Preliminary Specifications Low Cost SMT High Pass Filter 1700 - 3000 MHz FLO5-0002-G V1.00 Features ● ● ● ● ● ● SO-8 Small Size and Low Profile Industry Standard SOIC-8 SMT Plastic Package Superior Repeatability Typical Insertion Loss 0.5 dB Typical Rejection 20 dB 2 Watt Power Handling PIN 8 .1497-.1574 (3.80-4.00) -B- Orientation mark PIN 1 .1890-.1968 (4.80-5.00) -A- .0532-.0688 (1.35-1.75) 0°-8° -C- Description .004 (0.10) M/A-COM’s FLO5-0002-G is an IC based monolithic high pass filter in a low cost SOIC-8 plastic package. This filter is ideally suited for applications where small size, low cost and low loss are required. .0040-.0098 (0.10-0.25) .013-.020 TYP. (0.33-0.51) .050(1.27) BSC. .2284-.2440 (5.80-6.20) .010(0.25) M B M .0099-0.0196 x 45° Chamfer (0.25-0.50) .016-.050 (0.40-1.27) .0075-0.0098 (0.19-0.25) .010(0.25) M C A M B S Typical applications include base station switching networks and portable phones where size and PCB real estate are at a premium. Available in tape and reel. 8- Lead SOP outline dimensions Narrow body .150 (All dimensions per JEDEC No. MS-012-AA, Issue C) Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) The FLO5-0002-G is fabricated using a passive-integrated circuit process. The process features full chip passivation for increased performance and reliability. Ordering Information Part Number FLO5-0002-G FLO5-0002-G-TR FLO5-0002-G-RTR Package SOIC 8-Lead Plastic Package Forward Tape and Reel* Reverse Tape and Reel* * If specific reel size is required, consult factory for part number assignment. Typical Electrical Specifications1, TA = +25°C Parameter Insertion Loss: 1700 - 3000 MHz VSWR: 1700 - 3000 MHz Rejection: DC - 1000 MHz Units dB Min. dB 15 Typ. 0.5 1.5:1 20 Max. 1.0 1.8:1 1. All specifications apply with 50 - ohm source and load impedance. The Preliminary Specifications Data Sheet Contains Typical Electrical Specifications Which May Change Prior to Final Introduction. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 Low Cost SMT High Pass Filter FLO5-0002-G V1.00 Absolute Maximum Ratings1 Parameter Functional Diagram Absolute Maximum Input Power 2 W CW Operating Temperature - 40°C to + 85°C Storage Temperature - 65°C to + 150°C RF GND OUT GND GND 5 8 1. Exceeding these limits may cause permanent damage. Recommended PCB Configuration .036 TYP. 1 .072 .067 TYP. .030 TYP. RF IN GND GND All unused pins must be RF and DC grounded. Pins 1 and 4 are thermal ground contacts. RF OUT RF IN .244 4 GND .113 Ø.050 PLATED THRU (2X) Ø.016 PLATED THRU (16X) CIRCUIT MATERIAL: FR-4, .016 THICK. Typical Performance @ +25°C INSERTION LOSS vs FREQUENCY VSWR vs FREQUENCY 2 0 -5 -15 1.6 VSWR INSERTION LOSS dB 1.8 -10 -20 -25 -30 1.4 1.2 -35 -40 1 0 300 600 900 1200 1500 1800 2100 2400 2700 3000 0 300 600 900 1200 1500 1800 2100 2400 2700 3000 FREQUENCY MHz FREQUENCY MHz The Preliminary Specifications Data Sheet Contains Typical Electrical Specifications Which May Change Prior to Final Introduction. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020