Preliminary Specifications Low Cost Six-Way Power Splitter/Combiner 2200 - 2500 MHz DS56-0004 V1.A SOW-16 Features ● ● ● ● ● ● Small Size and Low Profile Industry Standard SOW-16 SMT Plastic Package Superior Repeatability Insertion Loss: 1.1 dB Typical Isolation: 22 dB Typical Low Cost Pin 16 Pin 1 The DS56-0004 is fabricated using a passive-integrated circuit process. The process features full chip passivation for increased performance and reliability. .0926-.1043 (7.40-7.60) .3977-.4133 (10.10-10.50) -A- Description M/A-COM’s DS56-0004 is an IC-based monolithic power splitter/combiner in a low cost SOW 16-lead plastic package. This 6-way power splitter/combiner is ideally suited for applications where small size, low profile and low cost, without sacrificing performance, are required. Typical applications include base stations, portables and PCMCIA cards for wireless data, spread spectrum and some satellite systems. Available in tape and reel. .2914-.2992 .394-.419 (7.40-7.60) (10.00-10.65) -B.010(0.25) M B M Orientation Mark .010-.029 x 45° Chamfer (0.25-0.75) 0°-8° -C- .004 (0.10) 0.050(1.27) BSC. .0040-.0118 (0.10-0.30) .016-.050 (0.40-1.27) .013-.020 TYP (0.33-0.51) .010(0.25) M C A M B S .0091-.0125 (0.23-0.32) 16-Lead SOP outline dimensions Wide body (.300) (All dimensions per JEDEC No. MS-013-AA, Issue C) Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ± 0.25) .xx = ± 0.02 (.x = ± 0.5) Ordering Information Part Number Package DS56-0004 DS56-0004-TR DS56-0004-RTR SOW 16-Lead Plastic Package Forward Tape & Reel* Reverse Tape & Reel* specific reel size is required, consult factory for part number * Ifassignment. Typical Electrical Specifications1, TA = +25°C Parameter Insertion Loss Isolation VSWR Amplitude Balance Phase Balance Units Min. dB dB 18 dB ° Typ. Max. 1.2 22 1.5:1 0.8 10° 1.5 1.8:1 1.2 18° 1. All specifications apply with a 50-ohm source and load impedance. This Preliminary Specifications Data Sheet Sheet Contains Typical Electrical Specifications Which May Change Prior to Final Introduction. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 Low Cost Six-Way Power Splitter/Combiner DS56-0004 V1.A Absolute Maximum Ratings 1 Parameter Input Power 2 Operating Temperature Storage Temperature Functional Diagram 3 Absolute Maximum 1 W CW -40°C to +85°C -65°C to +150°C GND 1 RF 3 (OUT) 2 RF 4 (OUT) 15 GND 3 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W maximum. GND 14 RF 2 (OUT) 4 RF 5 (OUT) 13 GND 5 Recommended PCB Configuration GND 12 RF 1 (OUT) 6 (Dimensions in Inches) mm .428 .335 .016 DIA. PLATED THRU (21X) GND 16 RF 6 (OUT) 11 GND 7 GND 10 RF IN 8 GND 9 PINS 1,3,4,7,8,9,12,14, AND 16 MUST BE DC AND RF GROUNDED. .067 TYP. RF 3 RF 4 RF 2 RF 5 RF 1 RF 6 .030 TYP. RF IN .041 .050 DIA. PLATED THRU (3X) CIRCUIT MATERIAL: FR-4 .016 THICK .093 TYP. Typical Performance @ +25°C VSWR vs FREQUENCY 2.00 -0.5 1.75 VSWR INSERTION LOSS (dB) INSERTION LOSS vs FREQUENCY 0.0 -1.0 Output Input 1.50 1.25 -1.5 -2.0 2200 2250 2300 2350 2400 2450 2500 1.00 2200 2250 2300 2350 2400 2450 2500 FREQUENCY (MHz) FREQUENCY (MHz) ISOLATION vs FREQUENCY ISOLATION (dB) 0 -10 -20 -30 -40 2200 2250 2300 2350 2400 2450 2500 FREQUENCY (MHz) This Preliminary Specifications Data Sheet Sheet Contains Typical Electrical Specifications Which May Change Prior to Final Introduction. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020