Tools D914™ Automatic Impact Tool The D914 Automatic Impact Tool is the only combination impact and torque tool designed to meet your wire termination requirements. The handle of the D914 is specially designed to accommodate your existing D814™ blades, the new screwdriver, and adapter blades. There’s combination impact no need to carry a different tool for each block or function. The D914 meets all industry requirements for wiring 110, Krone, BIX®, and and torque tool handles variety of blocks 66 blocks. Features: • Hook and spudger tools are built into individual slots on the handle of the D914 • Automatic impact, can select low impact for 24 and 26 gauge wire or high impact for 22 gauge wire • New screwdriver blade, easily inserted phillips-head or flat screwdriver blade • Convenient blade storage built into the end of the D914 handle • New adapter blade allows technician to use a variety of torque tool bits and sockets from your tool kit • Industry standard, internationally accepted • Easy blade insertion, locks in place Part Numbers: D914 Automatic Impact Tool . . . . . . . . . .P/N 10051-000 D914 Tool with Screwdriver Blade . . . . . .P/N 10051-150 D914 Adapter Blade . . . . . . . . . . . . . . . . .P/N 10051-300 D914 Screwdriver Blade . . . . . . . . . . . . . .P/N 10051-200 Communications Products Division 809 Calle Plano, Camarillo, CA 93012-8519 USA www.harris.com 1-800-437-2266 or 1-805-987-9511 PB No. 2008 5/99 D914 is a trademark of Harris Corporation. All other trademarks belong to their respective companies. © 1999 HARRIS CORPORATION next level solutions