Revised March 2002 NC7SZ04 TinyLogic UHS Inverter General Description Features The NC7SZ04 is a single inverter from Fairchild’s Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. ■ Space saving SOT23 or SC70 5-lead package ■ Ultra small MicroPak leadless package ■ Ultra High Speed; tPD 2.4 ns typ into 50 pF at 5V VCC ■ High Output Drive; ±24 mA at 3V VCC ■ Broad VCC Operating Range; 1.65V to 5.5V ■ Matches the performance of LCX when operated at 3.3V VCC ■ Power down high impedance inputs/output ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Code: Order Package Product Code Number Number Top Mark NC7SZ04M5X MA05B 7Z04 5-Lead SOT23, JEDEC MO-178, 1.6mm NC7SZ04P5X MAA05A Z04 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SZ04L6X MAC06A CC 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Logic Symbol Supplied As 3k Units on Tape and Reel Connection Diagrams IEEE/IEC Pin Assignments for SC70 Pin Descriptions Pin Names Description (Top View) A Input Y Output NC No Connect Pad Assignments for MircoPak Function Table Y=A Input Output A Y L H H L (Top Thru View) H = HIGH Logic Level L = LOW Logic Level TinyLogic and MicroPak are trademarks of Fairchild Semiconductor Corporation. © 2002 Fairchild Semiconductor Corporation DS012163 www.fairchildsemi.com NC7SZ04 TinyLogic UHS Inverter October 1996 NC7SZ04 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) Supply Voltage (VCC ) −0.5V to +6V DC Input Voltage (VIN) −0.5V to +6V Supply Voltage Operating (VCC) DC Output Voltage (VOUT) −0.5V to +6V Supply Voltage Data Retention (VCC) DC Input Diode Current (IIK) 1.65V to 5.5V 1.5V to 5.5V Input Voltage (VIN) 0V to 5.5V @VIN < −0.5V −50 mA Output Voltage (VOUT) @ VIN > 6V +20 mA Operating Temperature (TA) DC Output Diode Current (IOK) 0V to VCC −40°C to +85°C Input Rise and Fall Time (tr, tf) @VOUT < −0.5V −50 mA VCC = 1.8V, 2.5V ± 0.2V 0 ns/V to 20 ns/V @ VOUT > 6V, VCC = GND +20 mA VCC = 3.3V ± 0.3V 0 ns/V to 10 ns/V DC Output Current (IOUT) ±50 mA VCC = 5.0V ± 0.5V 0 ns/V to 5 ns/V DC VCC/GND Current (ICC/IGND) ±50 mA Thermal Resistance (θJA) −65°C to +150 °C Storage Temperature (TSTG) 150 °C Junction Temperature under Bias (TJ) Junction Lead Temperature (TL) SOT23–5 300°C/W SC70–5 425°C/W SOT23–5 200 mW Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. SOT70–5 150 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. 260 °C (Soldering, 10 seconds) Power Dissipation (PD) @ +85°C DC Electrical Characteristics Symbol Parameter TA = +25°C VCC (V) Min VIH HIGH Level Input Voltage 1.65 to 1.95 0.75 VCC VIL LOW Level Input Voltage 1.65 to 1.95 VOH HIGH Level Output Voltage 2.3 to 5.5 Typ LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com Min Max 0.75 VCC 0.7 VCC 0.25 VCC 0.25 VCC 0.3 VCC 0.3 VCC 1.65 1.55 1.65 1.8 1.7 1.8 1.7 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 Units Conditions V 0.7 VCC 2.3 to 5.5 VOL TA = −40°C to +85°C Max V V 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 3.0 2.4 2.80 2.4 3.0 2.3 2.68 2.3 4.5 3.8 4.20 3.8 VIN = VIL IOH = −100 µA IOH = −4 mA IOH = −8 mA IOH = −16 mA V IOH = −24 mA IOH = −32 mA 1.65 0.0 0.1 0.1 1.8 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 V VIN = VIH IOL = 100 µA 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.24 IOL = 4 mA 2.3 0.10 0.3 0.3 IOL = 8 mA 0.15 0.4 0.4 3.0 0.22 0.55 0.55 4.5 0.22 0.55 0.55 ±1 ±10 µA 0 ≤ VIN ≤ 5.5V 0.0 1 10 µA VIN or VOUT = 5.5V 1.65 to 5.5 2.0 20 µA VIN = 5.5V, GND 0 to 5.5 2 V IOL = 16 mA 3.0 IOL = 24 mA IOL = 32 mA Symbol tPLH Parameter Propagation Delay tPHL tPLH Propagation Delay tPHL CIN Input Capacitance CPD Power Dissipation Capacitance TA = +25°C VCC TA = −40°C to +85°C (V) Min Typ Max Min Max 1.65 2.0 5.3 11.4 2.0 12.0 1.8 2.0 4.4 9.5 2.0 10 2.5 ± 0.2 0.8 2.9 6.5 0.8 7.0 3.3 ± 0.3 0.5 2.1 4.5 0.5 4.7 5.0 ± 0.5 0.5 1.8 3.9 0.5 4.1 3.3 ± 0.3 1.5 2.9 5.0 1.5 5.2 5.0 ± 0.5 0.8 2.4 4.3 0.8 4.5 0 4 3.3 20 5.0 26 Units ns Conditions CL = 15 pF RL = 1 MΩ ns CL = 50 pF Figure Number Figures 1, 3 RL = 500Ω Figures 1, 3 (Note 3) Figure 2 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (V CC) (fIN) + (ICC static) AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz, tW = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SZ04 AC Electrical Characteristics NC7SZ04 Tape and Reel Specification TAPE FORMAT FOR SOT23, SC70 Package Tape Designator M5X, P5X Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM Ko 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) (1.35 ± 0.10) 0.138 ± 0.002 0.055 ± 0.004 (3.5 ± 0.05) 4 (1.4 ± 0.11) DIM P1 DIM W 0.157 0.315 ± 0.004 (4) (8 ± 0.1) 0.157 0.315 ± 0.012 (4) (8 ± 0.3) TAPE FORMAT FOR MicroPak Package Designator L6X (Continued) Tape Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) 5 www.fairchildsemi.com NC7SZ04 Tape and Reel Specification NC7SZ04 Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) www.fairchildsemi.com 6 NC7SZ04 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B 7 www.fairchildsemi.com NC7SZ04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A www.fairchildsemi.com 8 NC7SZ04 TinyLogic UHS Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 9 www.fairchildsemi.com