Bussmann® Industrial HRC Fuse 13.8 x 67.3mm, BS88: Offset Blade Tags ESD Part 6, IEC 269-1 4 5 10 2 1,000 16 20 25 32 40 50 63 63M80 63M100 Time-Current Characteristic Curve (Full Size Curves Available) CURRENT RATING CATALOG SYMBOL: ESD INDUSTRIAL HRC FUSE OFFSET BLADE TAGS PACKAGE QUANTITY: 20 80kA INTERRUPTING RATING MOUNTS IN CAMLOCK OR SAFELOC SERIES HOLDERS Dimensional Data: TIME IN SECONDS 100 D 10 1 N A F B .1 100 1 10 .01 1,000 E CURRENT IN AMPERES Electrical Characteristics Catalog Number ESD2 ESD4 ESD6 ESD10 ESD16 ESD20 ESD25 ESD32 ESD40 ESD50 ESD63 ESD63M80 ESD63M100 Ampere Rating 2 4 6 10 16 20 25 32 40 50 63 63M80 63M100 I2T (Amp2 Seconds) PreTotal At Arcing 415V 1.3 4.6 8 27 29 100 120 400 120 470 260 1070 560 2300 710 3000 1500 6000 2700 8700 5050 13,300 12,650 40,000 20,750 70,000 Total At 550V 0.9 1.4 115 490 730 1700 3550 5000 — — — — — Nom Watts Loss 5 30 1.8 2.1 1.8 1.8 2 2.9 3.2 3.9 4.6 3.4 2.5 Dimensions (Inches/mm Rated Voltage A 550AC 250DC B E F N 67.0 15.0 0.05 1.2 0.14 3.5 0.54 13.8 35.5 415AC 250DC 415AC D 0.69 17.5 36.5 21.0 68.0 The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No. ESD Page 1 of 1 BIF Doc #4101