ADVANCED CERAMICS AND MODULES DATA SHEET Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode Surface mount ceramic multilayer capacitors Product specification Supersedes data of 7th June 1999 File under Advanced Ceramics and Modules, ACM2 1999 Dec 06 Philips Components Product specification Surface mount ceramic multilayer capacitors FEATURES Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode QUICK REFERENCE DATA • Seven standard sizes DESCRIPTION • High capacitance per unit volume • Supplied in tape on reel or in bulk case • NiSn terminations (AgPd on request). Rated voltage UR (DC) VALUE 16 V, 25 V, 50 V, 100 V, 200 V and 500 V (IEC) Capacitance range (E12 series); note 1: 16 V 4.7 nF to 100 nF 25 V 3.3 nF to 220 nF APPLICATIONS 50 V; note 2 100 pF to 470 nF • Consumer electronics, for example: 100 V 180 pF to 330 nF 200 V 180 pF to 120 nF 500 V 470 pF to 15 nF – Tuners – Television receivers Tolerance on capacitance – Video recorders Test voltage (DC) for 1 minute: – All types of cameras • Telecommunications • Automotive • Data processing. DESCRIPTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved precious metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. 16 V, 25 V, 50 V and 100 V 2.5 × UR 200 V 3 × UR 500 V 2 × UR Sectional specifications IEC 60384-10, second edition 1989-04; also based on CECC 32 100 Detailed specification based on CECC 32 101-801 Climatic category (IEC 60068) 55/125/56 Notes 1. Non E12 values are available on request. 2. Also applicable for applications up to 63 V. terminations , , , The inner electrodes are connected to the two terminations, either by silver palladium (AgPd) alloy in the ratio 65 : 35, or silver dipped with a barrier layer of plated nickel and finally covered with a layer of plated tin (NiSn). A cross section of the structure is shown in Fig.1. ±20%; ±10%; ±5% electrodes MLB457 ceramic material Fig.1 Construction of a ceramic multilayer capacitor. 1999 Dec 06 2 Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode MECHANICAL DATA W T L2 L4 L3 MBB211 L1 For dimensions see Table 1. Fig.2 Component outline. Physical dimensions Table 1 Capacitor dimensions T CASE SIZE L1 L2 and L3 MIN. MAX. MIN. MAX. L4 MIN. W Dimensions in millimetres 0402 1.0 ±0.05 0.5 ±0.05 0.45 0.55 0.20 0.30 0.40 0603 1.6 ±0.10 0.8 ±0.07 0.73 0.87 0.25 0.65 0.40 0805 2.0 ±0.10 1.25 ±0.10 0.50 1.35 0.25 0.75 0.55 1206 3.2 ±0.15 1.6 ±0.15 0.50 1.75 0.25 0.75 1.40 1210 3.2 ±0.20 2.5 ±0.20 0.50 1.80 0.25 0.75 1.40 1812 4.5 ±0.20 3.2 ±0.20 0.50 1.80 0.25 0.75 2.20 2220 5.7 ±0.20 5.0 ±0.20 0.50 1.80 0.25 0.75 2.90 Dimensions in inches 0402 0.040 ±0.002 0.020 ±0.002 0.018 0.022 0.008 0.012 0.016 0603 0.063 ±0.004 0.032 ±0.003 0.029 0.035 0.010 0.026 0.016 0805 0.079 ±0.004 0.049 ±0.004 0.020 0.053 0.010 0.030 0.022 1206 0.126 ±0.006 0.063 ±0.006 0.020 0.069 0.010 0.030 0.056 1210 0.126 ±0.008 0.098 ±0.008 0.020 0.072 0.010 0.030 0.056 1812 0.177 ±0.008 0.126 ±0.008 0.020 0.072 0.010 0.030 0.088 2220 0.224 ±0.008 0.197 ±0.008 0.020 0.072 0.010 0.030 0.114 1999 Dec 06 3 Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 16 V and 25 V Noble Metal Electrode SELECTION CHART FOR 16 V AND 25 V LAST TWO DIGITS OF 12NC C (nF) 3.3 3.9 4.7 5.6 6.8 29 31 32 33 34 8.2 10 12 15 18 22 27 33 39 47 56 68 35 36 37 38 39 41 42 43 44 45 46 47 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 16 V 0402 25 V 0603 0805 1206 0402 0603 0805 1206 1210 0.5 ±0.05 0.5 ±0.05 0.8 ±0.07 0.6 ±0.1 0.8 ±0.07 0.6 ±0.1 48 49 51 52 53 54 55 56 57 58 59 61 62 63 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 1.15 ±0.1 0.5 to 1.0 1.25 ±0.1 0.9 to 1.3 1.15 ±0.1 Values in shaded cells indicate thickness classification. Thickness classification and packaging quantities THICKNESS CLASSIFICATION (mm) 0.5 ±0.05 0.6 ±0.1 0.85 ±0.1 0.5 to 1.0 0.8 ±0.07 0.9 to 1.3 1.15 ±0.1 1.25 ±0.1 1999 Dec 06 8 mm TAPE WIDTH AMOUNT PER REEL ∅180 mm; 7" AMOUNT PER BULK CASE ∅330 mm; 13" PAPER BLISTER PAPER BLISTER 0402 0603 0805 10000 4000 4000 − 4000 − − − − − − 4000 − 3000 3000 3000 50000 20000 15000 − 15000 − − − − − − 10000 − 10000 10000 10000 50000 − − − − − − − − − − − 15000 − − − − 10000 8000 − − − − 5000 4 Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 16 V and 25 V Noble Metal Electrode ORDERING INFORMATION FOR 16 V AND 25 V Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC. Clear text code Example: 08052R104K8BB00 SIZE CODE 0402 TEMP. CHAR. 2R = X7R 0603 0805 1206 1210 CAPACITANCE TOL. VOLTAGE TERMINATION 104 = 100000 pF; the third digit signifies the multiplying factor: 2 = × 100 3 = × 1000 4 = × 10000 5 = × 100000 J = ±5% 7 = 16 V B = Ni-barrier K = ±10% 8 = 25 V M = ±20% PACKAGING MARKING 2 = 180 mm; 7" paper 0 = no marking 3 = 330 mm; 13" paper 2 = 2-character marking in North America only B = 180 mm; 7" blister F = 330 mm; 13" blister P = bulk case Ordering code 12NC handbook, full pagewidth 2 2 X X X X X X 6 X X X Carrier type 22 blister 38 paper 54 bulk Capacitance value(1) Rated voltage - Termination 78 16 V; Ni-barrier 91 25 V; Ni-barrier Tolerance 5 ±5% 6 ±10% 7 ±20% Size 7 0402 6 0603 0 0805 1 1206 2 1210 CCA611 Packaging(2) 1 reel: ∅180 mm; 7" 5 reel: ∅330 mm; 13" 4 bulk case (1) Refer to chapter “Selection chart for 16 V and 25 V”. (2) Amount on reel depends on thickness classification, see section “Thickness classification and packaging quantities”. 1999 Dec 06 5 SERIES 0 = conv. ceramic Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 50 V Noble Metal Electrode SELECTION CHART FOR 50 V C (pF) LAST TWO DIGITS OF 12NC 100 01 120 02 150 03 180 04 220 05 270 06 330 07 390 08 470 09 560 11 680 12 820 13 1000 14 1200 15 1500 16 1800 17 2200 18 2700 19 3300 21 3900 22 4700 23 5600 24 6800 25 8200 26 10000 27 12000 28 15000 29 18000 31 22000 32 27000 33 33000 34 39000 35 47000 36 56000 37 68000 38 82000 39 100000 41 120000 42 150000 43 180000 44 220000 45 270000 46 330000 47 390000 48 470000 49 560000 51 680000 52 820000 53 1000000 54 1999 Dec 06 50 V 0402 0603 0805 1206 1210 1812 2220 0.5 ±0.05 0.8 ±0.07 0.6 ±0.1 0.85 ±0.1 0.5 to 1.0 0.85 ±0.1 1.25 ±0.1 1.15 ±0.1 0.9 to 1.3 0.5 to 1.0 0.5 to 1.0 0.9 to 1.3 Values in shaded cells indicate thickness classification. 0.9 to 1.3 6 Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 50 V Noble Metal Electrode Thickness classification and packaging quantities 8 mm TAPE WIDTH AMOUNT PER REEL THICKNESS CLASSIFICATION (mm) ∅180 mm; 7" 12 mm TAPE WIDTH AMOUNT PER REEL ∅330 mm; 13" AMOUNT PER BULK CASE ∅180 mm; 7" BLISTER PAPER BLISTER PAPER BLISTER 1812 2220 0402 0603 0805 0.5 ±0.05 0.6 ±0.1 0.85 ±0.1 0.5 to 1.0 10000 4000 4000 − − − − 4000 50000 20000 15000 − − − − 10000 − − − 2000 − − − 1500 50000 − − − − − − − − 10000 8000 − 0.8 ±0.07 0.9 to 1.3 1.15 ±0.1 1.25 ±0.1 4000 − − − − 3000 3000 3000 15000 − − − − 10000 10000 10000 − 1500 − − − 1500 − − − − − − 15000 − − − − − − 5000 ORDERING INFORMATION FOR 50 V Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC. Clear text code EXAMPLE: 08052R104K9BB00 SIZE CODE 0402 TEMP. CHAR. 2R = X7R 0603 0805 1206 1210 1812 2220 CAPACITANCE TOL. 104 = 100000 pF; the third digit signifies the multiplying factor: 1 = × 10 2 = × 100 3 = × 1000 4 = × 10000 5 = × 100000 J = ±5% VOLTAGE 9 = 50 V K = ±10% M = ±20% TERMINATION PACKAGING MARKING B = Ni-barrier 2 = 180 mm; 7" paper 0 = no marking A = AgPd (2220 only) 3 = 330 mm; 13" paper 2 = 2-character marking in North America only B = 180 mm; 7" blister F = 330 mm; 13" blister P = bulk case Ordering code 12NC handbook, full pagewidth 2 2 X X X X X X 6 X X X Carrier type 22 blister 38 paper 54 bulk Capacitance value(1) Rated voltage - Termination 58 50 V; Ni-barrier 59 50 V; AgPd (2220 only) Tolerance 5 ±5% 6 ±10% 7 ±20% Size 7 0402 6 0603 0 0805 1 1206 2 1210 4 1812 5 2220 CCA612 Packaging(2) 1 reel: ∅180 mm; 7" 5 reel: ∅330 mm; 13" 4 bulk case (1) Refer to chapter “Selection chart for 50 V”. (2) Amount on reel depends on thickness classification, see section “Thickness classification and packaging quantities”. 1999 Dec 06 7 SERIES 0 = conv. ceramic Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 100 V, 200 V and 500 V Noble Metal Electrode SELECTION CHART FOR 100 V, 200 V AND 500 V C (pF) LAST TWO DIGITS OF 12NC 180 13 220 14 270 15 330 16 390 17 470 18 560 19 680 21 820 22 1000 23 1200 24 1500 25 1800 26 2200 27 2700 28 3300 29 3900 31 4700 32 5600 33 6800 34 8200 35 10000 36 12000 37 15000 38 18000 39 22000 41 27000 42 33000 43 39000 44 47000 45 56000 46 68000 47 82000 48 100000 49 120000 51 150000 52 180000 53 220000 54 270000 55 330000 56 1999 Dec 06 100 V 0805 1206 1210 200 V 1812 0805 1206 1210 500 V 1812 0.85 ±0.1 1206 1210 1812 1.15 ±0.1 0.6 ±0.1 0.85 ±0.1 0.85 ±0.1 0.9 to 1.3 1.25 ±0.1 1.2 to 1.75 0.9 to 1.3 0.85 ±0.1 1.15 ±0.1 0.8 to 1.0 0.9 to 1.3 0.5 to 1.0 0.5 to 1.0 1.15 ±0.1 0.9 to 1.3 0.9 to 1.3 0.5 to 1.0 0.9 to 1.3 Values in shaded cells indicate thickness classification. 8 Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 100 V, 200 V and 500 V Noble Metal Electrode Thickness classification and packaging quantities 8 mm TAPE WIDTH AMOUNT PER REEL THICKNESS CLASSIFICATION (mm) ∅180 mm; 7" 12 mm TAPE WIDTH AMOUNT PER REEL ∅330 mm; 13" AMOUNT PER BULK CASE ∅180 mm; 7" BLISTER PAPER BLISTER PAPER BLISTER 1812 0805 0.6 ±0.1 4 000 − 20000 − − 10000 0.85 ±0.1 4000 − 15000 − − 8000 0.8 to 1.0 − 4000 − 10000 − − 0.5 to 1.0 − 4000 − 10000 2000 − 0.9 to 1.3 − 3000 − 10000 1500 − 1.15 ±0.1 − 3000 − 10000 − − 1.25 ±0.1 − 3000 − 10000 − 5000 1.2 to 1.75 − 2500 − 10000 − − ORDERING INFORMATION FOR 100 V, 200 V AND 500 V Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC. Clear text code Example: 18122R104KBBB00 SIZE CODE 0805 TEMP. CHAR. 2R = X7R 1206 1210 1812 CAPACITANCE TOL. VOLTAGE TERMINATION 104 = 100000 pF; the third digit signifies the multiplying factor: 1 = × 10 2 = × 100 3 = × 1000 4 = × 10000 PACKAGING MARKING J = ±5% 0 = 100 V B = Ni-barrier 2 = 180 mm; 7" paper 0 = no marking K = ±10% B = 200 V 3 = 330 mm; 13" paper M = ±20% D = 500 V B = 180 mm; 7" blister 2 = 2-character marking in North America only F = 330 mm; 13" blister P = bulk case Ordering code 12NC handbook, full pagewidth 2 2 X X X X X X 6 X X X Carrier type 22 blister 38 paper 54 bulk Capacitance value(1) Rated voltage - Termination 60 100 V; Ni-barrier 93 200 V; Ni-barrier 97 500 V; Ni-barrier Tolerance 5 ±5% 6 ±10% 7 ±20% Size 0 0805 1 1206 2 1210 4 1812 Packaging(2) 1 reel: ∅180 mm; 7" 5 reel: ∅330 mm; 13" 4 bulk case CCA613 (1) Refer to chapter “Selection chart for 100 V, 200 V and 500 V”. (2) Amount on reel depends on thickness classification, see section “Thickness classification and packaging quantities”. 