PULSEJACK TM 1X1 Tab-UP RJ45 www.pulseeng.com Description: 10/100 Base-TX RJ45 1X1 Tab-UP with LEDs 8-pin (J1 series) and 6-pin (JP series) integrated magnetics connector (ICM), designed to support applications, such as SOHO (ADSL modems), LAN-on-Motherboard (LOM), Hub and Switches. Features and Benefits: 1X1 Tab-UP RJ45 with internal magnetics 8 or 6-pin signal pin versions available Available with LEDs Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Internal magnetics are 100% electrically tested for HI-POT and functionality Electrical Performance Summary: Internal magnetics options available Meets or exceeds IEEE 802.3 standard for 100Base-T 350 µH minimum OCL with 8 mA bias current High performance for maximum EMI suppression Minimum 1500 Vrms isolation per IEEE 802.3 requirement Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C Turns1,2 Ratios Part Number TX RX J1006F01P 1CT:1 1CT:1 J1011F01P 1CT:1CT 1CT:1CT J1012F01C 1CT:1CT 1CT:1CT J1012F21C 1CT:1CT 1CT:1CT J1012F21K 1CT:1CT 1CT:1CT J1012F21R 1CT:1CT 1CT:1CT J1012F21L 1CT:1CT 1CT:1CT J1026F01 1CTS:1 1CT:1CT J1026F01P 1CTS:1 1CT:1CT J1026F21C 1CTS:1 1CT:1CT JP006821U 1CT:1 1CT:1 JP011821U 1CT:1CT 1CT:1CT JP026821U 1CTS:1CT 1CT:1CT LEDs3 L/R Insertion Loss (dB TYP) L/R 1-65 MHz G/Y G/Y Y/G Y/G G/G RG/RY RY/RG NONE G/Y Y/G G_O/Y G_O/Y G_O/Y -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 Return Loss (dB TYP) 100 Ω ± 15 Ω Common Mode Rejection (dB TYP) Crosstalk (dB TYP) 1-10 MHz 10-30 MHz 30-60 MHz 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-50 MHz -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 Notes: 1. Both transmit and receive channels meet IEEE 802.3 specifications. 2. Different electrical and mechanical specifications can be accommodated. -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 Hipot (Vrms) 50-150 MHz @60Hz 1 MIN -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 3. LEDs Left/Right: G=green, Y=yellow, G_O=green/orange bi-color,R = LEDs with resistors. 4. J1/JP series platform capable of withstanding 235°C solder reflow. RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JP/J1 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. RJ45 Material Specification Part Number Material Shield Finish JP/J1 Series Cartridge Brass 10-20m inches Nickel over 10-20m inches Nickel Material Contact Plating Area Solder Area Material Phosphor Bronze Nickel underplating and selective gold plating 30µ inches 120µ inches sN90/pB10 over 50µ inches nickel Thermoplastic Notes: 1. All connector part numbers starting with the series prefix JP/J1 comply to the above limits. Housing Specification UL 94 V-0 2. Connector dimensions comply with FCC dimension requirements. US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 1 PRELIMINARY J402.P (10/02) PULSEJACK TM 1X1 Tab-UP RJ45 www.pulseeng.com J1 Series Mechanicals .640 16,26 1.00 MAX 25,4 RIGHT LED LEFT LED .532 .003 13,51 0,08 .150 SHIELD PIN 3,81 BACK FRONT .425 10,80 HOUSING POST (post and shield) .130 3,30 .250 6,35 .100 2,54 .020 0,51 SIGNAL LEADS .130 3,30 .135 .020 3,43 0,51 FRONT VIEW .125 3,18 .020 LED 0,51 LEADS .002 0,05 Patent Pending TM J10XXXXXX Date Code Country of Origin BACK VIEW .290 .002 7,37 0,05 .002 0,05 .003 0,08 SIDE VIEW .390 9,91 .290 7,37 .060 1,52 .040 1,02 .290 7,37 .000 0,00 4X .040 .003 1,02 0,08 .670 17,02 12 11 .130 3,30 10 9 7 5 3 8 6 4 .560 14,22 PIN #1 8X .035 0,89 .003 0,08 .010 (TOP OF PCB 0,25 TO BOTTOM OF OPENING) 2 .250 6,35 2X .064 1,63 .003 0,08 RECOMMENDED PANEL CUTOUT BACK .100 2,54 4X R .010 MAX 0,25 FACE VIEW .050 1,27 2X .125 3,18 .129 3,28 .135 3,43 .675 17,15 FRONT .000 0,00 .050 1,27 .100 2,54 .150 3,81 .200 5,08 .250 6,35 .300 7,62 .350 8,89 .400 10,16 .485 12,32 SUGGESTED PCB LAYOUT Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com PRELIMINARY J402.P (10/02) 2 PULSEJACK TM 1X1 Tab-UP RJ45 www.pulseeng.com J1 Series Electrical Schematics J1006 J1011 3 RX+ RD+ 7 CT 6 RD- 5 TD- 2 2 TX- 1CT : 1 TRANSMIT PCB SIDE TO PHY PCB SIDE TO PHY TD- 2 6 RX- 1CT : 1 TRANSMIT 3 3 RX+ RD+ 7 CT 6 RD- 8 6 RX- 1CT : 1 TRANSMIT 75 4 N/C 4 2 TX- 1CT : 1 TRANSMIT CABLE SIDE CT 3 CABLE SIDE CT 1 TX+ TD+ 1 1 TX+ TD+ 1 4 75 4 5 75 5 7 7 0.001 µF N/C 5 CHS GROUND 8 5 75 C1 NOTE: Connect CHS GND to PCB ground. NOTE: Connect CHS GND to PCB ground. J1012 J1026 2 CT 2 TX- RD+ 4 3 RX+ CT 5 RD- 6 6 RX- 1CT : 1 RECEIVE 3 TD- 2 PCB SIDE TO PHY 1CT : 1 TRANSMIT CABLE SIDE PCB SIDE TO PHY TD- 3 1 TX+ TD+ 1 2 TX- 1CT : 1CT TRANSMIT RD+ 7 CT 3 RX+ 6 RD- 8 1CT : 1CT RECEIVE 4 75 75 4 5 75 75 4 75 75 7 8 0.001 µF 8 75 CHS GROUND 5 C1 NOTE: Connect CHS GND to PCB ground. LED = P 9 10 12 11 LED = L or R Left LED Right LED 9 10 12 11 Left LED Right LED 5 7 C1 CHS GROUND 6 RX- CABLE SIDE 1 TX+ TD+ 1 CT 8 75 8 NOTE: Connect CHS GND to PCB ground. LED = C or K 10 9 12 11 Left LED Standard LED Wavelength Forward* V(MAX) (TYP) Right LED Yellow Green 585 nm 565 nm 2.5 V 2.5 V 2.1 V 2.2 V * With a forward current of 20 mA US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 3 PRELIMINARY J402.P (10/02) PULSEJACK TM 1X1 Tab-UP RJ45 www.pulseeng.com JP Series Mechanicals LEFT LED RIGHT LED Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com PRELIMINARY J402.P (10/02) 4 PULSEJACK TM 1X1 Tab-UP RJ45 www.pulseeng.com JP Series Electrical Schematics JP006 JP011 CT 1 CT CT 6 RD- 5 PCB SIDE TO PHY 3 RX+ RD+ 4 6 RX- 1CT : 1 TRANSMIT 1 TD- 3 2 TX- 1CT : 1 TRANSMIT CABLE SIDE PCB SIDE TO PHY TD- 3 1 TX+ TD+ 2 2 TX- 1CT : 1 TRANSMIT 3 RX+ RD+ 4 CT 6 RD- 5 CABLE SIDE 1 TX+ TD+ 2 6 RX- 1CT : 1 TRANSMIT 75 4 4 75 5 75 7 5 7 8 75 0.001 µF 8 SHIELD NOTE: Connect CHS GND to PCB ground. JP026 1 TX+ TD+ 2 1 PCB SIDE TO PHY TD- 3 2 TX- 1CT : 1 TRANSMIT RD+ 4 3 RX+ CT 6 RD- 5 1CT : 1 RECEIVE 6 RX- CABLE SIDE CT 4 75 75 75 5 7 75 0.001 µF SHIELD 8 NOTE: Connect CHS GND to PCB ground. Standard LED Wavelength Forward* V (MAX) (TYP) Yellow Green Orange 585 nm 565 nm 610 nm 2.5 V 2.5 V 2.5 V 2.1 - 2.2 V 2.1 - 2.2 V 2.1 - 2.2 V * With a forward current of 20 mA US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 5 PRELIMINARY J402.P (10/02) PULSEJACK TM 1X1 Tab-UP RJ45 www.pulseeng.com Application Notes Advantages of the PulseJack Modules Increased Reliability Consistent Electrical and Magnetic Performance Pulse developed a patented method for ensuring the quality, consistency, and connection integrity of encapsulated coils and other three-dimensional electronic components. The InterLock Base consists of an internal plastic carrier that holds the coil firmly in place and provides precisely engineered “lead-channels” to lock together the lead wires and the leadframe pins. All of the InterLock Base interconnections are then simultaneously dip soldered, providing for both efficiency and uniformity for best common mode rejection and crosstalk. - With internal magnetics specifically oriented on all parts, there are more consistent readings on all functional tests. This is optimized for best crosstalk, common mode rejection and return loss. - With the selection of common mode material and winding techniques, common mode noise rejection maintains integrity at higher frequencies. - Multiple tabs around shield-to-ground, shield-to-chassis, and shunt noise to ground improves EMI suppression. Higher Manufacturing Yields Because of this Pulse patented higher reliability method, there is less of a chance of opens and shorts, thus providing higher yields. For More Information : UNITED STATES (Worldwide) UNITED KINGDOM (Northern Europe) FRANCE SINGAPORE (Southern Europe) (Southern Asia) TAIWAN, R.O.C. (Northern Asia) HONG KONG (China/Hong Kong) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 1 & 2 Huxley Road The Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 19/F, China United Plaza 1008 Tai Nan West Street Cheung Sha Wan, Kowloon Hong Kong, China TEL: 852 2788 6588 FAX: 852 2776 1055 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 287 8998 FAX: 65 280 0080 DISTRIBUTOR Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names metioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. ©2002, Pulse Engineering, Inc. 6 PRELIMINARY J402.P (10/02)