PRELIMINARY Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 PD47__07 TM POW-R-BLOK Dual SCR / Diode Isolated Module 700 Amperes / Up to 1800 Volts Description: Powerex Dual SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. Features: TElectrically Isolated Heatsinking T Compression Bonded Elements T Metal Baseplate T Low Thermal Impedance for Improved Current Capability Benefits: TNo Additional Insulation Components Required TEasy Installation TNo Clamping Components Required T Reduce Engineering Time Applications: Ordering Information: Select the complete eight-digit module part number from the table below. Example: PD471807 is a 1800 Volt, 700A Average SCR/Diode Isolated TM POW-R-BLOK Module Type PD42 T Bridge Circuits TAC & DC Motor Drives TMotor Soft Starters TBattery Supplies TPower Supplies TLarge IGBT Circuit Front Ends Current Voltage Volts (x100) Amperes (x100) 12 14 16 18 07 10/04/2002 PRELIMINARY Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 PD47__07 TM POW-R-BLOK Dual SCR / Diode Isolated Module 700 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Repetitive Peak Forward and Reverse Blocking Voltage Symbol Units VDRM & VRRM Up to 1800 V VRSM VRRM + 100V V 180° Conduction, TC=74° C 180° Conduction, TC=78° C 180° Conduction, TC=82° C 180° Conduction, TC=86° C IT(RMS) IT(RMS) IT(RMS) IT(RMS) 1775 1665 1550 1440 A A A A 180° Conduction, TC=74° C 180° Conduction, TC=78° C 180° Conduction, TC=82° C 180° Conduction, TC=86° C IT(RMS) IT(RMS) IT(RMS) IT(RMS) 1256 1178 1100 1020 A A A A 180° Conduction, TC=74° C 180° Conduction, TC=78° C 180° Conduction, TC=82° C 180° Conduction, TC=86° C IT(AV) IT(AV) IT(AV) IT(AV) 800 750 700 650 A A A A Peak One Cycle Surge Current, Non-Repetitive Tj = 25C, Vr = 0 Peak One Cycle Surge Current, Non-Repetitive Tj = 25C, Vr = Vrrm Peak One Cycle Surge Current, Non-Repetitive Tj = 125C, Vr = 0 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz ITSM ITSM ITSM ITSM ITSM ITSM 69,000 63,000 46,000 42,000 60,000 54,750 A A A A A A Peak One Cycle Surge Current, Non-Repetitive Tj = 125C, Vr = Vrrm 60 Hz 50 Hz ITSM ITSM 40,000 36,500 A A A Non-Repetitive Peak Blocking Voltage (t < 5 msec) RMS Current AC Switch Configuration o (180 Conduction) RMS Current Per SCR o (180 Conduction) Average Forward Current Per SCR o (180 Conduction) Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, Tj = 125C, Vr = Vrrm ITSM 32,100 Peak Ten Cycle Surge Current, Non-Repetitive 60 Hz, Tj = 125C, Vr = Vrrm ITSM 25,200 8.3 milliseconds 10 milliseconds 2 It Per JEDEC Standard 397 5.2.2.6 di/dt Per JEDEC Standard 397 5.2.2.6 di/dt 2 I t for Fusing for One Cycle Tj = 125C, Vr = Vrrm Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Maximum Rate-of-Rise of On-State Current, (Repetitive) Operating Temperature Storage Temperature It 2 6.66 x 10 400 A sec 6 A sec 2 A/µs 150 A/µs TJ -40 to +125 °C Tstg -40 to +150 °C 132 15 106 12 455 in. – Lb. Nm in. – Lb. Nm g 11.75 lb 3000 V Max. Mounting Torque, M6 Mounting Screw Max. Mounting Torque, M10 Terminal Screw Module Weight, Typical V Isolation @ 25C 6.60 x 10 A 2 6 Vrms 10/04/2002 PD47__07 PRELIMINARY Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 TM POW-R-BLOK Dual SCR / Diode Isolated Module 700 Amperes / Up to 1800 Volts Electrical Characteristics, TJ=25° C unless otherwise specified Characteristics Symbol Test Conditions Min. Max. Units Repetitive Peak Forward Leakage Current IDRM Up to 1800V, TJ=125° C 100 mA Repetitive Peak Reverse Leakage Current IRRM Peak On-State Voltage VTM Up to 1800V, TJ=125° C 100 mA ITM=3000A, TJ=125° C 1.30 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125° C, I = 15%IT(AV) to πIT(AV) 0.703 0.184 V mΩ Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 125° C, I = πIT(AV) to ITSM 1.01 0.117 V mΩ TJ = 125° C, I = 50A to 6kA VTM Coefficients, Full Range VTM = A+ B Ln I +C I + D Sqrt I A= B= C= D= 0.7999 -4.62 E-02 7.33 E-05 1.10 E-02 dV/dt Exponential to 0.67VDRM Tj=125° C, Gate Open 600 V/µs Typical Diode Reverse Recovery Time TRR Tj=25° C, IF=1500A, dIR /dt = 25A/µs, TP= 190 µs 22 Typ. µs Gate Trigger Current IGT Tj=25° C, VD=12V Minimum dV/dt Gate Trigger Voltage Non-Triggering Gate Voltage Holding Current Peak Forward Gate Current Peak Reverse Gate Voltage Maximum Average Gate Power Dissipation 200 mA VGT Tj=25° C, VD=12V 3.0 Volts VGDM Tj=125° C, VD= ½ VDRM 0.15 Volts IH 300 mA IGTM 4.0 Amp VGRM 5 Volts PGM (AVE) 16 Watts Thermal Characteristics Characteristics Symbol Thermal Resistance, Junction to Case RΘJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients ZΘJ-C ZΘJ-C= K1 (1-exp(-t/t1)) Thermal Resistance, Case to Sink Lubricated RΘC-S Max. Units 0.029 0.058 ° C/W ° C/W + K2 (1-exp(-t/t2)) K1 = 5.04 E-04 t1 = 2.47 E-03 K2 = 2.31 E-03 t2 = 4.42 E-02 + K3 (1-exp(-t/t3)) K3 = 2.83 E-03 + K4 (1-exp(-t/t4)) K4 =5.24 E-02 Per Module t3 = 1.370 t4 = 9.668 0.009 ° C/W 10/04/2002 PRELIMINARY PD47__07 Dual SCR / Diode Module Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 700 Amperes / Up to 1800 Volts Maximum Transient Thermal Impedance Typical On-State Forward Voltage Drop (Junction To Case) 3 0.06 2.5 0.05 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts (Tj = 125C) 2 1.5 1 0.5 0.04 0.03 0.02 0.01 0 10 100 1000 0.00 0.001 10000 0.01 0.1 Instantaneous On-State Current - Itm - Amperes 1 10 100 Time - t - Seconds Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Sinusoidal Waveform) (Sinusoidal Waveform) 1000 130 120° 800 180° 90° 700 60° 600 500 30° 15° 400 300 180 0 200 360 CONDUCTION ANGLE Max. Case Temperature - Tcase -°C_ Max. Power Dissipation Per SCR - Watts_ 900 120 110 180 0 100 15° 30° 90 60° 90° 80 100 120° 180° 70 0 0 100 200 300 400 500 600 700 0 800 100 200 300 400 500 600 700 800 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Rectangular Waveform) (Rectangular Waveform) 1400 130 360° 1200 Max. Case Temperature - Tcase -°C_ Max. Power Dissipation Per SCR - Watts_ 360 CONDUCTION ANGLE 270° 1000 180° 120° 800 60° 600 90° 30° 15° 400 200 0 180 360 CONDUCTION ANGLE 120 110 180 0 360 CONDUCTION ANGLE 100 15° 90 30° 60° 80 90° 120° 70 180° 270° 360° 60 50 0 0 200 400 600 800 1000 1200 Average On-State Current - It(av) - Amperes 1400 0 200 400 600 800 1000 1200 1400 Average On-State Current - It(av) - Amperes 10/04/2002 PRELIMINARY Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 PD47__07 Dual SCR / Diode Module 700 Amperes / Up to 1800 Volts 10/04/2002