1999 Dec 06 9 SERIES 0 = conv. ceramic Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode ELECTRICAL CHARACTERISTICS Class 2 capacitors; X7R dielectric; AgPd and NiSn terminations Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1 °C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. DESCRIPTION VALUE Capacitance range (E12 series); note 1 100 pF to 100 nF Tolerance on capacitance after 1000 hours ±20%; ±10%; ±5%; note 2 Tan δ; note 1 ≤2.5%; 16 V range ≤3.5% Insulation resistance after 1 minute at UR (DC): C ≤ 10 nF Rins > 100 GΩ C > 10 nF Rins × C > 1000 seconds Maximum capacitance change as a function of temperature (for typical values see Fig.3) ±15% Ageing typical 1% per time decade Notes 1. Measured at 1 V, 1 kHz, using a four-gauge method. 2. Tolerance of ±1% available on request. MGA488 - 1 handboo, halfpage ∆C C (%) MEA611 - 1 handbook, halfpage 600 15 tan δ (× 10−4) 10 (1) 400 5 (2) 0 (3) −5 200 (4) −10 −15 −40 0 0 40 80 120 T (oC) −40 0 40 80 120 T (oC) Curve 1 = 16 V product. Curve 2 = 25 V product. Curve 3 = 50 V and 100 V products. Curve 4 = 200 V and 500 V products. Fig.3 1999 Dec 06 Typical capacitance change as a function of temperature. Fig.4 Typical tan δ as a function of temperature. 10 Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode MGA448 - 2 0 ∆C C (%) −10 CCA049 0 ∆C C (%) −20 25 V product −20 16 V product 100 V product −40 50 V product −30 −60 −40 −50 −80 0 10 20 30 VDC (V) Fig.5 Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage at 20 °C. Fig.6 MGA446 - 1 0 ∆C C (%) −20 500 V product −40 −60 200 V product −80 −100 0 Fig.7 100 200 300 400 500 VDC (V) Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage at 20 °C. 1999 Dec 06 11 0 20 40 60 100 80 VDC (V) Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage at 20 °C. Philips Components Product specification Surface mount ceramic multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1999 Dec 06 12 Philips Components Surface mount ceramic multilayer capacitors Product specification Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode NOTES 1999 Dec 06 13 Philips Components Surface mount ceramic multilayer capacitors Product specification Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode NOTES 1999 Dec 06 14 Philips Components Surface mount ceramic multilayer capacitors Product specification Class 2, X7R 16/25/50/100/200 and 500 V Noble Metal Electrode NOTES 1999 Dec 06 15 Philips Components – a worldwide company Australia: Philips Components Pty Ltd., HOMEBUSH, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Poland: Philips Poland Sp. z.o.o., WARSZAWA, Tel. +48 22 5710 000, Fax. +48 22 5710 001 Austria: Österreichische Philips Industrie GmbH, WIEN, Tel. +43 1 60 101 12 41, Fax. +43 1 60 101 12 11 Portugal: Philips Portuguesa S.A., Philips Components: LINDA-A-VELHA, Tel. +351 1 416 3160/416 3333, Fax. +351 1 416 3174/416 3366 Belarus: Philips Office Belarus, MINSK, Tel. +375 172 200 924/733, Fax. +375 172 200 773 Benelux: Philips Components B.V., EINDHOVEN, NL, Tel. +31 40 25 90 772, Fax. +31 40 25 90 777 Brazil: Philips Components, SÃO PAULO, Tel. +55 11 821 2333, Fax. +55 11 829 1849 Canada: Philips Electronics