ETC BXB75-48S3V3FLT

BXB75 Series
Single output
DC/DC CONVERTERS
•
•
•
•
•
•
•
•
•
50-75W Wide Input DC/DC Converters
1
Industry standard footprint
MTBF >1.4 million hours (Bellcore 332)
Input voltage to ETS300-132-2
Adjustable output voltage
No minimum load required
Separate case ground pin
2:1 input range for battery powered applications
Undervoltage lockout (UVLO)
UL, VDE and CSA safety approvals
The BXB75 Series are high power density DC/DC converters packaged in the industry
standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when
specifying for both new and replacement designs. Suitable for a wide range of
applications in nearly any industry, the BXB75 was particularly designed with
communication and distributed power applications in mind. Using Bellcore 332, the
MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four
threaded M3 inserts makes heatsink attachment and optimum thermal management
easy. The BXB75 series is approved to IEC950 by UL, CSA and VDE.
2 YEAR WARRANTY
SPECIFICATIONS
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS (continued)
Voltage adjustability
60% to 110%
Set point accuracy
±1.0%
Undervoltage lockout
48Vin: power up
48Vin: power down
34V
32.5V
Power up
Remote ON/OFF
20ms
20ms
Line regulation
Low line to high line
±0.05%
Start-up time
(See Note 8)
Load regulation
Full load to min. load
±0.10%
EMC CHARACTERISTICS
Minimum load
Overshoot
0%
At turn-on and turn-off
Undershoot
Ripple and noise
(5Hz to 20MHz)
(See Note 1)
None
None
3.3V and 5V
75mV pk-pk,
20mV rms
100mV pk-pk,
30mV rms
12V
Temperature coefficient
±0.01%/°C
Transient response
(See Note 2)
±2.0% max. deviation
170µs recovery
to within ±1.0%
Remote sense
0.5VDC transmission
line drop compensation
Bellcore 1089
FCC part 15
EN55022, CISPR22
Efficiency
See table
Isolation voltage
Input/case
Input/output
Output/case
Switching frequency
Fixed
Approvals and
standards (See Note 5)
48Vin nominal
36 to 75VDC
Input current
No load
Remote OFF
100mA max.
20mA max.
VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
Case material
Input current (max.)
(See Note 4)
3.5A max. @ Io max.
and Vin = 0 to 75V
(See Note 6)
Active low remote ON/OFF
Logic compatibility
ON
OFF
5mA pk-pk
(See Note 7)
Open collector ref to -input
1.2VDC max.
Open circuit
MTBF
1500VDC
1500VDC
1500VDC
500kHz typ.
Aluminum baseplate
with plastic case
UL94V-0
Weight
Input voltage range
Level A
Level A
Level A
GENERAL SPECIFICATIONS
Material flammability
INPUT SPECIFICATIONS
Input reflected ripple
Conducted emissions
(See Note 3)
110g (3.88oz)
Bellcore 332
1,400,000 hours min.
MIL-HDBK-217F
580,000 hours min.
@ 40°C, 100% full load
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating case temp. -40°C to +100°C
Non-operating
-55°C to +125°C
Altitude
Operating
Non-operating
Vibration
5Hz to 500Hz
10,000 feet max.
40,000 feet max.
2.4G rms (approx.)
File Name: BXB75S.PDF Rev: 02 Oct 2002
BXB75 Series
Single output
DC/DC CONVERTERS
50-75W Wide Input DC/DC Converters
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT
POWER
(MAX.)
INPUT
VOLTAGE
OVP
OUTPUT
VOLTAGE
OUTPUT
CURRENT
(MIN.)
OUTPUT
CURRENT
(MAX.)
EFFICIENCY
(TYP.)
LINE
LOAD
MODEL
NUMBER (7)
50W
36-75VDC
4.3VDC
3.3V
0A
15A
79%
±0.05%
±0.1%
BXB75-48S3V3FLT
75W
36-75VDC
6.5VDC
5V
0A
15A
83%
±0.05%
±0.1%
BXB75-48S05FLT
75W
36-75VDC
14.5VDC
12V
0A
6.25A
84%
±0.05%
±0.1%
BXB75-48S12FLT
Notes
1
2
3
4
5
6
7
8
REGULATION
PROTECTION
Measured with 10µF tantalum capacitor and 1µF ceramic capacitor across
output.
di/dt = 0.1A/1µs, Vin = 48VDC, Tc = 25°C, load change = 0.5 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
Units should be characterised within systems. External components
required.
Input fusing is recommended based on surge current and maximum input
current.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
Active high remote on/off option is available (standard product is active
low), designate with the suffix ‘FHT’ e.g. BXB75-48S05FHT. Consult
factory for further details and options.
Start-up into resistive load.
Short circuit protection
Continuous, automatic recovery
Overvoltage protection
Non-latching
Undervoltage protection
Non-latching
Thermal protection
110°C baseplate,
automatic recovery
TELECOM SPECIFICATION
Central office interface A
ETS300-132-2
EXTERNAL OUTPUT TRIMMING
PIN CONNECTIONS
PIN
NUMBER
FUNCTION
1
+ Vin
Output can be externally
trimmed by using the
method shown.
8
TRIM
UP
RT1
OR
RT2
7
2
Remote ON/OFF
3
Case
4
- Vin
5
- Vout
6
- Sense
7
Trim
8
+ Sense
9
+ Vout
TRIM
DOWN
6
www.artesyn.com
File Name: BXB75S.PDF Rev: 02 Oct 2002
BXB75 Series
Single output
DC/DC CONVERTERS
50-75W Wide Input DC/DC Converters
3
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
VIEW SHOWN
PIN SIDE UP
1.90
(48.26)
0.200 (5.08) Min.
Length for all Input
and Output Pins
0.190 (4.83) ± 0.010 (0.25)
VI(+)
Vo (-)
+SEN TRIM -SEN
1.400 (35.56)
ON/OFF
0.400 (10.16)
0.700 (17.77)
0.400 (10.16)
1.000 (25.40)
2.000 (50.80)
2.40 (60.96)
Max.
1.400 (35.56)
Vo(+)
1.000 (25.40)
CASE
VI (-)
0.500 (12.69) ± 0.010 (0.25)
7 x Ø.040 (1.02) ±0.002 (0.05)
0.190 (4.83) ±0.010 (0.25)
2.28 (57.91) Max.
2 x Ø.080 (2.03) ± 0.002 (0.05)
4 x M3 x 0.5 Through
0.500 (12.70)
ALL DIMENSIONS IN INCHES (mm)
Tolerance : x.xx ±0.02in. (0.51mm)
x.xxx ±0.010in. (0.254mm)
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 10401-3336-1095
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062C
Data Sheet © Artesyn Technologies® 2002
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
www.artesyn.com
File Name: BXB75S.PDF Rev: 02 Oct 2002