Revised March 1999 74LVX125 Low Voltage Quad Buffer with 3-STATE Outputs General Description Features The LVX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems. ■ Input voltage level translation from 5V to 3V ■ Ideal for low power/low noise 3.3V applications ■ Guaranteed simultaneous switching noise level and dynamic threshold performance Ordering Code: Order Number Package Number 74LVX125M M14A 74LVX125SJ M14D 74LVX125MTC Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Logic Symbol IEEE/IEC Truth Table Inputs Pin Descriptions Pin Names OEn Description An Inputs OEn Output Enable Inputs On Outputs © 1999 Fairchild Semiconductor Corporation Output An On L L L L H H H X Z H = HIGH Voltage Level L = LOW Voltage Level Z = High Impedance X = Immaterial DS012007.prf www.fairchildsemi.com 74LVX125 Low Voltage Quad Buffer with 3-STATE Outputs February 1994 74LVX125 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) −0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current Supply Voltage (VCC) (IIK) VI = −0.5V −20 mA −0.5V to +7.0V DC Input Voltage (VI) 2.0V to 3.6V Input Voltage (VI) 0V to 5.5V Output Voltage (VO) DC Output Diode Current (IOK) 0V to VCC −40°C to +85°C Operating Temperature (TA) VO = 0.5V −20 mA VO = VCC + 0.5V +20 mA Input Rise and Fall Time (∆t/∆V) −0.5V to VCC + 0.5V Output Voltage (VO) Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. ±25 mA DC Output Source/Sink Current (IO) DC VCC or Ground Current ±50 mA (ICC or IGND ) −65°C to +150°C Storage Temperature Range (TSTG) Power Dissipation 0 ns/V to 100 ns/V Note 2: Unused inputs must be held HIGH or LOW. They may not float. 180 mW DC Electrical Characteristics Symbol VIH VIL VOH VOL IOZ Parameter TA = 25°C VCC (V) Min TA = −40°C to +85°C Typ Max Min HIGH Level 2.0 1.5 1.5 Input Voltage 3.0 2.0 2.0 3.6 2.4 2.4 2.0 0.5 0.5 Input Voltage 3.0 0.8 0.8 3.6 0.8 0.8 HIGH Level 2.0 1.9 2.0 1.9 3.0 2.9 3.0 2.9 3.0 2.58 V VIN = VIL or V VIH IOH = −50 µA IOH = −50 µA IOH = −4 mA 2.48 VIN = VIL or IOL = 50 µA LOW Level 2.0 0.0 0.1 0.1 Output Voltage 3.0 0.0 0.1 0.1 3.0 0.36 0.44 3.6 ±0.25 ±2.5 µA 3.6 ±0.1 ±1.0 µA VIN = 5.5V or GND 3.6 4.0 40.0 µA VIN = VCC or GND 3-STATE Output V Input Leakage VIH IOL = 50 µA IOL = 4 mA VIN = VIH or VIL VOUT = VCC or GND Off-State Current IIN Conditions V LOW Level Output Voltage Units Max Current ICC Quiescent Supply Current Noise Characteristics Symbol (Note 3) VCC (V) Parameter TA = 25°C Typ Units Limit CL (pF) VOLP Quiet Output Maximum Dynamic VOL 3.3 0.3 0.8 V 50 VOLV Quiet Output Minimum Dynamic VOL 3.3 −0.3 −0.8 V 50 VIHD Minimum HIGH Level Dynamic Input Voltage 3.3 2.0 V 50 VILD Maximum LOW Level Dynamic Input Voltage 3.3 0.8 V 50 Note 3: Input tr = tf = 3 ns www.fairchildsemi.com 2 74LVX125 AC Electrical Characteristics Symbol Parameter tPLH Propagation Delay Time tPHL Data to Output tPZH Output Enable Time VCC (V) TA = +25°C TA = −40°C to +85°C Units Conditions Typ Max Min Max 2.7 5.8 10.1 1.0 13.5 8.3 13.6 1.0 17.0 3.3 ± 0.3 4.4 6.2 1.0 8.5 6.9 9.7 1.0 12.0 2.7 5.3 9.3 1.0 12.5 CL = 15 pF, RL = 1 kΩ 7.8 12.8 1.0 16.0 CL = 50 pF, RL = 1 kΩ 4.0 5.6 1.0 7.5 6.5 9.1 1.0 11.0 2.7 10.0 15.7 1.0 19.0 3.3 ± 0.3 8.3 11.2 1.0 13.0 tPZL 3.3 ± 0.3 Min tPHZ Output Disable tPLZ Time tOSHL Output to Output 2.7 1.5 1.5 tOSLH Skew (Note 4) 3.3 1.5 1.5 CL = 15 pF ns CL = 50 pF CL = 15 pF CL = 50 pF ns CL = 15 pF, RL = 1 kΩ CL = 50 pF, RL = 1 kΩ ns ns CL = 50 pF, RL = 1 kΩ CL = 50 pF, RL = 1 kΩ CL = 50 pF Note 4: Parameter guaranteed by design. tOSLH = |tPLHm − tPLHn|, tOSHL = |t PHLm − t PHLn| Capacitance Symbol TA = 25°C Parameter Min TA = −40°C to +85°C Typ Max 10 CIN Input Capacitance 4.0 CPD Power Dissipation 14 Min Units Max 10 pF pF Capacitance (Note 5) Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. 3 www.fairchildsemi.com 74LVX125 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Package Number M14A 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 4 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. 74LVX125 Low Voltage Quad Buffer with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued)