IS/ISO 9002 Lic# QSC/L-000019.3 Continental Device India Limited An IS/ISO 9002 and IECQ Certified Manufacturer P2N2369A NPN SILICON HIGH SPEED SWITHCHING TRANSISTOR TO - 92 Plastic Package C BE LOW POWER AND HIGH SPEED SWITCHING APPLICATIONS ABSOLUTE MAXIMUM RATINGS (Ta=25ºC unless specified otherwise) DESCRIPTION Collector Emitter Voltage Collector Base Voltage Collector Emitter Voltage ( VBE=0) Emitter Base Voltage Collector Current Peak Power Dissipation @ Ta=25ºC Operating And Storage Junction Temperature Range SYMBOL VALUE UNIT VCEO VCBO VCES VEBO ICM PD 15 40 40 4.5 500 625 V V V V mA mW Tj, Tstg -65 to +200 ºC Rth(j-a) 200 ºC/W THERMAL RESISTANCE Junction to Ambient in free air ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise) DESCRIPTION Collector Emitter Breakdown Voltage Collector Emitter Breakdown Voltage Collector Base Breakdown Voltage Emitter Base Breakdown Voltage Collector Cutoff Current Collector Cutoff Current Base Current Collector Emitter Saturation Voltage Continental Device India Limited SYMBOL BVCEO (sus) * BVCES BVCBO BVEBO ICBO ICES IB VCE(sat)* TEST CONDITION IC=10mA, IB=0 IC=10µA, VBE=0 IC=10µA, IE=0 IE=10µA, IC=0 VCB=20V, IE=0 Ta=150ºC VCE=20V, VBE=0 VCE=20V, VBE=0 IC=10mA, IB=1mA IC=30mA, IB=3mA IC=100mA, IB=10mA IC=10mA, IB=1mA Ta=125ºC Data Sheet VALUE MIN MAX 15 40 40 4.5 30 0.4 0.4 0.20 0.25 0.5 0.3 UNIT V V V V µA µA µA V V V V Page 1 of 4 P2N2369A NPN SILICON HIGH SPEED SWITHCHING TRANSISTOR TO - 92 Plastic Package C BE ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise) DESCRIPTION Base Emitter Saturation Voltage DC Current Gain SYMBOL VBE(sat) * hFE* TEST CONDITION IC=10mA, IB=1mA IC=30mA, IB=3mA IC=100mA, IB=10mA IC=10mA, IB=1mA Ta=+125ºC IC=10mA, IB=1mA Ta= -55ºC IC=10mA, VCE=1V IC=10mA, VCE=1V Ta= -55ºC IC=30mA, VCE=0.4V IC=100mA, VCE=1V IC=10mA, VCE=0.35v VALUE MIN MAX 0.7 0.85 0.15 1.60 0.59 V V V V 1.02 40 UNIT V 120 20 30 20 40 120 DYNAMIC CHARACTERISTICS Output Capacitance Transition Frequency Cob fT IE=0, VCB=5V f=140KHz VCE =10V,IC=10mA 4 500 pF MHz f=100MHZ SWITCHING CHARCTERISTICS Turn on Time ton Turn off Time toff Storage Time ts IC=10mA, IB1=3mA, IB2=1.5mA, VCC=3V IC=10mA, IB1=3mA, VCC=3V,IB2=1.5mA IC=100mA, IB1=10mA, IB2= 10mA, VCC =10V 12 ns 15 ns 13 ns *Pulse Condition: Width < 300µ µ s, Duty Cycle < 2%. Continental Device India Limited Data Sheet Page 2 of 4 P2N2369A TO - 92 Plastic Package TO-92 Plastic Package TO-92 Transistors in Tape and Ammo Pack Mechanical Data h T (p) P h h1 Ammo Pack Style h1 Adhesive Tape on Top Side A1 H3 H2 C1 H1 ED A Wo L Flat side Label W2 C2 Ho Carrier Strip W F2 L F1 Do 332 F P2 ( 1. 43 7") Po All dimensions in mm 1 K 2 D 3 D A A 3 2 1 SEC AA G DIM C 3 2 1 H F F MAX. A 4.32 5.33 B 4.45 5.20 C D 3.18 0.41 4.19 0.55 E F 0.35 0.50 5 DEG G H K L PIN CONFIGURATION 1. EMITTER 2. BASE 3. COLLECTOR MIN. 1.14 1.14 12.70 1.982 1.40 1.53 — 2.082 SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS A1 A T P Po COMPONENT ALIGNMENT SIDE VIEW COMPONENT ALIGNMENT FRONT VIEW TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCE STAND OFF CLINCH HEIGHT LEAD PARALLELISM PULL - OUT FORCE ") (13 Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack SPECIFICATION ITEM E Beyond 'L' 186 (7.3") W1 t1 t Solderability Ensured FE A Uncontrolled Dimension With 'L' B MIN. NOM. MAX. 4.0 4.8 3.9 REMARKS TOL . 4.8 5.2 4.2 12.7 12.7 ± 1.0 ± 0.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH P2 6.35 ± 0.4 TO BE MEASURED AT BOTTOM OF CLINCH F 5.08 h h1 W Wo W1 0 0 18 6 9 + 0.6 - 0.2 W2 Ho H1 L Do t F1, F2 0.5 16 H2 H3 | C1 - C2 | (P) 1.0 1.3 AT TOP OF BODY AT TOP OF BODY ± 0.5 ± 0.2 + 0.7 - 0.5 ± 0.2 ± 0.5 23.25 11.0 4 ± 0.2 1.2 2.54 0.45 1.45 3.0 0.22 t1 0.3-0.6 + 0.4 - 0.1 6N NOTES 1. Maximum alignment deviation between leads will not to be greater than 0.2mm. 2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. 3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. 4. There will be no more than three (3) consecutive missing components in a tape. 5. A tape trailer, having at least three feed holes are provided after the last component in a tape. 6. Splices should not interfere with the sprocket feed holes. All diminsions in mm. Packing Detail PACKAGE STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size Qty Gr Wt TO-92 Bulk 1K/polybag 200 gm/1K pcs 3" x 7.5" x 7.5" 5K 17" x 15" x 13.5" 80K 23 kgs TO-92 T&A 2K/ammo box 645 gm/2K pcs 12.5" x 8" x 1.8" 2K 17" x 15" x 13.5" 32K 12.5 kgs Continental Device India Limited Data Sheet Page 3 of 4 Notes P2N2369A TO - 92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 e-mail [email protected] www.cdil.com P2N2369ARev270302D Continental Device India Limited Data Sheet Page 4 of 4