Numeric Display 3 Digit 11.0mm (.4”) Series Terminal Connection 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 a g f D1 d e b c dp1 D2 dp2 D3 dp3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 Common Anode D1 Common Cathode D1 4 Cathode c1 Anode c1 5 Cathode dp1 Anode dp1 6 Cathode e2 Anode e2 7 Cathode d2 Anode d2 8 Common Anode D2 Common Cathode D2 9 Cathode c2 Anode c2 33.0 11.0 11.0 10° 10 Cathode dp2 Anode dp2 11 Cathode e3 Anode e3 12 Cathode d3 Anode d3 13 Common Anode D3 Common Cathode D3 14 Cathode c3 Anode c3 15 Cathode dp3 Anode dp3 16 Cathode b3 Anode b3 17 Cathode a3 Anode a3 18 Common Anode D3 Common Cathode D3 19 Cathode f3 Anode f3 20 Cathode g3 Anode g3 21 Cathode g2 Anode g2 22 Cathode b2 Anode b2 23 Cathode a2 Anode a2 24 Common Anode D2 Common Cathode D2 25 Cathode f2 Anode f2 26 Cathode g1 Anode g1 27 Cathode b1 Anode b1 28 Cathode a1 Anode a1 29 Common Anode D1 Common Cathode D1 30 Cathode f1 Anode f1 7.0 *12.5 Anode d1 0.3 Cathode d1 16.0 2 6.0 LN534RAMR ····· LNM234AA01 ····· Red LN534RKMR ····· LNM234KA01 ····· Red LN534GAMG ···· LNM334AA01 ····· Green LN534GKMG ···· LNM334KA01 ····· Green Assignment Anode e1 3 – φ 1.4 4.3 6.5 Lighting Color 0.5 *2.0 5.0 ± 0.5 Global Part No. 11.0 Conventional Part No. Unit: mm Pin Assignment No. 1 Cathode e1 2.0 × 14.0 = 28.0 Lead wire dimension ■ Absolute Maximum Ratings (Ta = 25°C) Lighting Color Red Green PD(mW) 60 60 IFP(mA)∗ 100 100 IF(mA) 20 20 VR(V) 5 3 Topr(°C) −25 ∼ +80 −25 ∼ +80 Tstg(°C) −30 ∼ +85 −30 ∼ +85 Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec ■ Electro−Optical Characteristics (Ta = 25°C) Conventional Lighting Part No. Color LN534RAMR Red LN534RKMR Red LN534GAMG Green LN534GKMG Green Unit − Common Anode Cathode Anode Cathode − IO IO /d.p IF Typ Min Typ 5 450 150 150 5 450 150 150 10 1500 500 500 10 1500 500 500 µcd µcd µcd mA IO IF Typ 2.2 2.2 2.2 2.2 V VF Max 2.8 2.8 2.8 2.8 V λP Typ 700 700 565 565 nm ∆λ Typ 100 100 30 40 nm IF VF 10000 IF 20 20 20 20 mA IR Max 10 10 10 10 µA VR 5 5 5 5 V IF Ta 100 3000 30 1000 R AM R 4R M 53 4RK N 3 L 5 LN 500 300 100 1 3 5 10 30 Forward Current 316 40 Forward Current 50 Forward Current 5000 L LN N53 53 4G 4G AM KM G G Luminous Intensity 50 10 5 3 50 100 1 30 20 10 1.6 1.8 2.0 2.2 Forward Voltage 2.4 0 0 20 40 60 80 Ambient Temperature 100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR