ETC NC7SZ32P5

Revised January 2001
NC7SZ32
TinyLogic UHS 2-Input OR Gate
General Description
Features
The NC7SZ32 is a single 2-Input OR Gate from Fairchild’s
Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra
high speed with high output drive while maintaining low
static power dissipation over a very broad VCC operating
range. The device is specified to operate over the 1.65V to
5.5V VCC range. The inputs and output are high impedance
when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage.
■ Space saving SOT23 or SC70 5-lead package
■ Ultra high speed tPD 2.4 ns Typ into 50 pF at 5V VCC
■ High output drive ±24 mA at 3V VCC
■ Broad VCC operating range 1.65V–5.5V
■ Matches the performance of LCX when operated at
3.3V VCC
■ Power down high impedance inputs/output
■ Overvoltage tolerant inputs facilitate 5V–3V translation
■ Patented noise/EMI reduction circuitry implemented
Ordering Code:
Package
Product Code
Number
Top Mark
NC7SZ32M5
MA05B
7Z32
5-Lead SOT23, JEDEC MO-178, 1.6mm
NC7SZ32M5X
MA05B
7Z32
5-Lead SOT23, JEDEC MO-178, 1.6mm
3k Units on Tape and Reel
NC7SZ32P5
MAA05A
Z32
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
250 Units on Tape and Reel
NC7SZ32P5X
MAA05A
Z32
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3k Units on Tape and Reel
Order Number
Package Description
Logic Symbol
Supplied As
250 Units on Tape and Reel
Connection Diagram
IEEE/IEC
(Top View)
Pin Descriptions
Function Table
Pin Names
Description
A, B
Inputs
Y
Output
Y=A+B
Input
Output
A
B
L
L
Y
L
L
H
H
H
L
H
H
H
H
H = HIGH Logic Level
L = LOW Logic Level
TinyLogic is a trademark of Fairchild Semiconductor Corporation.
© 2001 Fairchild Semiconductor Corporation
DS012154
www.fairchildsemi.com
NC7SZ32 TinyLogic UHS 2-Input OR Gate
September 1996
NC7SZ32
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 2)
Supply Voltage (VCC)
−0.5Vto +6V
DC Input Voltage (VIN)
−0.5V to +6V
Supply Voltage Operating (VCC)
1.65V to 5.5
DC Output Voltage (VOUT)
−0.5V to +6V
Supply Voltage Data Retention (VCC)
1.5V to 5.5V
DC Input Diode Current (IIK)
Input Voltage (VIN)
0V to 5.5V
@VIN < −0.5V
−50 mA
Output Voltage (VOUT)
@VIN >6V
+20 mA
Operating Temperature (TA)
DC Output Diode Current (IOK)
0V to VCC
−40°C to +85°C
Input Rise and Fall Time (tr, tf)
@VOUT< −0.5V
−50 mA
VCC = 1.8V, 2.5V ± 0.2V
0 ns/V to 20 ns/V
@VOUT >6V, (VCC = GND)
+20 mA
VCC = 3.3V ± 0.3V
0 ns/V to 10 ns/V
VCC = 5.0V ± 0.5V
0 ns/V to 5 ns/V
DC Output Current (IOUT)
±50 mA
DC VCC/GND Current (ICC/IGND)
±50 mA
Thermal Resistance (θJA)
−65°C to +150°C
Storage Temperature (TSTG)
150°C
Junction Temperature under Bias (TJ)
Junction Lead Temperature (TL);
SOT23-5
300°C/W
SC70-5
425°C/W
SOT23-5
200 mW
Note 1: Absolute Maximum Ratings are DC values beyond which the
device may be damaged or have its useful life impaired. The datasheet
specifications should be met, without exception, to ensure that the system
design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet
specifications.
SC70-5
150 mW
Note 2: Unused inputs must be held HIGH or LOW. They may not float.
260°C
Soldering, 10 seconds
Power Dissipation (PD) @ +85°C
DC Electrical Characteristics
Symbol
Parameter
TA = +25°C
VCC
(V)
Min
VIH
HIGH Level Input Voltage
1.65 to 1.95 0.75 VCC
VIL
LOW Level Input Voltage
1.65 to 1.95
VOH
HIGH Level Output Voltage
2.3 to 5.5
Typ
LOW Level Output Voltage
IIN
Input Leakage Current
IOFF
Power Off Leakage Current
ICC
Quiescent Supply Current
www.fairchildsemi.com
Min
Max
0.75 VCC
0.7 VCC
0.25 VCC
0.3 VCC
0.3 VCC
1.65
1.55
1.65
1.55
1.8
1.7
1.8
1.7
2.3
2.2
2.3
2.2
3.0
2.9
3.0
2.9
4.5
4.4
4.5
4.4
1.65
1.29
1.52
1.29
2.3
1.9
2.15
1.9
3.0
2.4
2.80
2.4
3.0
2.3
2.68
2.3
4.5
3.8
4.20
3.8
Units
Conditions
V
0.7 VCC
0.25 VCC
2.3 to 5.5
VOL
TA = −40°C to +85°C
Max
V
V
VIN = VIH IOH = –100 µA
IOH = –4 mA
IOH = –8 mA
V
IOH = –16 mA
IOH = –24 mA
IOH = –32 mA
1.65
0.0
0.1
0.1
1.8
0.0
0.1
0.1
2.3
0.0
0.1
0.1
3.0
0.0
0.1
0.1
V
VIN = VIL IOL = 100 µA
4.5
0.0
0.1
0.1
1.65
0.08
0.24
0.24
IOL = 4 mA
2.3
0.10
0.3
0.3
IOL = 8 mA
0.15
0.4
0.4
3.0
0.22
0.55
0.55
4.5
0.22
0.55
0.55
±1
±10
µA
VIN = 5.5V, GND
0.0
1
10
µA
VIN or VOUT = 5.5V
1.65 to 5.5
2.0
20
µA
VIN = 5.5V, GND
0 to 5.5
2
V
IOL = 16 mA
3.0
IOL = 24 mA
IOL = 32 mA
Symbol
tPLH,
Parameter
Propagation Delay
tPHL
tPLH,
Propagation Delay
tPHL
TA = +25°C
VCC
TA = −40°C to +85°C
(V)
Min
Typ
Max
Min
Max
1.65
2.0
5.5
12.0
2.0
12.7
1.8
2.0
4.6
10
2.0
10.5
2.5 ± 0.2
0.8
3.0
7.0
0.8
7.5
3.3 ± 0.3
0.5
2.4
4.7
0.5
5.0
5.0 ± 0.5
0.5
1.9
4.1
0.5
4.4
3.3 ± 0.3
1.5
3.0
5.2
1.5
5.5
5.0 ± 0.5
0.8
2.4
4.5
0.8
4.8
CIN
Input Capacitance
0
4
CPD
Power Dissipation
3.3
20
Capacitance
5.0
26
Units
ns
Conditions
CL = 15 pF,
Fig. No.
Figures
1, 3
RL = 1MΩ
ns
CL = 50 pF,
RL = 500Ω
Figures
1, 3
(Note 3)
Figure 2
pF
pF
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression:
ICCD = (C PD) (VCC) (fIN) + (ICCstatic).
AC Loading and Waveforms
CL includes load and stray capacitance.
Input PRR = 1.0 MHz, tw = 500 ns.
FIGURE 1. AC Test Circuit
FIGURE 3. AC Waveforms
Input = AC Waveforms; tr = tf = 1.8 ns;
PRR = 10 MHz; Duty Cycle = 50%
FIGURE 2. ICCD Test Circuit
3
www.fairchildsemi.com
NC7SZ32
AC Electrical Characteristics
NC7SZ32
Tape and Reel Specification
TAPE FORMAT
Package
Designator
Tape
Number
Cavity
Section
Cavities
Status
Status
125 (typ)
Empty
Sealed
Sealed
Leader (Start End)
M5, P5
Carrier
M5X, P5X
Cover Tape
250
Filled
Trailer (Hub End)
75 (typ)
Empty
Sealed
Leader (Start End)
125 (typ)
Empty
Sealed
3000
Filled
Sealed
75 (typ)
Empty
Sealed
Carrier
Trailer (Hub End)
TAPE DIMENSIONS inches (millimeters)
Package
SC70-5
SOT23-5
Tape Size
8 mm
8 mm
www.fairchildsemi.com
DIM A
DIM B
0.093
0.096
(2.35)
(2.45)
0.130
0.130
(3.3)
(3.3)
DIM F
DIM Ko
0.138 ± 0.004 0.053 ± 0.004
(3.5 ± 0.10)
(1.35 ± 0.10)
0.138 ± 0.002 0.055 ± 0.004
(3.5 ± 0.05)
4
(1.4 ± 0.11)
DIM P1
DIM W
0.157
0.315 ± 0.004
(4)
(8 ± 0.1)
0.157
0.315 ± 0.012
(4)
(8 ± 0.3)
NC7SZ32
Tape and Reel Specification
(Continued)
REEL DIMENSIONS inches (millimeters)
Tape
Size
8 mm
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165
0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(177.8)
(1.50)
(13.00)
(20.20)
(55.00)
(8.40 + 1.50/−0.00)
(14.40)
(W1 + 2.00/−1.00)
5
www.fairchildsemi.com
NC7SZ32
Physical Dimensions inches (millimeters) unless otherwise noted
5-Lead SOT23, JEDEC MO-178, 1.6mm
Package Number MA05B
www.fairchildsemi.com
6
NC7SZ32 TinyLogic UHS 2-Input OR Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
Package Number MAA05A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com