Ltd., SCARBOROUGH, Tel. +1 416 292 5161, Fax. +1 416 754 6248 China: Philips Company, SHANGHAI, Tel. +86 21 6354 1088, Fax. +86 21 6354 1060 Denmark: Philips Components A/S, COPENHAGEN V, Tel. +45 3329 3333, Fax. +45 3329 3905 Finland: Philips Components, ESPOO, Tel. +358 9 615 800, Fax. +358 9 615 80510 France: Philips Composants, SURESNES, Tel. +33 1 4099 6161, Fax. +33 1 4099 6493 Germany: Philips Components GmbH, HAMBURG, Tel. +49 40 2489-0, Fax. +49 40 2489 1400 Hong Kong: Philips Hong Kong, KOWLOON, Tel. +852 2784 3000, Fax. +852 2784 3003 Russia: Philips Russia, MOSCOW, Tel. +7 95 755 6918, Fax. +7 95 755 6919 Singapore: Philips Singapore Pte Ltd., SINGAPORE, Tel. +65 350 2000, Fax. +65 355 1758 South Africa: S.A. Philips Pty Ltd., JOHANNESBURG, Tel. +27 11 470 5911, Fax. +27 11 470 5494 Spain: Philips Components, BARCELONA, Tel. +34 93 301 63 12, Fax. +34 93 301 42 43 Sweden: Philips Components, STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Philips Components AG, ZÜRICH, Tel. +41 1 488 22 11, Fax. +41 1 481 7730 Taiwan: Philips Taiwan Ltd., TAIPEI, Tel. +886 2 2134 2900, Fax. +886 2 2134 2929 Turkey: Türk Philips Ticaret A.S., UMRABIYE/ISTANBUL, Tel. +90 216 522 18 00, Fax. +90 216 522 18 14 United Kingdom: Philips Components Ltd., DORKING, Tel. +44 1306 512 000, Fax. +44 1306 512 345 United States: India: Philips India Ltd., MUMBAI, Tel. +91 22 4930 311, Fax. +91 22 4930 966/4950 304 • Philips Components, SAN JOSE, CA, Tel. +1 408 570 5600, Fax. +1 408 570 5700 Indonesia: P.T. Philips Development Corp., JAKARTA, Tel. +62 21 794 0040, Fax. +62 21 794 0080 • Philips Display Components, ANN ARBOR, MI, Tel. +1 734 996 9400, Fax. +1 734 761 2776 Ireland: Philips Electronics (Ireland) Ltd., DUBLIN, Tel. +353 1 7640 203, Fax. +353 1 7640 210 • Philips Discrete Ceramics, CHARLOTTE, NC, Tel. +1 915 860 3267, Fax. +1 915 860 3270 Israel: Rapac Electronics Ltd., TEL AVIV, Tel. +972 3 6450 444, Fax. +972 3 6491 007 • Philips Ferrite Ceramics, ROSWELL, GA, Tel. +1 877 433 77483, Fax. +1 770 992 0725 Italy: Philips Components S.r.l., MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557 Yugoslavia (Federal Republic of): Philips Components, BELGRADE, Tel. +381 11 625 344 / +381 11 3341 299, Fax. +381 11 635 777 Japan: Philips Japan Ltd., TOKYO, Tel. +81 3 3740 5135, Fax. +81 3 3740 5035 Internet: Korea (Republic of): Philips Electronics (Korea) Ltd., SEOUL, Tel. +82 2 709 1472, Fax. +82 2 709 1480 • Discrete and Ferrite Ceramics: www.acm.components.philips.com • Display Components: www.philipsdisplay.com Malaysia: Philips Malaysia SDN Berhad, Components Division, PULAU PINANG, Tel. +60 3 750 5213, Fax. +60 3 757 4880 For all other countries apply to: Philips Components, Building BAE-1, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 22 599 Mexico: Philips Components, EL PASO, U.S.A., Tel. +52 915 772 4020, Fax. +52 915 772 4332 COD33 New Zealand: Philips New Zealand Ltd., AUCKLAND, Tel. +64 9 815 4000, Fax. +64 9 849 7811 Norway: Philips Components, STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Pakistan: Philips Electrical Industries of Pakistan Ltd., KARACHI, Tel. +92 21 587 4641-49, Fax. +92 21 577 035/+92 21 587 4546 Printed in The Netherlands Philippines: Philips Semiconductors Philippines Inc., METRO MANILA, Tel. +63 2 816 6345, Fax. +63 2 817 3474 041010/500/03/pp16 Document order number: © Philips Electronics N.V. 1999 Date of release: 1999 Dec 06 9397 378 57011