Bussmann® DIN Style Type D and Neozed D, NZ Low Voltage Industrial Fuses TYPE ‘D’ Fuse 21.5 13.2 50 50 50 D D 33.5 27.5 57 D D Figure 1 Figure 2 Figure 3 Figure 4 500 Volts a.c. 2 to 100 Amps, 100k AIC 'D' type fuses complying with DIN 49360 Part 2 and DIN 49515, operating class gL. Figure Number Catalog Dimensional Data (mm) Ampere Color Carton Number A B D Rating Code Quanity 2D16 – – 6 2 Pink 4D16 – – 6 4 Brown 6D16 – – 6 6 Green 1 10D16 – – 8 10 Red 5 16D16 – – 10 16 Grey 20D16 – – 12 20 Blue 25D16 – – 14 25 Yellow 2D27 – – 6 2 Pink 4D27 – – 6 4 Brown 6D27 – – 6 6 Green 2 10D27 – – 8 10 Red 5 16D27 – – 10 16 Grey 20D27 – – 12 20 Blue 25D27 – – 14 25 Yellow 35D33 – – 16 35 Black 3 50D33 – – 18 50 White 5 63D33 – – 20 63 Copper 80D125 – – 5 80 Silver 10 4 100D125 – – 7 100 Red Additional Fuselinks: Quick acting fuselinks in body sizes D16, D27, D33 and D125 rated 2-100 Amps. Reference number suffixed Q, i.e. 10D27Q. Voltage rating 500 Volts. Notes: (a) Gauge rings and keys can also be supplied. NEOZED FUSE B 36 Figure 5 440 Volts a.c. 2 to 63 Amps, 100kAIC (Also suitable for use on 250 Volt d.c. systems.) Figure Number 5 Catalog Number 2NZ01 4NZ01 6NZ01 10NZ01 16NZ01 20NZ02 25NZ02 35NZ02 50NZ02 63NZ02 Dimensional Data (mm) A B – 11 – 11 – 11 – 11 – 11 – 15 – 15 – 15 – 15 – 15 D – – – – – – – – – – Ampere Rating 2 4 6 10 16 20 25 35 50 63 Color Code Pink Brown Green Red Grey Blue Yellow Black White Copper Carton Quanity 10 The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled.This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No. D, NZ Page 1 of 1 BIF Doc #4124