HIGH FREQUENCY THRU-HOLE SERIES n CMOS COMPATIBLE WITH TRI-STATE OUTPUT n THRU-HOLE OSCILLATORS IN METAL PACKAGE AVAILABLE IN 14-PIN/ FULL SIZE (P1100-3SD) OR 8-PIN/ HALF SIZE (SQ3300D) n 3RD OVERTONE CRYSTAL USED n LOW JITTER (SEE TABLE NEXT PAGE) STANDARD SPECIFICATIONS: Frequency Range Frequency Stability over Operating Temperature Range Operating Temperature Range Input Voltage (Vcc) Symmetry (Duty Cycle) (See next page for definition.) Input Current (Icc) & Rise and Fall Time (Tr & Tf) & Jitter Logic “1” & Logic “0” (See next page) Tri-state Output Output Load Packaging (mounted on ESD pads) 70.000 MHz – 160.000 MHz (Consult factory for specific available frequencies) ± 50 PPM is standard, but ± 25 PPM is also available. 0 - 70°C is standard, but can be extended to -40 to +85°C. 5 Volt ± 10% is standard, but 3.3 Volt ± 10% also available. 40/60 - 60/40% is standard, but 45/55% symmetry at 50% of Vcc is also available. Depends on frequency and output load. See next page. 90% of Vcc MIN.; 10% of Vcc MAX. Normal output when pin #1 is open (no connection); Normal output when pin #1 is at logic “1”; High-impedance output when pin #1 is at logic “0”. Can drive up to 50pF load (P11) 50 parts per pad, (SQ) 70 parts per pad, 10 pads per bundle PART NUMBERING GUIDE: n The Pletronics part number for this third overtone oscillator series consists of the following 4 elements: 1. Model Number Series: P1145-3SD: 14-Pin (Full Size) Thru-Hole; SQ3345D: 8-Pin (Half Size) Thru-Hole 2. Overall Frequency Stability over Operating Temperature Range: P1145-3SD: ± 50 PPM; P1144-3SD: ± 25 PPM 3. Optional Alphabet Designator for Special Requirement: P1145-3SD: standard specifications; P1145-3SDE: operating temperature range of -40 to +85°C; P1145-3SDS: 45/55% symmetry at 50% of Vcc (CMOS); P1145-3SDV: operates at Vcc = 3.3V (There are other alphabet designators not listed here.) 4. Frequency of Operation in MHz EXAMPLES: P1145-3SDV-70.000MHz; SQ3344DE-70.000MHz, SQ3345DS-70.000MHz n When customer’s requirements are non-standard, a special engineering part number will be assigned. (continued) Telephone: (425) 776-1880, Fax: (425) 776-2760, e-mail: [email protected] O14A HIGH FREQUENCY THRU-HOLE SERIES Input Current (Icc), Rise and Fall time with 15pF Load & Jitter Frequency Range (MHz) 70.000 – 79.999 80.000 – 110.000 110.001 – 119.999 120.000 – 160.000 Icc (mA) Typical 40.0 75.0 80.0 90.0 Maximum 45.0 80.0 90.0 95.0 Tr & Tf (nS) Typical 2.0 0.5 0.5 0.5 Maximum 3.0 1.0 1.0 1.0 Recommended Test Circuit with CMOS Load Period Jitter RMS Values (pS) àcontact factory Typical Maximum à à 2.6 2.9 à à 1.8 1.9 Waveform TR TF Vcc 80% Logic 1 Logic 1 (90% Vcc MIN) 50% Logic 0 50% Logic 1 20% Logic 0 GND Logic 0 (10% Vcc MAX) Symmetry P1100-3SD/SQ3300D *CL (Capacitive Load): Includes the input capacitance of oscilloscope. Package Outlines (NOT TO SCALE): P1100-3SD PIN CONNECTIONS PIN CONNECTION 1 ENABLE/DISABLE INPUT 7 GROUND 8 OUTPUT 14 Vcc SQ3300D PIN CONNECTIONS PIN CONNECTION 1 ENABLE/DISABLE INPUT 4 GROUND 5 OUTPUT 8 Vcc INCHES (MILLIMETERS) October 2000 O14B Pletronics Inc., 19013 36th Ave. W., Suite H, Lynnwood, WA 98036-5761 USA