamp wattage at 230 V/240 V [W] : 64 (64) Luminous flux [lm] : 2 x 3200 Temperature range [°C] : -25 - +50 Radio interference suppression : to.DIN VDE 0875/CISPR 15/EN 55015 Harmonics : to DIN VDE 0712 Part 23/IEC 929/IEC 555-2/EN 60929 Immunity : to EN 61547 Length l [mm] : 423 Width b [mm] : 30 Height h [mm] : 30 Distance between holes a [mm] : 415 Standard pack [pcs] : 20 Weight [g] : 415 EAN 40 50300 : 479217 Fully electronic high-frequency control gear for fluorescent lamps represent a major advance in low-maintenance, energy-saving lighting. Comfort: - Flicker-free ignition, flicker-free light, no distracting hum - No flashing or flickering of faulty lamps Economy: - 27% lower power consumption - Lower maintenance costs since there are fewer lamps and no starters to replace - QUICKTRONIC® SHORT, QUICKTRONIC® DE LUXE DIMMABLE for applications with more than 10 switching operations a day - Reduced load on air conditioning systems Electronic control gear QUICKTRONIC® PROFESSIONAL, two-lamp version QTP 2x36/230-240 Page 2 Safety: - Safety shutdown of the power supply to defective lamps - Compliance with European standards for safety, operation and EMC - Overvoltage protective cutout for short-duration voltage surges (DIN VDE 160) and for temporary overvoltages - Greater fire protection because lamps operate at lower temperatures and luminaires can be constructed to meet the EN 60598/DIN 60598/DIN VDE 0710 and DIN VDE 0711 standards - Can be used in emergency lighting systems to DIN VDE 0108. Families: - QUICKTRONIC® INSTANT START: the low-cost ECG for applications in which lamps are switched on and off only infrequently. Now with constant output, making them suitable for damp-proof luminaires - QUICKTRONIC® PROFESSIONAL, the universal warm-start ECG with constant output - QUICKTRONIC® SHORT, the short wide alternative to QUICKTRONIC® PROFESSIONAL. Ideal for all fluorescent lamps and DULUX® L, particularly in applications with frequent switching. Applications: used in modern fluorescent lighting systems in: - offices, computer centres, department stores/supermarkets - production facilities with - long working/lighting hours - rotating machinery - hazardous areas - sound studios, hospitals, factories - tunnels/underground car parks, emergency lighting. General: - Supply voltage: 230V/240V - Mains frequency: 0/50 to 60 Hz - Lamp start: warm start within 2 s. - Radio interference suppression: to DIN VDE 0875/CISPR 15/EN 55015 - Mains harmonics: to DIN VDE 0712 Part 23/IEC 929/IEC 555-2 EN 60929 - Immunity to EN 61547 - Battery voltage may drop to 176 V. Lamps must be ignited at over 198 V however. 100 % luminous flux in dc operation. - Approx. 0.1 s restart time after a changeover interruption of < 0.2 s - The luminous flux value for QTP 1x36/230-240, QTP 1x58/230-24, QTP 2x36/230-240, QTP 2x58/230-24 are 96% of the luminous flux of the choke/starter circuit