ETC LN526GK(LNM326KA01)

Numeric Display
2 Digit 14.4mm (.6”) Series
Unit: mm
25.1 ± 0.25
Lighting Color
18 17 16 15 14 13 12 11 10
a
f
b
c
g
e
D1
d
1
2
3
D2
dp
4
5
6
7
8
9
6.5
*15.24 ± 0.38
Pin
Assignment
No.
1
Cathode e1
Assignment
Anode e1
2
Cathode d1
Anode d1
3
Cathode c1
Anode c1
4
Cathode dp1
Anode dp1
5
Cathode e2
Anode e2
6
Cathode d2
Anode d2
7
Cathode g2
Anode g2
8
Cathode c2
Anode c2
9
Cathode dp2
Anode dp2
8.0
0.5
10
Cathode b2
Anode b2
11
Cathode a2
Anode a2
12
Cathode f2
Anode f2
13
Common Anode D2
Common Cathode D2
14
Common Anode D1
Common Cathode D1
15
Cathode b1
Anode b1
16
Cathode a1
Anode a1
17
Cathode g1
Anode g1
18
Cathode f1
Anode f1
0.3
Terminal Connection
12.5
10°
Red
Red
Green
Green
19.0 ± 0.25
LN526RA ·················· LNM226AA01 ··········
LN526RK ·················· LNM226KA01 ··········
LN526GA ·················· LNM326AA01 ··········
LN526GK ·················· LNM326KA01 ··········
2 – φ 1.8
4.5
8.0 ± 0.25
3.5 Min
Global Prat No.
14.4
Conventional Part No.
*2.54 ± 0.1
2.54 × 8.0 = 20.32
Lead wire dimension
■ Absolute Maximum Ratings (Ta = 25°C)
Lighting Color
Red
Green
PD(mW)
60
60
IFP(mA)∗
100
100
IF(mA)
20
20
VR(V)
5
5
Topr(°C)
−25 ∼ +80
−25 ∼ +80
Tstg(°C)
−30 ∼ +85
−30 ∼ +85
Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
■ Electro−Optical Characteristics (Ta = 25°C)
Conventional Lighting
Part No.
Color
LN526RA
Red
LN526RK
Red
LN526GA
Green
LN526GK
Green
Unit
−
Common
Anode
Cathode
Anode
Cathode
−
IO
IO /d.p
IF
Typ Min Typ
5
600 250 250
5
600 250 250
10
1500 500 500
10
1500 500 500
µcd µcd µcd mA
IO  IF
Typ
2.2
2.2
2.2
2.2
V
λP
Typ
700
700
565
565
nm
VF
Max
2.8
2.8
2.8
2.8
V
∆λ
Typ
100
100
30
30
nm
IF  VF
10000
IF
20
20
20
20
mA
IR
Max
10
10
10
10
µA
VR
5
5
5
5
V
IF  Ta
100
25
50
6RA
LN52 6RK
LN52
1000
500
300
100
1
20
30
Forward Current
3000
Forward Current
L
LN N52
52 6G
6G A
K
Luminous Intensity
5000
10
5
3
3
5
10
30
Forward Current
50
100
1
15
10
5
1.6
1.8
2.0
2.2
Forward Voltage
2.4
0
0
20
40
60
80
100
Ambient Temperature
307
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR