TS514, A PRECISION QUAD OPERATIONAL AMPLIFIER ■ LOW OFFSET VOLTAGE : 500µV max. ■ LOW POWER CONSUMPTION ■ SHORT CIRCUIT PROTECTION ■ LOW DISTORTION, LOW NOISE ■ HIGH GAIN-BANDWIDTH PRODUCT N DIP14 (Plastic Package) ■ HIGH CHANNEL SEPARATION ■ ESD INTERNAL PROTECTION ■ MACROMODEL INCLUDED IN THIS SPECIFICATION D SO14 (Plastic Micropackage) DESCRIPTION The TS514 is a high performance quad operational amplifier with frequency and phase compensation built into the chip. The internal phase compensation allows stable operation as voltage follower in spite of its high gain-bandwidth products. The circuit presents very stable electrical characteristics over the entire supply voltage range, and it particularly intended for professional and telecom applications (active filters, etc). ORDER CODE Package Part Number Temperature Range TS514I TS514AI -40°C, +125°C -40°C, +125°C N D • • • • N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT) PIN CONNECTIONS (top view) March 2001 Output 1 1 14 Output 4 Inve rting Input 1 2 - - 13 Inve rting Input 4 Non-inve rting Input 1 3 + + 12 Non-inve rting Input 4 V CC + 4 Non-inve rting Input 2 5 + + 10 Non-inve rting Input 3 Inve rting Input 2 6 - - 9 Inve rting Input 3 Output 2 7 8 Output 3 11 VC C - 1/6 TS514, A SCHEMATIC DIAGRAM (1/4 TS514) ABSOLUTE MAXIMUM RATINGS Symbol VCC Vi Vid Toper ptot Tstg 2/6 Parameter Supply Voltage Input Voltage (positive) (negative) Value Unit ±18 V +V CC -VCC - 0.5 Differential Input Voltage ±(VCC - 1) Operating Free-Air Temperature Range -40 to +125 °C Power Dissipation at Tamb = 70°C Storage Temperature Range 400 mW -65 to +150 °C TS514, A ELECTRICAL CHARACTERISTICS VCC = ±15V, Tamb = 25°C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Icc Supply Current 1.4 2.4 mA Iib Input Bias Current Tmin ≤ Top ≤ Tmax 50 150 300 nA Ri Input Resistance, f = 1kHz 1 MΩ Input Offset Voltage mV TS514 TS514A Vio Tmin ≤ Top ≤ Tmax ∆V io Input Offset Voltage Drift Tmin ≤ Top ≤ Tmax Iio Input Offset Current Tmin ≤ Top ≤ Tmax TS514 TS514A 5 Ios Output Short Circuit Current Avd Large Signal Voltage Gain RL = 2kΩ GBP Gain-bandwidth Product, f = 100kHz ±Vopp 4 1.5 µV/°C Input Offset Current Drift Tmin ≤ Top ≤ Tmax THD Vcc = ±15V Vcc = ± 4V Vcc = ±15V Vcc = ± 4V 23 mA dB 1.8 3 MHz 8 10 18 15 0.03 0.1 nV -----------Hz % ±13 V opp SR Slew Rate Unity Gain, RL = 2kΩ 0.8 CMR Common Mode Rejection Ratio Vic = 10V 90 SVR Supply Voltage Rejection Ratio dVic = 10V Channel Separation, nA nA ------°C 100 95 Large Signal Voltage Swing R L = 10kΩ Vo1/Vo2 20 40 0.08 90 Equivalent Input Noise Voltage, f = 1kHz Rs = 50Ω Rs = 1kΩ Rs = 10kΩ Total Harmonic Distortion Av = 20dB R L = 2kΩ Vo = 2Vpp f = 1kHz Output Voltage Swing RL = 2kΩ 2.5 0.5 5 ∆Iio en 0.5 V ±3 V pp f = 10kHz 28 1.5 V/µs dB dB f = 100Hz f = 1kHz 90 120 dB 3/6 TS514, A MACROMODEL ** Standard Linear Ics Macromodels, 1993. ** CONNECTIONS : * 1 INVERTING INPUT * 2 NON-INVERTING INPUT * 3 OUTPUT * 4 POSITIVE POWER SUPPLY * 5 NEGATIVE POWER SUPPLY .SUBCKT TS514 1 3 2 4 5 (analog) **************** *************** ********** ********** ***** .MODEL MDTH D IS=1E-8 KF=6.647807E-16 CJO=10F * INPUT STAGE CIP 2 5 1.000000E-12 CIN 1 5 1.000000E-12 EIP 10 5 2 5 1 EIN 16 5 1 5 1 RIP 10 11 1.300000E+01 RIN 15 16 1.300000E+01 RIS 11 15 6.437882E+01 DIP 11 12 MDTH 400E-12 DIN 15 14 MDTH 400E-12 VOFP 12 13 DC 0 VOFN 13 14 DC 0 IPOL 13 5 2.000000E-05 CPS 11 15 9.75E-10 DINN 17 13 MDTH 400E-12 VIN 17 5 0.000000e+00 DINR 15 18 MDTH 400E-12 VIP 4 18 1.500000E+00 FCP 4 5 VOFP 1.525000E+01 FCN 5 4 VOFN 1.525000E+01 FIBP 2 5 VOFN 5.000000E-03 FIBN 5 1 VOFP 5.000000E-03 * AMPLIFYING STAGE FIP 5 19 VOFP 1.125000E+03 FIN 5 19 VOFN 1.125000E+03 RG1 19 5 6.512062E+05 RG2 19 4 6.512062E+05 CC 19 29 1.500000E-08 HZTP 30 29 VOFP 8.944787E+02 HZTN 5 30 VOFN 8.944787E+02 DOPM 19 22 MDTH 400E-12 DONM 21 19 MDTH 400E-12 HOPM 22 28 VOUT 6.521739E+03 VIPM 28 4 1.500000E+02 HONM 21 27 VOUT 6.521739E+03 VINM 5 27 1.500000E+02 GCOMP 5 4 4 5 7.485029E-04 RPM1 5 80 1E+09 RPM2 4 80 1E+09 GAVPH 5 82 19 80 2.99E-03 RAVPHGH 82 4 668 RAVPHGB 82 5 668 RAVPHDH 82 83 1000 RAVPHDB 82 84 1000 CAVPHH 4 83 0.352E-09 CAVPHB 5 84 0.352E-09 EOUT 26 23 82 5 1 VOUT 23 5 0 ROUT 26 3 150 COUT 3 5 1.000000E-12 DOP 19 25 MDTH 400E-12 VOP 4 25 1.785252E+00 DON 24 19 MDTH 400E-12 VON 24 5 1.785252E+00 .ENDS ELECTRICAL CHARACTERISTICS Vcc = ±15V, Tamb = 25°C (unless otherwise specified) Symbol Conditi ons Vio Value Unit 0 mV Avd RL = 2kΩ 94 V/mV Icc No load, per operator 325 µA Vicm -15 to 13.5 V VOH RL = 2kΩ +13 V VOL RL = 2kΩ -13 V Isink Vo = 0V 24 mA Isource Vo = 0V 24 mA GBP RL = 2kΩ, CL = 100pF 3 MHz SR RL = 2kΩ, CL = 100pF 1.4 V/µs ∅m RL = 2kΩ, CL = 100pF 55 Degrees 4/6 TS514, A PACKAGE MECHANICAL DATA 14 PINS - PLASTIC DIP Millimeters Inches Dim. Min. a1 B b b1 D E e e3 F i L Z Typ. 0.51 1.39 Max. Min. 1.65 0.020 0.055 0.5 0.25 Typ. 0.065 0.020 0.010 20 0.787 8.5 2.54 15.24 0.335 0.100 0.600 7.1 5.1 0.280 0.201 3.3 1.27 Max. 0.130 2.54 0.050 0.100 5/6 TS514, A PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO) G c1 b1 e a1 b A a2 C L s e3 E D M 8 1 7 F 14 Millimeters Inches Dim. Min. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S Typ. Max. Min. 1.75 0.2 1.6 0.46 0.25 0.1 0.35 0.19 Typ. 0.069 0.008 0.063 0.018 0.010 0.004 0.014 0.007 0.5 Max. 0.020 45° (typ.) 8.55 5.8 8.75 6.2 0.336 0.228 1.27 7.62 0.344 0.244 0.050 0.300 3.8 4.0 0.150 0.157 4.6 0.5 5.3 1.27 0.68 0.181 0.020 0.208 0.050 0.027 8° (max.) Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK. Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibil ity for the consequences of use of such information nor for any infring ement of patents or other righ ts of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change witho ut notice. This publ ication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life suppo rt devices or systems withou t express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom http://www. st.com 6/6