Bussmann® Blade-Type Fuses MAX 32 Volts DC, 20 to 80 Amps Dimensional Data All tolerances: ±0.005∑ ±0.3mm 30A BUSS MAXI-FUSE .350" .850" (8.9mm) (21.6mm) 0.5" (12.7mm) .315" (8.0mm) Catalog Symbol: MAX Fast-Acting Ampere Rating: 20 to 80 Amperes Voltage Rating: 32 Volts DC (or less) Interrupting Rating: 1,000 Amperes 30 40 50 60 Time-Current Characteristic Curves–Average Melt 100 AMPERE RATING Electrical Ratings (Catalog Symbol, Amp Rating, and Color) Yellow MAX-60 Blue MAX-30 Green MAX-70 Tan MAX-40 Orange MAX-80 Neutral MAX-50 Red Shelf Carton Quantity and Weight Fuse Type Fuse Qty. No. of Boxes Wgt. (Lbs.) MAX 20 20 (1-in) 0.60 Dimensions (Inches) Volume (Cu. Ins.) 2.88 ≈ 4.125 ≈ 1.75 20.0 10 TIME IN SECONDS MAX-20 1 Recommended Bussmann Fuseholders Blade-Type Cover Only 5∑ Length .1 .01 CURRENT IN AMPERES 2,000 HHX-C #6 Lead Wire; 20-60 Amps 1,000 Body Only 100 Fuseholder w/Cover HHX-B 10 HHX 4 MAX The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-21-98 SB98107 Rev. A Form No. MAX Page 1 of 1 BIF Doc #2049