CD43__90 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724)925-7272 Description: OUTLINE DRAWING A C F G Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. H 7 6 3 2 "T" K 1 4 5 B J "U" THREAD "S" FASTON TAB L R D M P 5 7 Q CD43__90 Dual SCR Isolated TM POW-R-BLOK Module 90 Amperes / Up to 1600 Volts N 4 TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1600 Volts 6 1 2 3 ~ + - CONNECTION DIAGRAM CD43 Outline Dimensions Dimension Inches Millimeters A 3.62 92 B 0.81 20.5 C 3.15 80 D 1.18 30 F 0.59 15 G 0.79 20 H 0.79 20 J 0.16 4 K 0.23 5.8 L 0.61 15.5 M 1.14 29 N 0.24 6.1 P 0.94 24 Q 1.18 30 R 0.71 18 S 0.11 x .03 2.8 x 0.8 T 0.25 6.3 U M5 M5 Features: n n n n n Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Glass Passivated Chips DBC Alumina (Al2O3) Baseplate Low Thermal Impedance for Improved Current Capability n Quick Connect Gate Terminal with Provision for Keyed Mating Plug n UL Recognized (E78240) Benefits: Ordering Information Example: Select the complete eight digit module part number from the table below. Example: CD431690 is a 1600Volt, 90 Ampere Dual SCR Isolated TM POW-R-BLOK Module Type CD43 Voltage Volts (x100) Current Amperes (x 1) 08 12 14 16 90 n No Additional Insulation Components Required n Easy Installation n No Clamping Components Required n Reduce Engineering Time Applications: n n n n n n n n Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only. 07/10/2000 CD43__ 90 TM Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724)925-7272 POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1600 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive Peak Ten Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180° Conduction, TC=87°C IT(RMS) 140 A 180° Conduction, TC=87°C (AC Switch) IT(RMS) 200 A 180° Conduction, TC=87°C IT(AV) 90 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1570 A 60 Hz, No VRRM reapplied, Tj=125°C ITSM 1870 A 60 Hz, No VRRM reapplied, Tj=25°C ITSM 2100 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1500 A 50 Hz, No VRRM reapplied, Tj=125°C ITSM 1785 A 50 Hz, No VRRM reapplied, Tj=25°C ITSM 2000 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1210 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1155 A ITSM 960 A ITSM 940 60 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=125°C 2 A 2 8.3 ms, 100% VRRM reapplied, Tj=125°C It 10,270 A sec 8.3 ms, No VRRM reapplied, Tj=125°C It 2 14,520 A sec 8.3 ms, No VRRM reapplied, Tj=25°C It 2 18,300 A sec 10 ms, 100% VRRM reapplied, Tj=125°C 2 It 11,250 A sec 2 2 2 2 2 10 ms, No VRRM reapplied, Tj=125°C It 15,910 A sec 10 ms, No VRRM reapplied, Tj=25°C It 2 20,000 A sec Tj=25°C, IG=0.5 A, VD=0.67 VDRM (Rated), ITM=300A , Tr < 0.5 s, tp > 6 s di/dt 150 A/ s Peak Gate Power Dissipation Tp < 5 ms, Tj = 125C PGM 12 W Average Gate Power Dissipation F = 50 Hz, Tj = 125C PG(AV) 3 W Peak Forward Gate Current Tp < 5 ms, Tj = 125C IGFM 3 A Peak Reverse Gate Voltage Tp < 5 ms, Tj = 125C VGRM 10 V Operating Temperature TJ -40 to +125 °C Storage Temperature Tstg -40 to +125 °C 25 3 44 5 83 in.-Lb. Nm in.