ETC A12112-48DC

T E C H N IC A L S P E C IF IC A T IO N
SPECIFICATION
A121 & AL121 ‘AlertAlarm’
Sounder / Combination unit
•
Maximum output : 126dB(A) @ 1metre
Nominal output : 121dB(A) @ 1 metre +/-3dB(A). Tone2
•
Fully programmable version with 4 stages available.
(See Programmable Unit Technical Spec. sheet)
•
45 tones (UKOOA / PFEER compliant)
•
IP55 - can be increased to IP66with WR kit
•
3 stage alarm option
•
Enclosure material : UL94V0 & 5VA rated FR ABS
•
Volume control
•
Colour available : Red (RAL3000) or White
•
Automatic synchronisation on multi-sounder systems
•
Operating temperature : -25 to +55°C
•
300m effective range @ 1kHz
•
Storage temperature : -40 to +70°C
•
Voltages : 24vdc(10-30vdc); 48vdc(35-60vdc); 24vac;
115vac;230vac
•
Relative humidity : 90% at 20°C
•
Other voltages available upon request
•
Weight A121 : DC: 2.10kg AC: 2.70kg
AL121: DC: 2.30kg AC: 2.90kg
•
DC versions have reverse polarity diode protection
•
UL approved version available.
•
Positive stage switching DC version available.
VERSIONS
PHOTO
Installation Features.
A very high
ouput sounder,
ideal for
industrial
environments
with high
ambient noise
levels.
•
Cable gland knockout in the rear of
the unit.
•
Side M20 cable gland entry and
IP55 stopping plug.
•
Unit can be mounted using external
lugs or internal BESA compatible
fixing positions.
•
•
All units offer IN & OUT terminals
Terminals accept 0.5 to 4.0mm²
cables.
Can be ordered with the L101 ‘AlertAlight’
Beacon to create the AL121 combination unit.
Units can be operated individually or linked for
complete audio visual signalling.
See the L101Technical specificaton sheet for
details on the beacon.
Page 1 of 3
No liability is accepted for any consequence of the use of this
document.
The technical specification of this unit is subject to change without
notice due to our policy of continual product development. All
dimensions are approximate.This unit is sold subject to our standard
conditions of sale, a copy of which is available on request.
Tel : 0044(0)2087438880
Fax : 0044(0)2087404200
mail : [email protected]
web : e-2-s.com
TONE TABLE
A121 / AL121 ‘AlertAlarm’ Sounder / Combination unit
Stage 1
Frequency Description.
dB@ 1m
Stage 2
Stage 3
Tone 1
340 Hz
Tone 2
800/1000Hz @ 0.25 sec
113dB(A) @ 1m
Tone 2
Tone 5
121dB(A) @ 1m
Tone 17 Tone 5
Tone 3
Tone 4
500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop
121dB(A) @ 1m
Tone 2
Tone 5
800/1000Hz @ 1Hz
121dB(A) @ 1m
Tone 6
Tone 5
Tone 5
2400Hz
125dB(A) @ 1m
Tone 3
Tone 20
Tone 6
2400/2900Hz @ 7Hz
123dB(A) @ 1m
Tone 7
Tone 5
Tone 7
2400/2900Hz @ 1Hz
125dB(A) @ 1m
Tone 10 Tone 5
Tone 8
500/1200/500Hz @ 0.3Hz
121dB(A) @ 1m
Tone 2
Tone 9
1200/500Hz @ 1Hz DIN / PFEER P.T.A.P.
121dB(A) @ 1m
Tone 15 Tone 2
Tone 10
2400/2900Hz @ 2Hz
126dB(A) @ 1m
Tone 7
Tone 5
Tone 11
1000Hz @ 1Hz
121dB(A) @ 1m
Tone 2
Tone 5
Tone 12
800/1000Hz @ 0.875Hz
121dB(A) @ 1m
Tone 4
Tone 5
Tone 13
2400Hz @ 1Hz
125dB(A) @ 1m
Tone 15 Tone 5
Tone 14
800Hz 0.25sec on, 1 sec off
120dB(A) @ 1m
Tone 4
Tone 5
Tone 15
800Hz
120dB(A) @ 1m
Tone 2
Tone 5
Tone 16
660Hz 150mS on, 150mS off
118dB(A) @ 1m
Tone 18 Tone 5
Tone 17
544Hz (100mS)/440Hz (400mS) NF S 32-001
117dB(A) @ 1m
Tone 2
Tone 27
Tone 18
660Hz 1.8sec on, 1.8sec off
118dB(A) @ 1m
Tone 2
Tone 5
Tone 19
1.4KHz-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s -NFC48-265
126dB(A) @ 1m
Tone 2
Tone 5
Tone 20
660Hz
118dB(A) @ 1m
Tone 2
Tone 5
Tone 21
554Hz/440Hz @ 1Hz
118dB(A) @ 1m
Tone 2
Tone 5
Tone 22
544Hz @ 0.875 sec.
118dB(A) @ 1m
Tone 2
Tone 5
Tone 23
800Hz @ 2Hz
120dB(A) @ 1m
Tone 6
Tone 5
Tone 24
800/1000Hz @ 50Hz
120dB(A) @ 1m
Tone 29 Tone 5
Tone 25
2400/2900Hz @ 50Hz
124dB(A) @ 1m
Tone 29 Tone 5
Tone 26
Bell
118dB(A) @ 1m
Tone 2
Tone 27
554Hz
117dB(A) @ 1m
Tone 26 Tone 5
Tone 28
440Hz
117dB(A) @ 1m
Tone 2
Tone 5
Tone 29
800/1000Hz @ 7Hz
121dB(A) @ 1m
Tone 7
Tone 5
Tone 30
300Hz
114dB(A) @ 1m
Tone 2
Tone 5
Tone 31
660/1200Hz @ 1Hz
121dB(A) @ 1m
Tone 26 Tone 5
Tone 32
Two tone chime.
118dB(A) @ 1m
Tone 26 Tone 15
Tone 33
745Hz @ 1Hz
116dB(A) @ 1m
Tone 2
Tone 34
1000 & 2000Hz @ 0.5 sec Singapore
121dB(A) @ 1m
Tone 38 Tone 45
Tone 35
420Hz @ 0.625 sec
118dB(A) @ 1m
Tone 36 Tone 5
Tone 36
500-1200Hz 3.75sec /0.25sec. Australian Evac.
121dB(A) @ 1m
Tone 35 Tone 5
Tone 37
1000Hz PFEER Toxic Gas
121dB(A) @ 1m
Tone 9
Tone 38
2000Hz
122dB(A) @ 1m
Tone 34 Tone 45
Tone 39
800Hz 0.25sec on, 1 sec off
120dB(A) @ 1m
Tone 23 Tone 17
Tone 40
544Hz (100mS)/440Hz (400mS) NF S 32-001
121dB(A) @ 1m
Tone 31 Tone 27
Tone 41
1200 Hz
122dB(A) @ 1m
Tone 2
Tone 5
Tone 42
800 Hz
121dB(A) @ 1m
Tone 2
Tone 5
Tone 43
1200 Hz
122dB(A) @ 1m
Tone 2
Tone 5
Tone 44
2400 Hz
124dB(A) @ 1m
Tone 2
Tone 5
Tone 45
1KHz 1s on, 1s off PFEER Gen. Alarm
121dB(A) @ 1m
Tone 38 Tone 34
Australian Alert
Tone 5
Tone 15
Tone 5
Tone 45
Note : SPL readings are at nominal voltage, typically +/-3dB and are for indication purposes only.
Where applicable, reduce outputs by 5dB when a 10-30vdc unit is supplied 12vdc.
Page 2 of 3
No liability is accepted for any consequence of the use of this
document.
The technical specification of this unit is subject to change without
notice due to our policy of continual product development. All
dimensions are approximate.This unit is sold subject to our standard
conditions of sale, a copy of which is available on request.
Tel : 0044(0)2087438880
Fax : 0044(0)2087404200
mail : [email protected]
web : e-2-s.com
A121 / AL121 ‘AlertAlarm’ Sounder / Combination unit
191,50
Ø9,00
A121
190,00
210,00
184,00
210,00
190,00
190,00
274,00
DIMENNSIONS
190,00
CURRENT CONSUMPTION
AL121
Ø9,00
190,00
All dimensions are in millimetres.
Voltage :
Input voltages and current consumption for the A121 sounder.
Voltage range :
Current mA :
Voltage :
Input voltages and current consumption for the AL121 combination
sounder & xenon strobe beacon.
ORDERING INFORMATIION
Ordering code:
Voltage range :
24vdc
48vdc
115vac
230vac
24vac
50/60Hz
50/60Hz
50/60Hz
10-30vdc
35-60vdc
+/-10%
+/-10%
+/- 10%
950mA
600mA
240mA
120mA
1000mA
12vdc
24vdc
48vdc
115vac
230vac
24vac
50/60Hz
50/60Hz
50/60Hz
10-14v
20-28v
42-54v
+/-10%
+/-10%
+/- 10%
Current mA :
1450mA
850mA
775mA
310mA
155mA
1300mA
DC
24
AL121
R
/
R*
* = If applicable
Lens
Product
Supply
Voltage
Housing
A121
DC
12
R
Red
A
Amber
AL121
AC
24
W
White
B
Blue
48
C
Clear
115
G
Green
230
O
Opal
R
Red
Y
Yellow
TSP3501-A
No liability is accepted for any consequence of the use of this
document.
The technical specification of this unit is subject to change without
notice due to our policy of continual product development. All
dimensions are approximate.This unit is sold subject to our standard
conditions of sale, a copy of which is available on request.
Page 3 of 3
Tel : 0044(0)2087438880
Fax : 0044(0)2087404200
mail : [email protected]
web : e-2-s.com