Features and Benefits Electrical Voltage: 50V Current: 0.5A Contact Resistance: 20mΩ max. and strain relief for SMT tails Dielectric Withstanding Voltage: 250V AC/1 min. ■ For XX90 packaging, component is centered relative to the Insulation Resistance: 50 MΩ min. sprocket hole; for XX92, actuator is centered relative to the sprocket hole Physical Housing: 4/6 nylon, UL 94V-0 Reference Information Actuator: PPS, UL 94V-0 Packaging: Embossed tape Contact: Phosphor Bronze Designed In: Millimeters Plating: Tin Solder Tabs: Phosphor Bronze, Tin plating Temperature: -20 to +85˚C ■ Sizes 6 to 40 circuits ■ For 0.30mm thick FFC/FPC ■ Metal solder tabs provide PCB hold-down 0.50mm (.020") Pitch FFC/FPC Connector 52559 Vertical, SMT, ZIF FFC/FPC Connectors FEATURES AND SPECIFICATIONS F ORDERING INFORMATION AND DIMENSIONS Circuits Order No. 6 8 10 13 14 15 16 17 18 20 22 24 25 28 30 32 40 52559-0692 52559-0890 52559-1092 52559-1390 52559-1490 52559-1592 52559-1690 52559-1792 52559-1890 52559-2090 52559-2290 52559-2492 52559-2590 52559-2892 52559-3092 52559-3292 52559-4092 A 8.70 (.343) 9.70 (.382) 10.70 (.421) 12.20 (.480) 12.70 (.500) 13.20 (.520) 13.70 (.539) 14.20 (.559) 14.70 (.579) 15.70 (.618) 16.70 (.657) 17.70 (.697) 18.20 (.717) 19.70 (.776) 20.70 (.815) 21.70 (.854) 25.70 (1.012) Dimension B 2.50 (.098) 3.50 (.138) 4.50 (.177) 6.00 (.236) 6.50 (.256) 7.00 (.276) 7.50 (.295) 8.00 (.315) 8.50 (.335) 9.50 (.374) 10.50 (.413) 11.50 (.453) 12.00 (.472) 13.50 (.531) 14.50 (.571) 15.50 (.610) 19.50 (.768) C 7.90 (.311) 8.90 (.350) 9.90 (.390) 11.40 (.449) 11.90 (.469) 12.40 (.488) 12.90 (.508) 13.40 (.528) 13.90 (.547) 14.90 (.587) 15.90 (.625) 16.90 (.665) 17.40 (.685) 18.90 (.744) 19.90 (.783) 20.90 (.823) 24.90 (.980) Carrier Tape Width 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 32.00 32.00 32.00 32.00 32.00 44.00 (.945) (.945) (.945) (.945) (.945) (.945) (.945) (.945) (.945) (.945) (.945) (1.260) (1.260) (1.260) (1.260) (1.260) (1.732) Note: For cable specification dimensions, see cable pages at end of section 990 F-7