-Lb. Nm g 3 oz. 2500 3500 V V Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) T T Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together 50 – 60 Hz, 1 minute 50 – 60 Hz, 1 second Vrms Vrms 2 T 07/10/2000 CD43__90 TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724)925-7272 Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Repetitive Peak Forward Leakage Current IDRM Up to 1600V, TJ=125°C Repetitive Peak Reverse Leakage Current IRRM Peak On-State Voltage VFM Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 mA Up to 1600V, TJ=125°C 15 mA ITM=300A 1.58 V TJ = 125°C, I = 16.7% x IT(AV) to IT(AV) 0.80 2.40 V m 0.85 2.25 V m TJ = 125°C, I = IT(AV) to ITSM VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt A= B= C= D= 0.7160 2.17E-02 2.20E-03 1.58E-03 T dV/dt Linear to 2/3 VDRM Tj=125°C, Gate Open Circuit 500 Turn-Off Time (Typical) t off 40 - 100 Gate Trigger Current IGT TJ = 25°C, IT = 2A Vr = 50V, -dI/dt=10 A/ s Re-Applied dV/dt = 200V/ s, Linear to 900 V Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load Gate Trigger Voltage VGT Non-Triggering Gate Voltage VGDM Non-Triggering Gate Current Units 15 TJ = 125°C, I = 15% x IT(AV) to ITSM VTM Coefficients, Full Range Max. T T V/ s (Typical) Ts 270 mA 150 mA 80 mA Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load 4.0 Volts 2.5 Volts 1.7 Volts Tj=125°C, VD=VDRM 0.25 Volts IGDM Tj=125°C, VD=VDRM 6 mA Holding Current IH VD=6V, Resistive Load, Gate Open 200 mA Latching Current IL VD=6V, Resistive Load 400 mA Thermal Characteristics Characteristics Symbol Thermal Resistance, Junction to Case DC Operation R J-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients Z8J-C Z8J-C= K1 (1-exp(-t/ 1)) K1 = 6.48 E-3 + K2 (1-exp(-t/ 2)) + K3 (1-exp(-t/ 3)) K2 = 6.02 E-2 Thermal Resistance, Case to Sink Lubricated R C-S [ [ [ + K4 (1-exp(-t/[4)) Per Module K3 = 1.64 E-1 K4 = 3.94 E-2 Max. Units 0.135 0.270 °C/W °C/W [1 = 5.80 E-4 [2 = 1.70 E-2 [3 = 9.54 E-2 [4 = 3.53 E-1 0.1 °C/W 07/10/2000 CD43__90 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724)925-7272 Dual SCR Module 90 Amperes / Up to 1600 Volts Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 °C ) (Junction to Case) 0.30 4.0 3.5 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts 0.25 3.0 2.5 2.0 1.5 1.0 0.20 0.15 0.10 0.05 0.5 0.00 0.001 0.0 10 100 1000 0.01 0.1 10 (Sinusoidal Waveform) (Sinusoidal Waveform) 125 140 130 180° 120 Max. Case Temperature - Tcase -°C 120 120° 110 90° 100 60° 90 30° 80 15° 70 60 50 40 30 180 0 360 CONDUCTION ANGLE 20 115 180 0 110 360 CONDUCTION ANGLE 105 100 15° 95 30° 60° 90° 90 120° 10 180° 85 0 0 10 20 30 40 50 60 70 80 90 0 100 10 20 30 Maximum On-State Power Dissipation 50 60 70 80 90 100 Maximum Allowable Case Temperature (Rectangular Waveform) 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 40 Average On-State Current - It(av) - Amperes Average On-State Current - Itm(av) - Amperes (Rectangular Waveform) 125 270° 180° 120° 90° 60° 30° 0 120 360° Max. Case Temperature - Tcase -°C Max. Power Dissipation Per SCR - Watts 100 Maximum Allowable Case Temperature Maximum On-State Power Dissipation Max. Power Dissipation Per SCR - Watts 1 Time - t - Seconds Instantaneous On-State Current - Itm - Amperes 180 115 360 CONDUCTION ANGLE 105 100 95 30° 90 60° 90° 120° 85 180° 360 CONDUCTION ANGLE 180 0 110 270° 80 360° 75 0 10 20 30 40 50 60 70 80 90 100 110 Average On-State Current - It(av) - Amperes 120 130 140 150 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Average On-State Current - It(av) - Amperes 07/10/2000 150